On Mon, Feb 11, 2019 at 05:27:37PM +0000, Marc Zyngier wrote:
> On 11/02/2019 17:14, Alexander Syring wrote:
> > According to U-Boot dts file enabling the SPI-NOR flash for use in
> > Linux
> > 
> > Signed-off-by: Alexander Syring <[email protected]>
> > ---
> >  .../boot/dts/marvell/armada-8040-mcbin.dtsi   | 23 +++++++++++++++----
> >  1 file changed, 18 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi 
> > b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> > index 329f8ceeebea..83994ff46e2d 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> > +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> > @@ -333,11 +333,24 @@
> >     status = "okay";
> >  
> >     spi-flash@0 {
> > -           compatible = "st,w25q32";
> > -           spi-max-frequency = <50000000>;
> > -           reg = <0>;
> > -   };
> > -};
> > +           compatible = "st,w25q32", "jedec,spi-nor";
> > +           reg = <0>;
> > +           spi-max-frequency = <50000000>;
> > +
> > +           partitions {
> > +                   compatible = "fixed-partitions";
> > +
> > +                   partition@0 {
> > +                           label = "U-Boot";
> > +                           reg = <0 0x200000>;
> > +                   };
> > +                   partition@400000 {
> > +                           label = "U-Boot Env";
> > +                           reg = <0x200000 0xce0000>;
> > +                   };
> > +           };
> > +   };
> > +};
> >  
> >  &cp1_usb3_0 {
> >     /* CPS Lane 2 - CON7 */
> > 
> 
> Really?
> 
> My mcbin SPI flash doesn't have this partitioning, and doesn't have
> u-boot at all. This should be provided by the bootloader itself, and not
> baked into the reference DT.

Exactly.

Simple solution for the above.  Instead of the above, create
/etc/fw_env.config with:

/dev/mtdblock0 0x200000 0x10000

Then its possible to read and write the u-boot environment using
fw_printenv and fw_setenv.  No partitions are required, and IMHO
are pointless for such a scenario.

That will allow those of us with a different SPI flash layout and
already have this in /etc/fw_env.config:

/dev/mtdblock0 0x3f0000 0x10000

to not experience any breakage.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

Reply via email to