On Tue 22 Jan 15:16 PST 2019, Doug Anderson wrote: > Hi, > > On Mon, Jan 21, 2019 at 9:52 PM Bjorn Andersson > <bjorn.anders...@linaro.org> wrote: > > > > Update existing and add all missing PIL regions to the reserved memory > > map, as described in version 10. > > > > Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org> > > --- > > > > Changes since v2: > > - New patch > > > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 61 ++++++++++++++++++++++++++-- > > 1 file changed, 58 insertions(+), 3 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > index 0ec827394e92..cdcac3704c13 100644 > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > @@ -89,12 +89,47 @@ > > }; > > > > memory@86200000 { > > - reg = <0 0x86200000 0 0x2d00000>; > > + reg = <0 0x86200000 0 0x100000>; > > no-map; > > }; > > > > - wlan_msa_mem: memory@96700000 { > > - reg = <0 0x96700000 0 0x100000>; > > + memory@86300000 { > > + reg = <0 0x86300000 0 0x4800000>; > > + no-map; > > + }; > > I know it's not a problem upstream (yet), but downstream this collides > with a memory region in the cheza board. We have: > > rmtfs@88f00000 { > compatible = "qcom,rmtfs-mem"; > reg = <0x0 0x88f00000 0x0 0x800000>; > no-map; > > qcom,client-id = <1>; > }; > > ...and the above region overlays it since it goes till 0x8ab00000 >
Digging through the table again I see that there's another level here, so it seems only the first 44MB of these 78MB are reserved for non-APSS things. So this should actually be 0x2c00000 long. I will update this and we'll have one conflict less. > > > + > > + memory@8ab00000 { > > + reg = <0 0x8ab00000 0 0x1400000>; > > + no-map; > > + }; > > + > > + memory@8bf00000 { > > + reg = <0 0x8bf00000 0 0x500000>; > > + no-map; > > + }; > > + > > + ipa_fw_mem: memory@8c400000 { > > + reg = <0 0x8c400000 0 0x10000>; > > + no-map; > > + }; > > + > > + ipa_gsi_mem: memory@8c410000 { > > + reg = <0 0x8c410000 0 0x5000>; > > + no-map; > > + }; > > + > > + memory@8c415000 { > > + reg = <0 0x8c415000 0 0x2000>; > > + no-map; > > + }; > > + > > + adsp_mem: memory@8c500000 { > > + reg = <0 0x8c500000 0 0x1a00000>; > > + no-map; > > + }; > > + > > + wlan_msa_mem: memory@8df00000 { > > Your patch moves 'wlan_msa_mem' from 0x96700000 to 0x8df00000. Is > that OK? I haven't been involved in all of the previous discussions > but if everything is all OK w/ the device tree just moving this chunk > around (without any other coordination w/ firmware) it seems really > weird that we even need to specify it in the device tree. ...but > maybe I shouldn't open this can of worms. You can pretend I didn't > say anything. > 0x96700000 seems to be reserved for the sensor core, so either WiFi wasn't actually tested before, or more likely its firmware is position independent. Most (all?) firmware is position independent, but the security configuration prevents us from relocating it. One such example is that the ADSP in the newer firmware versions are not allowed to execute from the old memory region. Regards, Bjorn