Hi Balakrishna, On Wed, Feb 20, 2019 at 04:55:16PM +0530, Balakrishna Godavarthi wrote: > This patch will update the baudrate change request wait time from > 300 ms to 100 ms. When host sends the change baudrate request to > the controller, controller sets its clock and wait until the > clocks settle down. Here the Wait time is required for both > host and controller to be on sync. > > Signed-off-by: Balakrishna Godavarthi <bgoda...@codeaurora.org> > --- > drivers/bluetooth/hci_qca.c | 12 ++++++++++-- > 1 file changed, 10 insertions(+), 2 deletions(-) > > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c > index 5e03504c4e0c..22f3c983f868 100644 > --- a/drivers/bluetooth/hci_qca.c > +++ b/drivers/bluetooth/hci_qca.c > @@ -59,7 +59,8 @@ > > #define IBS_WAKE_RETRANS_TIMEOUT_MS 100 > #define IBS_TX_IDLE_TIMEOUT_MS 2000 > -#define BAUDRATE_SETTLE_TIMEOUT_MS 300 > +#define ROME_BD_SETTLE_TIMEOUT_MS 300 > +#define WCN3990_BD_SETTLE_TIMEOUT_MS 100
nit: _BR_ instead of _BD_? > #define POWER_PULSE_TRANS_TIMEOUT_MS 100 > > /* susclk rate */ > @@ -965,8 +966,11 @@ static int qca_set_baudrate(struct hci_dev *hdev, > uint8_t baudrate) > struct hci_uart *hu = hci_get_drvdata(hdev); > struct qca_data *qca = hu->priv; > struct sk_buff *skb; > + struct qca_serdev *qcadev; > + unsigned int bd_settling_timeout; nit: from the context the purpose of the variable is fairly clear, calling it just 'timeout' (or 'settling_time', it's not really a timeout) should be fine. That said, I have a similar change in my pipeline, which further reduces the time to the 'strictly necessary'. It's slightly more code though. I guess I'll send it and we can discuss/let Marcel decide what to adopt. Cheers Matthias