On 18/01/2019 04:54, Rajendra Nayak wrote: > On 1/17/2019 8:33 PM, Marc Gonzalez wrote: > >> On 10/01/2019 05:02, Rajendra Nayak wrote: >> >>> Rajendra Nayak (9): >>> dt-bindings: opp: Introduce opp-level bindings >>> OPP: Add support for parsing the 'opp-level' property >>> dt-bindings: power: Add qcom rpm power domain driver bindings >>> soc: qcom: rpmpd: Add a Power domain driver to model corners >>> soc: qcom: rpmpd: Add support for get/set performance state >>> arm64: dts: msm8996: Add rpmpd device node >>> soc: qcom: rpmhpd: Add RPMh power domain driver >>> arm64: dts: sdm845: Add rpmh powercontroller node >>> soc: qcom: rpmhpd: Mark mx as a parent for cx >>> >>> Documentation/devicetree/bindings/opp/opp.txt | 3 + >>> .../devicetree/bindings/power/qcom,rpmpd.txt | 145 +++++++ >>> arch/arm64/boot/dts/qcom/msm8996.dtsi | 34 ++ >>> arch/arm64/boot/dts/qcom/sdm845.dtsi | 51 +++ >> >> Whenever I see these patches adding support for msm8996 (aka sdm820) and >> sdm845 >> simultaneously, I think to myself: "Why is sdm835 being left out? It was >> released >> between sdm820 and sdm845, it cannot be /that/ different." > > It isn't that different, and it should be quite straight forward to add > support for it > with the rpmpd driver (the rpmhpd is for platforms sdm845 and beyond which > use rpmh) > > When I started working on these patches, support for sdm835 upstream was > non-existent > so I started off with what was the better supported one which was the 820 > (msm8996).
Once you land this patch series, could you take a quick look at how much work is needed to add msm8998 support? I'm betting it would take you only a few hours. Regards.
