Hi Jan,
On 1/24/2019 7:52 AM, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kis...@siemens.com>
>
> Somewhere along recent changes to power control of the wl1835, power-on
> became very unreliable on the hikey, failing like this:
>
> wl1271_sdio: probe of mmc2:0001:1 failed with error -16
> wl1271_sdio: probe of mmc2:0001:2 failed with error -16
>
> After playing with some dt parameters and comparing to other users of
> this chip, it turned out we need some power-on delay to make things
> stable again. In contrast to those other users which define 200 ms, the
> hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
> like on the Ultra96.
>
> Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
> Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
> Acked-by: Ulf Hansson <ulf.hans...@linaro.org>
Applied to the hisilicon soc dt tree.
Thanks!
Best Regards,
Wei
> ---
>
> Changes in v2:
> - set delay to 10 ms
> - updated changelog
>
> Who will take care of updating also the Hikey firmware dts with this
> change?
>
> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index 610235028cc7..ba946543dd0a 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -118,6 +118,7 @@
> reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
> clocks = <&pmic>;
> clock-names = "ext_clock";
> + post-power-on-delay-ms = <10>;
> power-off-delay-us = <10>;
> };
>
> --
> 2.16.4
>
> .
>
