Hi, after upgrading from 2.6.21 to 2.6.22 the CPU temperatures shown by w83781d look unreal. They were in a range from 40°C when idle to 75°C under full load with 2.6.21. The values shown now are in a very small range from 77°C to 82°C. From the (low) noise of the fan I can tell that the temperature is <50°C. The third temperature shown is completely wrong.
I have a Tyan Tiger MPX board with a w83782d chip. Output from "sensors": w83782d-i2c-0-2d Adapter: SMBus AMD768 adapter at 80e0 +5 V: +4.81 V (min = +4.76 V, max = +5.24 V) 3 VSB: +3.30 V (min = +2.85 V, max = +3.15 V) ALARM chs3 Fan: 2122 RPM (min = 2657 RPM, div = 4) ALARM VRM2 Temp: -208°C (high = -176°C, hyst = -181°C) sensor = transistor CPU1 Temp: +78.5°C (high = +80°C, hyst = +75°C) sensor = transistor ALARM CPU2 Temp: +77.5°C (high = +80°C, hyst = +75°C) sensor = transistor ALARM alarms: beep_enable: Sound alarm enabled # cat /sys/bus/i2c/devices/0-002d/temp*_input -209000 77500 77500 Any ideas? -jo -- -rw-r--r-- 1 jo users 62 2007-08-04 14:02 /home/jo/.signature - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/