Le mardi 22 janvier 2019 à 12:53 +0200, Stanimir Varbanov a écrit : > This ixes an issue when setting the encoder framerate because of
ixes -> fixes > missing precision. Now the frameinterval type is changed to > TYPE_CONTINUOUS and step = 1. Also the math is changed when > framerate property is called - the firmware side expects that > the framerate one is 1 << 16 units. Note sure, maybe you didn't mean to add 'one' here ? Why not just say that that firmware expect values in Q16 ? > > Signed-off-by: Stanimir Varbanov <stanimir.varba...@linaro.org> Looking toward testing it, but I had the bad luck of using an USB storage rootfs, and apparently USB no longer works on 5.0rc+, if you have a baseline tree to suggest, I'll take it. Thanks for this patch. > --- > v2: replace DIV_ROUND_UP with do_div and make roundup manually > > drivers/media/platform/qcom/venus/venc.c | 19 ++++++++++++++----- > 1 file changed, 14 insertions(+), 5 deletions(-) > > diff --git a/drivers/media/platform/qcom/venus/venc.c > b/drivers/media/platform/qcom/venus/venc.c > index 32cff294582f..99c94b155b46 100644 > --- a/drivers/media/platform/qcom/venus/venc.c > +++ b/drivers/media/platform/qcom/venus/venc.c > @@ -31,6 +31,7 @@ > #include "venc.h" > > #define NUM_B_FRAMES_MAX 4 > +#define FRAMERATE_FACTOR (1 << 16) > > /* > * Three resons to keep MPLANE formats (despite that the number of planes > @@ -581,7 +582,7 @@ static int venc_enum_frameintervals(struct file *file, > void *fh, > struct venus_inst *inst = to_inst(file); > const struct venus_format *fmt; > > - fival->type = V4L2_FRMIVAL_TYPE_STEPWISE; > + fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS; > > fmt = find_format(inst, fival->pixel_format, > V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); > @@ -604,12 +605,12 @@ static int venc_enum_frameintervals(struct file *file, > void *fh, > fival->height < frame_height_min(inst)) > return -EINVAL; > > - fival->stepwise.min.numerator = 1; > + fival->stepwise.min.numerator = FRAMERATE_FACTOR; > fival->stepwise.min.denominator = frate_max(inst); > - fival->stepwise.max.numerator = 1; > + fival->stepwise.max.numerator = FRAMERATE_FACTOR; > fival->stepwise.max.denominator = frate_min(inst); > fival->stepwise.step.numerator = 1; > - fival->stepwise.step.denominator = frate_max(inst); > + fival->stepwise.step.denominator = 1; > > return 0; > } > @@ -654,6 +655,7 @@ static int venc_set_properties(struct venus_inst *inst) > struct hfi_quantization quant; > struct hfi_quantization_range quant_range; > u32 ptype, rate_control, bitrate, profile = 0, level = 0; > + u64 framerate; > int ret; > > ret = venus_helper_set_work_mode(inst, VIDC_WORK_MODE_2); > @@ -664,9 +666,16 @@ static int venc_set_properties(struct venus_inst *inst) > if (ret) > return ret; > > + framerate = inst->timeperframe.denominator * FRAMERATE_FACTOR; > + /* next line is to round up */ > + framerate += inst->timeperframe.numerator - 1; > + do_div(framerate, inst->timeperframe.numerator); > + > ptype = HFI_PROPERTY_CONFIG_FRAME_RATE; > frate.buffer_type = HFI_BUFFER_OUTPUT; > - frate.framerate = inst->fps * (1 << 16); > + frate.framerate = framerate; > + if (frate.framerate > frate_max(inst)) > + frate.framerate = frate_max(inst); > > ret = hfi_session_set_property(inst, ptype, &frate); > if (ret)
