> On Jan 29, 2019, at 18:05, Benjamin Tissoires <benjamin.tissoi...@redhat.com>
> wrote:
>
> On Mon, Jan 21, 2019 at 4:30 AM Kai-Heng Feng
> <kai.heng.f...@canonical.com> wrote:
>>
>>
>>
>>> On Jan 18, 2019, at 23:50, Benjamin Tissoires
>>> <benjamin.tissoi...@redhat.com> wrote:
>>>
>>> Hi Kai-Heng,
>>>
>>> On Mon, Jan 7, 2019 at 8:24 AM Kai-Heng Feng
>>> <kai.heng.f...@canonical.com> wrote:
>>>>
>>>> While using Elan touchpads, the message floods:
>>>> [ 136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete
>>>> report (14/65535)
>>>>
>>>> Though the message flood is annoying, the device it self works without
>>>> any issue. I suspect that the device in question takes too much time to
>>>> pull the IRQ back to high after I2C host has done reading its data.
>>>>
>>>> Since the host receives all useful data, let's ignore the input report
>>>> when there's no data.
>>>>
>>>> Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com>
>>>
>>> Thanks for the v3.
>>>
>>> This patch has just been brought to my attention, and I have one
>>> question before applying it:
>>> are those messages (without your patch) occurring all the time, or
>>> just after resume?
>>
>> All the time.
>>
>> The touchpad works fine though. The entire report is 0xff, so it can be
>> safely ignored.
>
> Couple of things:
> - I have forgotten to tell you that I have applied this patch in
> for-5.1/i2c-hid, it will be pushed to linux-next today.
Thanks!
> - Dell told me that a BIOS fix was solving the issue. We can still
> quarry the patch, but there should not be a strong need for it when
> users upgrade their BIOS.
Multiple platforms are affected by this issue [1], so the patch can still be
really helpful.
[1] https://bugs.launchpad.net/bugs/1784152
Kai-Heng
>
> Cheers,
> Benjamin
>
>>
>>>
>>> I wonder if the pm_suspend delay we talked about in the other thread
>>> would fix that issue in a cleaner way.
>>
>> I’ve replied in another thread, unfortunately it can’t.
>>
>> We can introduce msleep() between each commands though, but I don’t
>> think it’s good either.
>>
>> Kai-Heng
>>
>>>
>>> Cheers,
>>> Benjamin
>>>
>>>> ---
>>>> v3:
>>>> Fix compiler error/warnings.
>>>>
>>>> v2:
>>>> Use dev_warn_once() to warn the user about the situation.
>>>>
>>>> drivers/hid/i2c-hid/i2c-hid-core.c | 9 +++++++++
>>>> 1 file changed, 9 insertions(+)
>>>>
>>>> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c
>>>> b/drivers/hid/i2c-hid/i2c-hid-core.c
>>>> index 8555ce7e737b..2f940c1de616 100644
>>>> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
>>>> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
>>>> @@ -50,6 +50,7 @@
>>>> #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
>>>> #define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
>>>> #define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
>>>> +#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
>>>>
>>>> /* flags */
>>>> #define I2C_HID_STARTED 0
>>>> @@ -179,6 +180,8 @@ static const struct i2c_hid_quirks {
>>>> I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
>>>> { USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001,
>>>> I2C_HID_QUIRK_NO_RUNTIME_PM },
>>>> + { USB_VENDOR_ID_ELAN, HID_ANY_ID,
>>>> + I2C_HID_QUIRK_BOGUS_IRQ },
>>>> { 0, 0 }
>>>> };
>>>>
>>>> @@ -503,6 +506,12 @@ static void i2c_hid_get_input(struct i2c_hid *ihid)
>>>> return;
>>>> }
>>>>
>>>> + if (ihid->quirks & I2C_HID_QUIRK_BOGUS_IRQ && ret_size == 0xffff) {
>>>> + dev_warn_once(&ihid->client->dev, "%s: IRQ triggered but "
>>>> + "there's no data\n", __func__);
>>>> + return;
>>>> + }
>>>> +
>>>> if ((ret_size > size) || (ret_size < 2)) {
>>>> dev_err(&ihid->client->dev, "%s: incomplete report
>>>> (%d/%d)\n",
>>>> __func__, size, ret_size);
>>>> --
>>>> 2.17.1