On 17/01/2019 10:46:50+0000, Jan Kotas wrote: > > > On 16 Jan 2019, at 22:08, Rob Herring <r...@kernel.org> wrote: > > > > > > On Fri, Jan 11, 2019 at 03:14:00PM +0000, Jan Kotas wrote: > >> This patch adds a DT binding documentation for > >> Cadence RTC controller. > >> +Required properties: > >> +- compatible: Should be "cdns,rtc-r109v3" > >> +- reg: Specifies base physical address and size of the register area. > >> +- interrupts: A single interrupt specifier. > >> +- clocks: Must contain two entries: > >> + - pclk: APB registers clock > >> + - ref_clk: reference 1Hz of 100Hz clock, depending on IP configuration > > > > 1Hz OR 100Hz? > > Hi, > > The IP has a configuration parameter at build time, > which selects the reference clock frequency. > > It cannot be changed later, and there’s no register which > tells the software which option was selected. > > In this version of the patch, both values are accepted. > If it makes sense I can add a bool property, like > refclock-100hz, which can be used to check the clock frequency. >
I guess what rob suggested was s/of/or/ -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
