Hi Kishon, >-----Original Message----- >From: Kishon Vijay Abraham I [mailto:kis...@ti.com] >Sent: Wednesday, January 16, 2019 1:38 PM >To: Anurag Kumar Vulisha <anura...@xilinx.com>; robh...@kernel.org; Mark >Rutland <mark.rutl...@arm.com>; vivek.gau...@codeaurora.org >Cc: Michal Simek <mich...@xilinx.com>; v.anuragku...@gmail.com; sundeep >subbaraya <sundeep.l...@gmail.com>; Ajay Yugalkishore Pandey ><apan...@xilinx.com>; linux-kernel@vger.kernel.org; linux-arm- >ker...@lists.infradead.org; devicet...@vger.kernel.org >Subject: Re: [PATCH v5 2/2] phy: zynqmp: Add phy driver for xilinx zynqmp phy >core > >Hi, > >On 18/12/18 7:15 PM, Anurag Kumar Vulisha wrote: >> ZynqMP SoC has a Gigabit Transceiver with four lanes. All the high >> speed peripherals such as USB, SATA, PCIE, Display Port and Ethernet >> SGMII can rely on any of the four GT lanes for PHY layer. This patch >> adds driver for that ZynqMP GT core. >> >> Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vuli...@xilinx.com> >> --- >> Changes in v5: >> 1. No functional changes. Added missing Author name >> >> Changes in v4: >> 1. Moved include/dt-bindings/phy/phy.h into patch 1 as suggested by >> "Rob Herring" >> >> Changes in v3: >> 1. Corrected the Documentation as suggested by "Vivek Gautam" >> >> Changes in v2: >> 1. Fixed the compilation error when compiled phy-zynqmp.c as a module >> 2. Added CONFIG_PM macro in phy-zynqmp.c driver >> --- >> drivers/phy/Kconfig | 8 + >> drivers/phy/Makefile | 1 + >> drivers/phy/phy-zynqmp.c | 1582 >++++++++++++++++++++++++++++++++++++++++ >> include/linux/phy/phy-zynqmp.h | 52 ++ >> 4 files changed, 1643 insertions(+) >> create mode 100644 drivers/phy/phy-zynqmp.c create mode 100644 >> include/linux/phy/phy-zynqmp.h >> >> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index >> 60f949e..7a3c900 100644 >> --- a/drivers/phy/Kconfig >> +++ b/drivers/phy/Kconfig >> @@ -40,6 +40,14 @@ config PHY_XGENE >> help >> This option enables support for APM X-Gene SoC multi-purpose PHY. >> >> +config PHY_XILINX_ZYNQMP >> + tristate "Xilinx ZynqMP PHY driver" >> + depends on ARCH_ZYNQMP >> + select GENERIC_PHY >> + help >> + Enable this to support ZynqMP High Speed Gigabit Transceiver >> + that is part of ZynqMP SoC. >> + >> source "drivers/phy/allwinner/Kconfig" >> source "drivers/phy/amlogic/Kconfig" >> source "drivers/phy/broadcom/Kconfig" >> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index >> 0301e25..2335e85 100644 >> --- a/drivers/phy/Makefile >> +++ b/drivers/phy/Makefile >> +/** >> + >> +/** >> + * xpsgtr_override_deemph - override PIPE TX de-emphasis >> + * @phy: pointer to phy >> + * @plvl: pre-emphasis level >> + * @vlvl: voltage swing level >> + * >> + * Return: None >> + */ >> +void xpsgtr_override_deemph(struct phy *phy, u8 plvl, u8 vlvl) { >> + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy); >> + struct xpsgtr_dev *gtr_dev = gtr_phy->data; >> + static u8 pe[4][4] = { { 0x2, 0x2, 0x2, 0x2 }, >> + { 0x1, 0x1, 0x1, 0xFF }, >> + { 0x0, 0x0, 0xFF, 0xFF }, >> + { 0xFF, 0xFF, 0xFF, 0xFF } }; >> + >> + writel(pe[plvl][vlvl], >> + gtr_dev->serdes + gtr_phy->lane * L0_TX_ANA_TM_18_OFFSET + >> + L0_TX_ANA_TM_18); >> +} >> +EXPORT_SYMBOL_GPL(xpsgtr_override_deemph); > >I thought I gave a feedback to get rid of export symbol. This will make the >consumer >driver tied to this PHY driver. >
Thanks a lot for spending your time in reviewing this patch. With the current implementation, if phy-zynqmp.c driver is not compiled and consumer driver calls xpsgtr_override_deemph() routine, static inline function in phy-zynqmp.h gets called and error -ENODEV is returned. So, with the current implementation the consumer driver is already depending on phy-zynqmp.c driver. Please correct me if my understanding is wrong Best Regards, Anurag Kumar Vulisha
