Dan,
On 1/30/19 10:07 PM, Dan Murphy wrote:
Jacek
On 1/30/19 2:20 PM, Jacek Anaszewski wrote:
Dan,
On 1/30/19 8:59 PM, Dan Murphy wrote:
Jacek
On 1/30/19 1:37 PM, Jacek Anaszewski wrote:
Hi Dan,
Thank you for the RFC.
One vital thing is missing - documentation of brightness file must
be updated to define its semantics for LED multi color class.
Either we need brightness-model file returning only "onoff" option
available, or, for time being, fix the max_brightness for LED multi
color class to 1 (which will map to max intensity level for each color).
I can make max_brightness default to 1 if not set by the LED driver.
But the LP50xx has brightness controls so setting max_brightness from the
driver should over ride
the max of 1 in the upper level.
Yes, so the max_brightness should be updated basing on current
brightness-model. For LEDn_BRIGHTNESS of LP50xx we could have
"hw" or maybe even better just "lp50xx-linear" and "lp50xx-logarithmic"
- I just forgot about that capability of the device.
OK maybe "hw" would make sense as there may be other devices that have
dedicated brightness controls
over color controls.
Single "hw" doesn't address both linear and logarithmic.
This is device specific, so I don't see anything wrong in
"lp50xx-*", provided that it will be documented.
Probably need to create a model for non-modeled cases like "rgb-independent".
Dumb name but I could not
think of anything better.
There is no point in having any rgb* brightness model since increasing
rgb in an arbitrary way will not give the impression of increasing color
intensity (lightness of the same hue). With DT defined hsl-<color>
ranges there is no way to verify that levels arrangement makes sense
with regard to preserving hue, this is a matter of trust. But we should
state that it is highly recommended to obey this constraint so as to
not mislead users.
For devices that do not support brightness as a separate control we can create
a file called
max_brightness_<color> that defines the max that a specific color can be set
to. If max_brightness
is set to 1 then create max_brightness_<color>. If max_brightness > 1 then do
not create the files.
Right. We will need dedicated max_brightness for each color.
They should be placed also in the colors directory, next to the color
files.
OK will document this.
I don't think we have fully vetted the brightness-model yet so I prefer to omit
it and possibly introduce that later.
We need to start from something. It will give better overview of the
whole idea.
OK. Don't get me wrong I don't oppose this idea I am just trying to figure out
how the user space would
know what models and brightness levels are available.
$ cat brightness-model
lp50xx-linear lp50xx-logarithmic onoff hsl-green hsl=blue
max_brightness will return available number of brightness levels
for each brightness model.
I'd not bother with presenting whole range of available color
presets. Userspace can verify the brightness->color mapping
by reading colors/<color> files after setting given brightness
level.
However, I'm not sure how useful it will be. This is a gist
of this whole discussion - we cannot be certain about exact
color effect produced with given settings.
I mean we can read the brightness-models and present the available models but
then how does the user know
what and how many levels are in each model? And how do we govern putting them
in the right order?
`cat max_brightness` will return number of levels for the model
currently set. Regarding the order - we must rely on the DT array
arrangement. In case of hardware originated brightness model we
must trust hardware implementation.
The DT file can get messed up, per the previous example
rgb-green = <0x277c33 0x37b048 0x47e45d>;
This is assumed to be from dimmest to brightest. But that is just an assumption
What if the entry looked like this?
rgb-green = <0x37b048 0x277c33 0x47e45d>;
We can do nothing. It is just the cost of leaving some decisions to DT.
Then echo 1 > brightness is not really a lower intensity then echo 2 >
brightness.
I know this is a product level issue but this can be misused and there is no
way for maintainers
or reviewers to really catch this error in code reviews.
The driver can map the brightness to the appropriate level requested by the
class but again not
sure how the user space can know what is available. And there is nothing from
stopping a
definition of up to 2^32 brightness combinations. This I know is unrealistic
but the capability is there
I am wondering if there should be some sort of coefficient that can be defined
that is
applied to each color (no complex math). I can see this working in a linear
device but logrithimic
maybe an issue.
Like
rgb-green = <0x277c33>; //Coefficient used to set the dimmest allowed
brightness for the color model.
echo 1 > brightness
red = 0x27
green = 0x7c
blue = 0x33
echo 2 > brightness
red = 0x28
green = 0x7d
blue = 0x34
echo 3 > brightness
red = 0x29
green = 0x7e
blue = 0x35
This example would give you 132 different brightness levels. green is the
brightest defined color so the step calculation is
255-124+1 = 132 (zero based) as 0 is off.
There can be a file called rgb_green_max which can be read to indicate how many
brightness levels can be achieved.
If the user goes beyond the steps then throw -EINVAL at them.
These brightness models probably should be put into a separate directory to
isolate and not clutter the colors directory.
And writing brightness to these models would be immediate no sync involved.
I intended that brightness-model location would be the main LED class
device directory.
And the whole concept is simple. We allow to set what we get from DT
or from the hardware. Without verification exceeding beyond
max_brightness values defined per iout.
--
Best regards,
Jacek Anaszewski