Need syscfg clock for MCU family in case bootloader does not
activate it.
Signed-off-by: Christophe Roullier <christophe.roull...@st.com>
---
Documentation/devicetree/bindings/net/stm32-dwmac.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index f42dc68..524f8a0 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -14,8 +14,8 @@ Required properties:
- clock-names: Should be "stmmaceth" for the host clock.
Should be "mac-clk-tx" for the MAC TX clock.
Should be "mac-clk-rx" for the MAC RX clock.
- For MPU family need to add also "ethstp" for power mode clock
and,
- "syscfg-clk" for SYSCFG clock.
+ Should be "syscfg-clk" for the SYSCFG clock.
+ For MPU family need to add also "ethstp" for power mode clock
- interrupt-names: Should contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
Should be "macirq" for the main MAC IRQ
--
2.7.4
