On Sat, 19 Jan 2019 10:00:29 +0100, Sam Ravnborg wrote: > The NXP pcf85063 supports two different xtal load capacitance > - 7000fF (7pF) HW default, Linux driver default > - 12500fF (12.5pF) Minimum power consumption > > To obtain a precise RTC the pcf85063 must be configured > with the correct capacitance load of the xtal. > > Add a property to specify the xtal capacitance load. > The default value matches that of the current Linux driver. > > With a dedicated binding remove the entry in rtc.txt > > Signed-off-by: Søren Andersen <[email protected]> > Signed-off-by: Sam Ravnborg <[email protected]> > Cc: Alessandro Zummo <[email protected]> > Cc: Alexandre Belloni <[email protected]> > Cc: Rob Herring <[email protected]> > Cc: Mark Rutland <[email protected]> > Cc: Urs Fässler <[email protected]> > --- > Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt | 18 > ++++++++++++++++++ > Documentation/devicetree/bindings/rtc/rtc.txt | 1 - > 2 files changed, 18 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt >
Reviewed-by: Rob Herring <[email protected]>
