Am Donnerstag, den 31.01.2019, 08:03 +0000 schrieb Aisheng Dong: > One irqsteer channel can support up to 8 output interrupts. > > > Cc: Marc Zyngier <[email protected]> > > Cc: Rob Herring <[email protected]> > > Cc: Lucas Stach <[email protected]> > > Cc: Shawn Guo <[email protected]> > Cc: [email protected] > Signed-off-by: Dong Aisheng <[email protected]>
Reviewed-by: Lucas Stach <[email protected]> > --- > ChangeLog: > v2->v3: > * fix a typo > v1->v2: > * remove one unnecessary note. > --- > .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt | 5 > +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git > a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt > b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt > index 6d0a41b..582991c 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt > +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt > @@ -6,8 +6,9 @@ Required properties: > > - "fsl,imx8m-irqsteer" > > - "fsl,imx-irqsteer" > - reg: Physical base address and size of registers. > -- interrupts: Should contain the parent interrupt line used to multiplex the > - input interrupts. > +- interrupts: Should contain the up to 8 parent interrupt lines used to > + multiplex the input interrupts. They should be specified sequentially > + from output 0 to 7. > - clocks: Should contain one clock for entry in clock-names > see Documentation/devicetree/bindings/clock/clock-bindings.txt > - clock-names:
