Hi Marc,
On 04/02/19 11:12 PM, Marc Gonzalez wrote:
> This reverts commit 60f0187031c05e04cbadffb62f557d0ff3564490.
>
> Calling ufshcd_set_vccq_rail_unused hangs my system.
> It seems vccq is not *not* needed.
>
> Signed-off-by: Marc Gonzalez <marc.w.gonza...@free.fr>
> ---
AFAIK Samsung and Toshiba UFS devices does not use VCCQ (this pin is
either floating or connected to Ground, at least on the devices that I
have worked on).
You said your system hanged, I believe you have set UFS_DEVICE_NO_VCCQ
quirks, in that case VCCQ regulator should having been disabled.
So you mean your system hanged because vccq regulator got disabled?
> drivers/scsi/ufs/ufs.h | 1 -
> drivers/scsi/ufs/ufshcd.c | 59 +++------------------------------------
> 2 files changed, 4 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index dd65fea07687..7da7318eb6a6 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -514,7 +514,6 @@ struct ufs_vreg {
> struct regulator *reg;
> const char *name;
> bool enabled;
> - bool unused;
> int min_uV;
> int max_uV;
> int min_uA;
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 9ba7671b84f8..8b9a01073d62 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -245,7 +245,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba);
> static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
> bool skip_ref_clk);
> static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
> -static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused);
> static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
> static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
> static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
> @@ -6819,11 +6818,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
> ufs_fixup_device_setup(hba, &card);
> ufshcd_tune_unipro_params(hba);
>
> - ret = ufshcd_set_vccq_rail_unused(hba,
> - (hba->dev_quirks & UFS_DEVICE_NO_VCCQ) ? true : false);
> - if (ret)
> - goto out;
> -
> /* UFS device is also active now */
> ufshcd_set_ufs_dev_active(hba);
> ufshcd_force_reset_auto_bkops(hba);
> @@ -7007,24 +7001,13 @@ static int ufshcd_config_vreg_load(struct device
> *dev, struct ufs_vreg *vreg,
> static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba,
> struct ufs_vreg *vreg)
> {
> - if (!vreg)
> - return 0;
> - else if (vreg->unused)
> - return 0;
> - else
> - return ufshcd_config_vreg_load(hba->dev, vreg,
> - UFS_VREG_LPM_LOAD_UA);
> + return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA);
> }
>
> static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
> struct ufs_vreg *vreg)
> {
> - if (!vreg)
> - return 0;
> - else if (vreg->unused)
> - return 0;
> - else
> - return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
> + return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
> }
>
> static int ufshcd_config_vreg(struct device *dev,
> @@ -7062,9 +7045,7 @@ static int ufshcd_enable_vreg(struct device *dev,
> struct ufs_vreg *vreg)
> {
> int ret = 0;
>
> - if (!vreg)
> - goto out;
> - else if (vreg->enabled || vreg->unused)
> + if (!vreg || vreg->enabled)
> goto out;
>
> ret = ufshcd_config_vreg(dev, vreg, true);
> @@ -7084,9 +7065,7 @@ static int ufshcd_disable_vreg(struct device *dev,
> struct ufs_vreg *vreg)
> {
> int ret = 0;
>
> - if (!vreg)
> - goto out;
> - else if (!vreg->enabled || vreg->unused)
> + if (!vreg || !vreg->enabled)
> goto out;
>
> ret = regulator_disable(vreg->reg);
> @@ -7192,36 +7171,6 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
> return 0;
> }
>
> -static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused)
> -{
> - int ret = 0;
> - struct ufs_vreg_info *info = &hba->vreg_info;
> -
> - if (!info)
> - goto out;
> - else if (!info->vccq)
> - goto out;
> -
> - if (unused) {
> - /* shut off the rail here */
> - ret = ufshcd_toggle_vreg(hba->dev, info->vccq, false);
> - /*
> - * Mark this rail as no longer used, so it doesn't get enabled
> - * later by mistake
> - */
> - if (!ret)
> - info->vccq->unused = true;
> - } else {
> - /*
> - * rail should have been already enabled hence just make sure
> - * that unused flag is cleared.
> - */
> - info->vccq->unused = false;
> - }
> -out:
> - return ret;
> -}
> -
> static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
> bool skip_ref_clk)
> {
>
