Guennadi Liakhovetski wrote:
On Thu, 9 Aug 2007, Oncaphillis wrote:
I hope I found the the misconfigured part. I didn't look
at /etc/inittab. It opens a getty on /dev/ttyS0. That
might do the trick. Have to recompile my kernel right now with
standard config to check this out.
Hm, for that you don't have to recompile the kernel... unless you modified
it before, of course. Just change your inittab and reboot.
Oh I know... I just played around with the kernel config
to solve the problem and ended up with a kernel that didn't
boot at all..
Well ... it doesn't seem to need the daemons but at least
the kuro_boot script or something similar has to be executed
once sending the right init strings to the AVR or your system
reboots after a few minutes at least on my box.
No, shouldn't be needed either. You should get a string in dmesg like
"linkstation: disarming the AVR watchdog:", and the watchdog should be
off. Just take the original .dts, unmodified kernel sources and close
enough to original (arch/powerpc/configs/linkstation_defconfig) .config
and it should work.
Thanks again...
Thanks
Guennadi
---
Guennadi Liakhovetski
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
