Add i.MX8QXP CPU thermal zone support.
Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
Changes since V7:
- move the "imx,sensor-resource-id" to scu tsens node;
- correct #thermal-sensor-cells value to be 0 as there is ONLY one
thermal zone now;
- add cooling map for passive mode.
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 35 ++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 4c3dd95..eccdf28 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -34,6 +35,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
+ #cooling-cells = <2>;
};
A35_1: cpu@1 {
@@ -116,6 +118,12 @@
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+
+ tsens: thermal-sensor {
+ compatible = "fsl,imx8qxp-sc-thermal",
"fsl,imx-sc-thermal";
+ #thermal-sensor-cells = <0>;
+ imx,sensor-resource-id = <IMX_SC_R_SYSTEM>;
+ };
};
timer {
@@ -443,4 +451,31 @@
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
};
+
+ thermal_zones: thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tsens 0>;
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip1 {
+ temperature = <127000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A35_0 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
--
2.7.4
