On 31/01/2019 08:03, Aisheng Dong wrote:
> Not all 64 interrupts may be used in one group. e.g. most irqsteer in
> imx8qxp and imx8qm subsystems supports only 32 interrupts.
> 
> As the IP integration parameters are Channel number and interrupts number,
> let's use fsl,irqs-num to represents how many interrupts supported
> by this irqsteer channel.
> 
> Cc: Marc Zyngier <marc.zyng...@arm.com>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Shawn Guo <shawn...@kernel.org>
> Cc: devicet...@vger.kernel.org
> Reviewed-by: Lucas Stach <l.st...@pengutronix.de>
> Signed-off-by: Dong Aisheng <aisheng.d...@nxp.com>
> ---
> ChangeLog:
>  v1->v2:
>   * change property name fsl,irqs-per-chan to fsl,num-irqs.
> ---
>  .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt       | 6 
> +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git 
> a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt 
> b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> index 45790ce..6d0a41b 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> @@ -16,8 +16,8 @@ Required properties:
>  - #interrupt-cells: Specifies the number of cells needed to encode an
>    interrupt source. The value must be 1.
>  - fsl,channel: The output channel that all input IRQs should be steered into.
> -- fsl,irq-groups: Number of IRQ groups managed by this controller instance.
> -  Each group manages 64 input interrupts.
> +- fsl,num-irqs: Number of input interrupts of this channel.
> +  Should be multiple of 32 input interrupts and up to 512 interrupts.
>  
>  Example:
>  
> @@ -28,7 +28,7 @@ Example:
>               clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
>               clock-names = "ipg";
>               fsl,channel = <0>;
> -             fsl,irq-groups = <1>;
> +             fsl,num-irqs = <64>;
>               interrupt-controller;
>               #interrupt-cells = <1>;
>       };
> 

This is a change to an existing binding, so I'd need the Ack from a DT
maintainer before I can queue this.

Thanks,

        M.
-- 
Jazz is not dead. It just smells funny...

Reply via email to