From: Jonathan Bakker <xc-rac...@live.ca>
Add device tree bindings for Bosch BMA150 Accelerometer Sensor
Signed-off-by: Jonathan Bakker <xc-rac...@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chm...@gmail.com>
---
.../bindings/input/bosch,bma150.txt | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/bosch,bma150.txt
diff --git a/Documentation/devicetree/bindings/input/bosch,bma150.txt
b/Documentation/devicetree/bindings/input/bosch,bma150.txt
new file mode 100644
index 000000000000..290c60e38c70
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/bosch,bma150.txt
@@ -0,0 +1,20 @@
+* Bosch BMA150 Accelerometer Sensor
+
+Also works for the SMB380 and BMA023 accelerometers
+
+Required properties:
+- compatible : Should be "bosch,bma150"
+- reg : The I2C address of the sensor
+
+Optional properties:
+- interrupt-parent : should be the phandle for the interrupt controller
+- interrupts : Interrupt mapping for IRQ. If not present device will be polled
+
+Example:
+
+bma150@38 {
+ compatible = "bosch,bma150";
+ reg = <0x38>;
+ interrupt-parent = <&gph0>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+};
--
2.17.1
