From: Jan Kiszka <jan.kis...@siemens.com>
Somewhere along recent changes to power control of the wl1835, power-on
became very unreliable on the hikey, failing like this:
wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16
After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms, the
hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
like on the Ultra96.
Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
Acked-by: Ulf Hansson <ulf.hans...@linaro.org>
---
Changes in v2:
- set delay to 10 ms
- updated changelog
Who will take care of updating also the Hikey firmware dts with this
change?
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 610235028cc7..ba946543dd0a 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -118,6 +118,7 @@
reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
clocks = <&pmic>;
clock-names = "ext_clock";
+ post-power-on-delay-ms = <10>;
power-off-delay-us = <10>;
};
--
2.16.4
