Anand Moon <linux.am...@gmail.com> writes:
> Add missing vbus-supply link to phy controller for usb_phy0
> and usb_phy1 nodes, this changes fixed the power issue
> on usb ports usb, changes help fix usb reset warning.
>
> [ 821.991470] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 825.243385] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 828.151310] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 830.991241] usb 1-1.2: reset high-speed USB device number 3 using dwc2
>
> Fixes: 2eb79a4d15ff (ARM: dts: meson: enabling the USB Host controller on
> Odroid-C1/C1+ board)
> Cc: Martin Blumenstingl <martin.blumensti...@googlemail.com>
> Cc: Jerome Brunet <jbru...@baylibre.com>
> Cc: Neil Armstrong <narmstr...@baylibre.com>
> Signed-off-by: Anand Moon <linux.am...@gmail.com>
> ---
> Rebased on Kevin's amlogic/v5.0/fixes branch
As requested, dropping this series from the fixes branch pending further
debug and testing.
Kevin
> [alarm@archl-c1t ~]$ lsusb -t
> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
> |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
> |__ Port 3: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
> |__ Port 3: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
> |__ Port 3: Dev 3, If 2, Class=Audio, Driver=snd-usb-audio, 480M
> |__ Port 3: Dev 3, If 3, Class=Audio, Driver=snd-usb-audio, 480M
> [alarm@archl-c1t ~]$
> [alarm@archl-c1t ~]$ lsusb -v|egrep "^Bus|MaxPower"
> Couldn't open device, some information will be missing
> Bus 001 Device 003: ID 1b71:0056 Fushicai
> MaxPower 500mA
> Couldn't open device, some information will be missing
> Bus 001 Device 004: ID 152d:0578 JMicron Technology Corp. / JMicron USA
> Technology Corp. JMS567 SATA 6Gb/s bridge
> MaxPower 30mA
> Couldn't open device, some information will be missing
> Couldn't open device, some information will be missing
> Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> MaxPower 100mA
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> MaxPower 0mA
> ---
> arch/arm/boot/dts/meson8b-odroidc1.dts | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts
> b/arch/arm/boot/dts/meson8b-odroidc1.dts
> index 0f0a46ddf3ff..a49a8509b288 100644
> --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> @@ -83,6 +83,19 @@
> regulator-max-microvolt = <5000000>;
> };
>
> + usb_vbus: regulator-usb-vbus {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "USB_VBUS";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + vin-supply = <&p5v0>;
> +
> + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> tflash_vdd: regulator-tflash_vdd {
> /*
> * signal name from schematics: TFLASH_VDD_EN
> @@ -293,8 +306,18 @@
> pinctrl-names = "default";
> };
>
> +&usb0_phy {
> + status = "okay";
> + vbus-supply = <&usb_vbus>;
> +};
> +
> &usb1_phy {
> status = "okay";
> + vbus-supply = <&usb_vbus>;
> +};
> +
> +&usb0 {
> + status = "okay";
> };
>
> &usb1 {
> --
> 2.20.1
