This series adds the missing bits necessary to fully support 2.5GBaseT in the Marvell Alaska PHYs.
The main points for that support are : - Making use of the .get_features call, recently introduced by Heiner and Andrew, that allows having a fully populated list of supported modes, including 2500BaseT. - Configuring the MII to 2500BaseX when establishing a link at 2.5G - Adding a small quirk to take into account the fact that some PHYs in the family won't report the correct supported abilities The rest of the series consists of small cosmetic improvements such as using the correct helper to set a linkmode bit and adding macros for the PHY ids. We also add support for the 88E2110 PHY, which doesn't require the quirk, and support for 2500BaseT in the PPv2 driver, in order to have a fully working setup on the MacchiatoBin board. Maxime Chevallier (7): net: phy: marvell10g: Use get_features to get the PHY abilities net: phy: marvell10g: Use linkmode_set_bit helper instead of __set_bit net: phy: marvell10g: Use 2500BASEX when using 2.5GBASET net: phy: marvell10g: Use a #define for 88X3310 family id net: phy: marvell10g: Force reading of 2.5/5G net: mvpp2: Add 2.5GBaseT support net: phy: marvell10g: add support for the 88x2110 PHY .../net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 + drivers/net/phy/marvell10g.c | 92 ++++++++++++++++--- include/linux/marvell_phy.h | 2 + 3 files changed, 81 insertions(+), 14 deletions(-) -- 2.19.2
