Header rohm-bd718x7.h was split to generic and component specific parts. This changed the struct bd718x7. Adapt the regulator driver to these changes.
Signed-off-by: Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com> Acked-by: Mark Brown <broo...@kernel.org> --- drivers/regulator/bd718x7-regulator.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index ccea133778c8..9109920b4a06 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -1018,11 +1018,11 @@ static int bd718xx_probe(struct platform_device *pdev) struct bd718xx *mfd; struct regulator_config config = { 0 }; struct bd718xx_pmic_inits pmic_regulators[] = { - [BD718XX_TYPE_BD71837] = { + [ROHM_CHIP_TYPE_BD71837] = { .r_datas = bd71837_regulators, .r_amount = ARRAY_SIZE(bd71837_regulators), }, - [BD718XX_TYPE_BD71847] = { + [ROHM_CHIP_TYPE_BD71847] = { .r_datas = bd71847_regulators, .r_amount = ARRAY_SIZE(bd71847_regulators), }, @@ -1037,15 +1037,15 @@ static int bd718xx_probe(struct platform_device *pdev) goto err; } - if (mfd->chip_type >= BD718XX_TYPE_AMOUNT || - !pmic_regulators[mfd->chip_type].r_datas) { + if (mfd->chip.chip_type >= ROHM_CHIP_TYPE_AMOUNT || + !pmic_regulators[mfd->chip.chip_type].r_datas) { dev_err(&pdev->dev, "Unsupported chip type\n"); err = -EINVAL; goto err; } /* Register LOCK release */ - err = regmap_update_bits(mfd->regmap, BD718XX_REG_REGLOCK, + err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_REGLOCK, (REGLOCK_PWRSEQ | REGLOCK_VREG), 0); if (err) { dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err); @@ -1065,7 +1065,7 @@ static int bd718xx_probe(struct platform_device *pdev) * for all reset types because OTP loading at READY will clear SEL * bit allowing HW defaults for power rails to be used */ - err = regmap_update_bits(mfd->regmap, BD718XX_REG_TRANS_COND1, + err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_TRANS_COND1, BD718XX_ON_REQ_POWEROFF_MASK | BD718XX_SWRESET_POWEROFF_MASK | BD718XX_WDOG_POWEROFF_MASK | @@ -1078,17 +1078,17 @@ static int bd718xx_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "Changed all resets from SVNS to READY\n"); } - for (i = 0; i < pmic_regulators[mfd->chip_type].r_amount; i++) { + for (i = 0; i < pmic_regulators[mfd->chip.chip_type].r_amount; i++) { const struct regulator_desc *desc; struct regulator_dev *rdev; const struct bd718xx_regulator_data *r; - r = &pmic_regulators[mfd->chip_type].r_datas[i]; + r = &pmic_regulators[mfd->chip.chip_type].r_datas[i]; desc = &r->desc; config.dev = pdev->dev.parent; - config.regmap = mfd->regmap; + config.regmap = mfd->chip.regmap; rdev = devm_regulator_register(&pdev->dev, desc, &config); if (IS_ERR(rdev)) { @@ -1104,7 +1104,7 @@ static int bd718xx_probe(struct platform_device *pdev) * can now switch the control from PMIC state machine to the * register interface */ - err = regmap_update_bits(mfd->regmap, r->init.reg, + err = regmap_update_bits(mfd->chip.regmap, r->init.reg, r->init.mask, r->init.val); if (err) { dev_err(&pdev->dev, @@ -1113,7 +1113,7 @@ static int bd718xx_probe(struct platform_device *pdev) goto err; } for (j = 0; j < r->additional_init_amnt; j++) { - err = regmap_update_bits(mfd->regmap, + err = regmap_update_bits(mfd->chip.regmap, r->additional_inits[j].reg, r->additional_inits[j].mask, r->additional_inits[j].val); -- 2.14.3 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then, he vanished ~~~