Hi, Lucas

Best Regards!
Anson Huang

> -----Original Message-----
> From: Lucas Stach [mailto:l.st...@pengutronix.de]
> Sent: 2019年2月22日 18:55
> To: Anson Huang <anson.hu...@nxp.com>; robh...@kernel.org;
> mark.rutl...@arm.com; shawn...@kernel.org; s.ha...@pengutronix.de;
> ker...@pengutronix.de; feste...@gmail.com; mturque...@baylibre.com;
> sb...@kernel.org; Abel Vesa <abel.v...@nxp.com>; ccai...@baylibre.com;
> a...@sigxcpu.org; devicet...@vger.kernel.org; linux-arm-
> ker...@lists.infradead.org; linux-kernel@vger.kernel.org; linux-
> c...@vger.kernel.org
> Cc: dl-linux-imx <linux-...@nxp.com>
> Subject: Re: [PATCH 1/3] clk: imx8mq: initialize clock tree earlier
> 
> Am Freitag, den 22.02.2019, 09:42 +0000 schrieb Anson Huang:
> > Currently on i.MX8MQ platform, clock driver is probed later than GPIO
> > driver, and GPIO driver does NOT have defer probe mechanism since the
> > GPIO clock is optional,
> 
> So this is what should be fixed. If there is a clock reference in the DT, 
> having
> the clock driver ready is not optional. Optional to the GPIO driver just means
> it won't fail if there is no clock reference at all.
> If there is and the clock provider is not yet there, it needs to do a
> PROBE_DEFER.
> 
> So that's a NACK on this patch.

OK, I see. Then I will do a patch for GPIO driver, and I just check other 
drivers, looks
like imx2 watchdog driver also has similar issue, I will do a patch too.

Thanks,
Anson.

> 
> Regards,
> Lucas
> 
> > some platforms have GPIO clocks and some are NOT. So it is an issue
> > that on i.MX8MQ platform, there are GPIO clocks defined, but due to
> > clock tree is NOT ready during GPIO driver probe, the GPIO clock
> > management will fail and cause system hang if GPIO clocks are OFF by
> > default.
> >
> > This patch changes the i.MX8MQ clock tree initialization using
> > CLK_OF_DECLARE instead of platform driver model to make clock tree
> > ready earlier than GPIO driver.
> >
> > Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> > ---
> >  drivers/clk/imx/clk-imx8mq.c | 33 +++++++--------------------------
> >  1 file changed, 7 insertions(+), 26 deletions(-)
> >
> > diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-
> > imx8mq.c index 26b57f4..2df1575 100644
> > --- a/drivers/clk/imx/clk-imx8mq.c
> > +++ b/drivers/clk/imx/clk-imx8mq.c
> > @@ -269,10 +269,9 @@ static const char *imx8mq_clko2_sels[] =
> > {"osc_25m", "sys2_pll_200m", "sys1_pll_
> >
> >  static struct clk_onecell_data clk_data;
> >
> > -static int imx8mq_clocks_probe(struct platform_device *pdev)
> > +static void __init imx8mq_clocks_init(struct device_node *np)
> >  {
> > -   struct device *dev = &pdev->dev;
> > -   struct device_node *np = dev->of_node;
> > +   struct device_node *anatop_np;
> >     void __iomem *base;
> >     int err;
> >     int i;
> > @@ -286,10 +285,10 @@ static int imx8mq_clocks_probe(struct
> > platform_device *pdev)
> >     clks[IMX8MQ_CLK_EXT3] = of_clk_get_by_name(np, "clk_ext3");
> >     clks[IMX8MQ_CLK_EXT4] = of_clk_get_by_name(np, "clk_ext4");
> >
> > -   np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-anatop");
> > -   base = of_iomap(np, 0);
> > +   anatop_np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-
> > anatop");
> > +   base = of_iomap(anatop_np, 0);
> >     if (WARN_ON(!base))
> > -           return -ENOMEM;
> > +           return;
> >
> >     clks[IMX8MQ_ARM_PLL_REF_SEL] = imx_clk_mux("arm_pll_ref_sel",
> base +
> > 0x28, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
> >     clks[IMX8MQ_GPU_PLL_REF_SEL] = imx_clk_mux("gpu_pll_ref_sel",
> base +
> > 0x18, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); @@ -389,10
> > +388,9 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
> >     clks[IMX8MQ_SYS2_PLL_500M] =
> > imx_clk_fixed_factor("sys2_pll_500m", "sys2_pll_out", 1, 2);
> >     clks[IMX8MQ_SYS2_PLL_1000M] =
> > imx_clk_fixed_factor("sys2_pll_1000m", "sys2_pll_out", 1, 1);
> >
> > -   np = dev->of_node;
> >     base = of_iomap(np, 0);
> >     if (WARN_ON(!base))
> > -           return -ENOMEM;
> > +           return;
> >
> >     /* CORE */
> >     clks[IMX8MQ_CLK_A53_SRC] = imx_clk_mux2("arm_a53_src", base +
> > 0x8000, 24, 3, imx8mq_a53_sels, ARRAY_SIZE(imx8mq_a53_sels)); @@
> > -568,22 +566,5 @@ static int imx8mq_clocks_probe(struct
> > platform_device *pdev)
> >
> >     err = of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
> >     WARN_ON(err);
> > -
> > -   return err;
> >  }
> > -
> > -static const struct of_device_id imx8mq_clk_of_match[] = {
> > -   { .compatible = "fsl,imx8mq-ccm" },
> > -   { /* Sentinel */ },
> > -};
> > -MODULE_DEVICE_TABLE(of, imx8mq_clk_of_match);
> > -
> > -
> > -static struct platform_driver imx8mq_clk_driver = {
> > -   .probe = imx8mq_clocks_probe,
> > -   .driver = {
> > -           .name = "imx8mq-ccm",
> > -           .of_match_table = of_match_ptr(imx8mq_clk_of_match),
> > -   },
> > -};
> > -module_platform_driver(imx8mq_clk_driver);
> > +CLK_OF_DECLARE(imx8mq, "fsl,imx8mq-ccm", imx8mq_clocks_init);

Reply via email to