On Mon, Feb 18, 2019 at 10:04:02PM -0800, Bjorn Andersson wrote:
> The Qualcomm PCIe2 PHY is a Synopsys based PCIe PHY found in a number of
> Qualcomm platforms, add a binding to describe this.
>
> Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org>
> ---
> .../bindings/phy/qcom-pcie2-phy.txt | 40 +++++++++++++++++++
> 1 file changed, 40 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt
> b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt
> new file mode 100644
> index 000000000000..7da02f9d78c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt
> @@ -0,0 +1,40 @@
> +Qualcomm PCIe2 PHY controller
> +=============================
> +
> +The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm
> +platforms.
> +
> +Required properties:
> + - compatible: compatible list, should be:
> + "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"
> +
> + - reg: offset and length of the PHY register set.
> + - #phy-cells: must be 0.
> +
> + - clocks: a clock-specifier pair for the "pipe" clock
> +
> + - vdda-vp-supply: phandle to low voltage regulator
> + - vdda-vph-supply: phandle to high voltage regulator
> +
> + - resets: reset-specifier pairs for the "phy" and "pipe" resets
> + - reset-names: list of resets, should contain:
> + "phy" and "pipe"
> +
> + - clock-output-names: name of the outgoing clock signal from the PHY PLL
Not valid to have this without '#clock-cells'.
Though I'm confused how this and the input clock name seem to match.
> +
> +Example:
> + phy@7786000 {
> + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
> + reg = <0x07786000 0xb8>;
> +
> + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
> + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
> + <&gcc GCC_PCIE_0_PIPE_ARES>;
> + reset-names = "phy", "pipe";
> +
> + vdda-vp-supply = <&vreg_l3_1p05>;
> + vdda-vph-supply = <&vreg_l5_1p8>;
> +
> + clock-output-names = "pcie_0_pipe_clk";
> + #phy-cells = <0>;
> + };
> --
> 2.18.0
>
