On 13.2.2019 23.13, Ivan Mironov wrote:
Hi all,
There is a known problem on some MacBooks: internal card reader
disappears after the first suspend/resume and all subsequent attempts
to suspend laptop are failing.
This was reported[1][2] and even discussed in the mailing lists[3],
without any real solution. After trying various things[4], including
some existing quirks, I discovered that switching link state to DISABLED
before suspend both fixes the card reader device and allows any subsequent
suspend to succeed.
First patch adds code for this new quirk, and second patch enables this
quirk for card reader device which is used in my macbook.
I'm not really familiar with either USB standards or kernel code to
support them, so this patch series is RFC. I'm especially unsure with the
"resume" part, because I implemented it by trial and error mostly.
However, I'm using kernel with these patches and it works for me.
Also, feel free to suggest other kernel patches or existing quirks or
quirk combinations to fix the same problem.
Oh, and by the way: I've checked schematics of various macbooks available
on the internet. It seems that the actual chip is Genesys Logic GL3219,
probably just with the custom ID. What I found curious, is that USB 2.0
pins of this chip (D+ and D-) are not really connected anywhere, but
instead shorted through the resistor. Could it be possible that this
somehow messes up some logic inside the device, host controller or
linux kernel?
This card reader prevents second system suspend on latest kernels, see thread:
https://marc.info/?l=linux-usb&m=154816680816246&w=2
In that case the card reader fails to resume from usb3 U3 suspend state,
and ends up stuck in USB3 polling state, which now prevents suspend
Could you try a testpatch (attached) to see if it helps?
Thanks
-Mathias
>From 6b3b9f3d41b8ac9cf993bf4b88a20e30c99e3b7f Mon Sep 17 00:00:00 2001
From: Mathias Nyman <mathias.ny...@linux.intel.com>
Date: Thu, 14 Feb 2019 15:40:12 +0200
Subject: [PATCH] usb: warm reset USB3 ports stuck in polling
warm reset USB3 ports stuck in polling after 360ms.
In the polling state USB3 ports are link training, which should
not take longer than 360ms according to USB3 specification
tPollingLFPSTimeout value.
The card reader connected to xhci in MacBookPro is found stuck
in this state after resuming from suspend.
Signed-off-by: Mathias Nyman <mathias.ny...@linux.intel.com>
---
drivers/usb/core/hub.c | 36 +++++++++++++++++++++++++++++++++---
1 file changed, 33 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8d4631c..448884d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1151,9 +1151,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
*/
if (hub_is_superspeed(hdev) &&
((portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_POLLING))
+ USB_SS_PORT_LS_POLLING)) {
need_debounce_delay = true;
-
+ set_bit(port1, hub->event_bits);
+ }
/* Clear status-change flags; we'll debounce later */
if (portchange & USB_PORT_STAT_C_CONNECTION) {
need_debounce_delay = true;
@@ -2697,6 +2698,9 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
#define HUB_LONG_RESET_TIME 200
#define HUB_RESET_TIMEOUT 800
+#define HUB_LFPS_TIME 24
+#define HUB_LFPS_TIMEOUT 360
+
/*
* "New scheme" enumeration causes an extra state transition to be
* exposed to an xhci host and causes USB3 devices to receive control
@@ -2737,6 +2741,31 @@ static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
|| link_state == USB_SS_PORT_LS_COMP_MOD;
}
+static bool hub_port_stuck_in_polling(struct usb_hub *hub, int port1,
+ u16 portstatus)
+{
+ u16 link_state;
+ u16 portchange;
+ int lfps_delay = 0;
+
+ if (!hub_is_superspeed(hub->hdev))
+ return false;
+
+ link_state = portstatus & USB_PORT_STAT_LINK_STATE;
+
+ while (link_state == USB_SS_PORT_LS_POLLING) {
+ msleep(HUB_LFPS_TIME);
+
+ hub_port_status(hub, port1, &portstatus, &portchange);
+ link_state = portstatus & USB_PORT_STAT_LINK_STATE;
+
+ lfps_delay += HUB_LFPS_TIME;
+ if (lfps_delay > HUB_LFPS_TIMEOUT)
+ return true;
+ }
+ return false;
+}
+
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm)
{
@@ -5329,7 +5358,8 @@ static void port_event(struct usb_hub *hub, int port1)
* Warm reset a USB3 protocol port if it's in
* SS.Inactive state.
*/
- if (hub_port_warm_reset_required(hub, port1, portstatus)) {
+ if (hub_port_warm_reset_required(hub, port1, portstatus) ||
+ hub_port_stuck_in_polling(hub, port1, portstatus)) {
dev_dbg(&port_dev->dev, "do warm reset\n");
if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION)
|| udev->state == USB_STATE_NOTATTACHED) {
--
2.7.4
