On 31/01/2019 08:03, Aisheng Dong wrote:
> One irqsteer channel can support up to 8 output interrupts.
>
> Cc: Marc Zyngier <marc.zyng...@arm.com>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Lucas Stach <l.st...@pengutronix.de>
> Cc: Shawn Guo <shawn...@kernel.org>
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Dong Aisheng <aisheng.d...@nxp.com>
> ---
> ChangeLog:
> v2->v3:
> * fix a typo
> v1->v2:
> * remove one unnecessary note.
> ---
> .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt | 5
> +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git
> a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> index 6d0a41b..582991c 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> @@ -6,8 +6,9 @@ Required properties:
> - "fsl,imx8m-irqsteer"
> - "fsl,imx-irqsteer"
> - reg: Physical base address and size of registers.
> -- interrupts: Should contain the parent interrupt line used to multiplex the
> - input interrupts.
> +- interrupts: Should contain the up to 8 parent interrupt lines used to
> + multiplex the input interrupts. They should be specified sequentially
> + from output 0 to 7.
> - clocks: Should contain one clock for entry in clock-names
> see Documentation/devicetree/bindings/clock/clock-bindings.txt
> - clock-names:
>
I'd like an Ack from a DT person, as this is a change to an existing
binding.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
