On 11/02/19 3:23 PM, Thomas Petazzoni wrote: > Even though SDHCI controllers may have a dedicated WP pin that can be > queried using the SDHCI_PRESENT_STATE register, some platforms may > chose to use a separate regular GPIO to route the WP signal. Such a > GPIO is typically represented using the wp-gpios property in the > Device Tree. > > Unfortunately, the current sdhci_check_ro() function does not make use > of such GPIO when available: it either uses a host controller specific > ->get_ro() operation, or uses the SDHCI_PRESENT_STATE. Several host > controller specific ->get_ro() functions are implemented just to check > a WP GPIO state. > > Instead of pushing this to more controller-specific implementations, > let's handle this in the core SDHCI code, just like it is already done > for the CD GPIO in sdhci_get_cd(). > > The below patch simply changes sdhci_check_ro() to use the value of > the WP GPIO if available. We need to adjust the prototype of the > function to use a mmc_host* as argument instead of sdhci_host*, since > the mmc_can_gpio_ro() and mmc_gpio_get_ro() helpers take a mmc_host*. > > Signed-off-by: Thomas Petazzoni <thomas.petazz...@bootlin.com> > --- > Changes since v1: > > - As suggested by Adrian Hunter, call the ->get_ro() if it exists > before falling back to using mmc_gpio_get_ro(). Indeed, if the > controller-specific code has implemented a ->get_ro() callback, it > should take precedence over what the SDHCI core does. > > Due to this change, I have not added Thierry Redding Reviewed-by. > > - Fix typo in the commit log noticed by Thierry Redding. > --- > drivers/mmc/host/sdhci.c | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index df05352b6a4a..e6682ea5f7c0 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -2022,8 +2022,9 @@ static int sdhci_get_cd(struct mmc_host *mmc) > return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); > } > > -static int sdhci_check_ro(struct sdhci_host *host) > +static int sdhci_check_ro(struct mmc_host *mmc)
Please let's not change the parameter. > { > + struct sdhci_host *host = mmc_priv(mmc); > unsigned long flags; > int is_readonly; > > @@ -2033,6 +2034,8 @@ static int sdhci_check_ro(struct sdhci_host *host) > is_readonly = 0; > else if (host->ops->get_ro) > is_readonly = host->ops->get_ro(host); > + else if (mmc_can_gpio_ro(mmc)) > + is_readonly = mmc_gpio_get_ro(mmc); Just make it 'host->mmc' instead of 'mmc' > else > is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE) > & SDHCI_WRITE_PROTECT); > @@ -2052,11 +2055,11 @@ static int sdhci_get_ro(struct mmc_host *mmc) > int i, ro_count; > > if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT)) > - return sdhci_check_ro(host); > + return sdhci_check_ro(mmc); > > ro_count = 0; > for (i = 0; i < SAMPLE_COUNT; i++) { > - if (sdhci_check_ro(host)) { > + if (sdhci_check_ro(mmc)) { > if (++ro_count > SAMPLE_COUNT / 2) > return 1; > } >