On Thu, Jan 31, 2019 at 05:18:04PM +0100, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.bez...@microchip.com>
>
> SAM9X60 uses high and low drive strengths. To implement this, in
> at91_pinctrl_mux_ops::set_drivestrength and
> at91_pinctrl_mux_ops::get_drivestrength we need bit numbers of
> drive strengths (1 for low, 2 for high), thus change the code to
> allow the usage of drive strength bit numbers.
>
> Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
> ---
> drivers/pinctrl/pinctrl-at91.c | 32 ++++++++++++++++++++------------
> 1 file changed, 20 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index 3d49bbbcdbc7..31f06dafca2e 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -72,10 +72,15 @@ static int gpio_banks;
> * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive
> * strength when there is no dt config for it.
> */
> -#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT)
> -#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT)
> -#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT)
> -#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT)
> +enum drive_strength_bit {
> + DRIVE_STRENGTH_BIT_DEF,
> + DRIVE_STRENGTH_BIT_LOW,
> + DRIVE_STRENGTH_BIT_MED,
> + DRIVE_STRENGTH_BIT_HI,
> +};
> +
> +#define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \
> + DRIVE_STRENGTH_SHIFT)
>
> /**
> * struct at91_pmx_func - describes AT91 pinmux functions
> @@ -551,7 +556,7 @@ static unsigned at91_mux_sama5d3_get_drivestrength(void
> __iomem *pio,
> /* SAMA5 strength is 1:1 with our defines,
> * except 0 is equivalent to low per datasheet */
> if (!tmp)
> - tmp = DRIVE_STRENGTH_LOW;
> + tmp = DRIVE_STRENGTH_BIT_MSK(LOW);
>
> return tmp;
> }
> @@ -564,7 +569,7 @@ static unsigned at91_mux_sam9x5_get_drivestrength(void
> __iomem *pio,
>
> /* strength is inverse in SAM9x5s hardware with the pinctrl defines
> * hardware: 0 = hi, 1 = med, 2 = low, 3 = rsvd */
> - tmp = DRIVE_STRENGTH_HI - tmp;
> + tmp = DRIVE_STRENGTH_BIT_MSK(HI) - tmp;
>
> return tmp;
> }
> @@ -600,7 +605,7 @@ static void at91_mux_sam9x5_set_drivestrength(void
> __iomem *pio, unsigned pin,
>
> /* strength is inverse on SAM9x5s with our defines
> * 0 = hi, 1 = med, 2 = low, 3 = rsvd */
> - setting = DRIVE_STRENGTH_HI - setting;
> + setting = DRIVE_STRENGTH_BIT_MSK(HI) - setting;
>
> set_drive_strength(pio + at91sam9x5_get_drive_register(pin), pin,
> setting);
> @@ -959,11 +964,11 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
> } \
> } while (0)
>
> -#define DBG_SHOW_FLAG_MASKED(mask,flag) do { \
> +#define DBG_SHOW_FLAG_MASKED(mask,flag,name) do { \
checkpatch error: space required
> if ((config & mask) == flag) { \
> if (num_conf) \
> seq_puts(s, "|"); \
> - seq_puts(s, #flag); \
> + seq_puts(s, #name); \
> num_conf++; \
> } \
> } while (0)
> @@ -981,9 +986,12 @@ static void at91_pinconf_dbg_show(struct pinctrl_dev
> *pctldev,
> DBG_SHOW_FLAG(PULL_DOWN);
> DBG_SHOW_FLAG(DIS_SCHMIT);
> DBG_SHOW_FLAG(DEGLITCH);
> - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_LOW);
> - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_MED);
> - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_HI);
> + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(LOW),
> + DRIVE_STRENGTH_LOW);
> + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(MED),
> + DRIVE_STRENGTH_MED);
> + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(HI),
> + DRIVE_STRENGTH_HI);
> DBG_SHOW_FLAG(DEBOUNCE);
> if (config & DEBOUNCE) {
> val = config >> DEBOUNCE_VAL_SHIFT;
> --
> 2.7.4
>
