Hello, Alan! Thank you for applying my patch to test13pre3-ac3! However, there is a glaring bug in drivers/sound/Config.in - CONFIG_SOUND_YMFPCI is declared twice - once outside CONFIG_OSS, then inside CONFIG_OSS. I'm removing the later declaration. CONFIG_SOUND_YMPCI should be disabled if the native driver is compiled into the kernel. I'm fixing it as well. Also I tried ymf_sb.c without SUPPORT_UART401_MIDI defined (you have to edit ymf_sb.c to undefine it). I noticed that the "soundcore" module would remain in memory with usage count 1 after inserting and removing "ymf_sb". It appears that ymf_sb.c should never call sb_dsp_unload with the second argument being 1 (unload_mpu). It's a 1-byte fix. I decided not to change the signature of ymf7xxsb_unload_sb for now. The patch is also available here: http://www.red-bean.com/~proski/ymf/ymf_sb.patch P.S. The patch has been tested. My system is running test13pre3-ac3 and playing nice music :-) Regards, Pavel Roskin ________________________ --- linux.orig/drivers/sound/Config.in +++ linux/drivers/sound/Config.in @@ -145,9 +145,8 @@ dep_tristate ' Yamaha FM synthesizer (YM3812/OPL-3) support' CONFIG_SOUND_YM3812 $CONFIG_SOUND_OSS dep_tristate ' Yamaha OPL3-SA1 audio controller' CONFIG_SOUND_OPL3SA1 $CONFIG_SOUND_OSS dep_tristate ' Yamaha OPL3-SA2, SA3, and SAx based PnP cards' CONFIG_SOUND_OPL3SA2 $CONFIG_SOUND_OSS - dep_tristate ' Yamaha YMF7xx PCI audio (legacy mode)' CONFIG_SOUND_YMPCI $CONFIG_SOUND_OSS $CONFIG_PCI - if [ "$CONFIG_SOUND_YMPCI" = "n" ]; then - dep_tristate ' Yamaha YMF7xx PCI audio (native mode) (EXPERIMENTAL)' CONFIG_SOUND_YMFPCI $CONFIG_SOUND_OSS $CONFIG_PCI $CONFIG_EXPERIMENTAL + if [ "$CONFIG_SOUND_YMFPCI" != "y" ]; then + dep_tristate ' Yamaha YMF7xx PCI audio (legacy mode)' CONFIG_SOUND_YMPCI +$CONFIG_SOUND_OSS $CONFIG_PCI fi dep_tristate ' 6850 UART support' CONFIG_SOUND_UART6850 $CONFIG_SOUND_OSS --- linux.orig/drivers/sound/ymf_sb.c +++ linux/drivers/sound/ymf_sb.c @@ -836,7 +836,7 @@ ymf7xxsb_unload_sb (&sb_data[i], 0); ymf7xxsb_unload_midi (&mpu_data[i]); #else - ymf7xxsb_unload_sb (&sb_data[i], 1); + ymf7xxsb_unload_sb (&sb_data[i], 0); #endif } ________________________ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
