Hi, Guenter Best Regards! Anson Huang
> -----Original Message----- > From: Guenter Roeck [mailto:groe...@gmail.com] On Behalf Of Guenter > Roeck > Sent: 2019年2月24日 11:20 > To: Anson Huang <anson.hu...@nxp.com>; Rob Herring <r...@kernel.org> > Cc: mark.rutl...@arm.com; shawn...@kernel.org; > s.ha...@pengutronix.de; ker...@pengutronix.de; feste...@gmail.com; > catalin.mari...@arm.com; will.dea...@arm.com; w...@linux-watchdog.org; > Aisheng Dong <aisheng.d...@nxp.com>; ulf.hans...@linaro.org; Daniel > Baluta <daniel.bal...@nxp.com>; Andy Gross <andy.gr...@linaro.org>; > horms+rene...@verge.net.au; he...@sntech.de; a...@arndb.de; > bjorn.anders...@linaro.org; ja...@amarulasolutions.com; > enric.balle...@collabora.com; marc.w.gonza...@free.fr; o...@lixom.net; > devicet...@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm- > ker...@lists.infradead.org; linux-watch...@vger.kernel.org; dl-linux-imx > <linux-...@nxp.com> > Subject: Re: [PATCH RESEND V2 1/4] dt-bindings: fsl: scu: add watchdog > binding > > On 2/23/19 7:04 PM, Anson Huang wrote: > > Hi, Guenter/Rob > > > > Best Regards! > > Anson Huang > > > >> -----Original Message----- > >> From: Guenter Roeck [mailto:groe...@gmail.com] On Behalf Of Guenter > >> Roeck > >> Sent: 2019年2月24日 1:08 > >> To: Rob Herring <r...@kernel.org>; Anson Huang > <anson.hu...@nxp.com> > >> Cc: mark.rutl...@arm.com; shawn...@kernel.org; > >> s.ha...@pengutronix.de; ker...@pengutronix.de; feste...@gmail.com; > >> catalin.mari...@arm.com; will.dea...@arm.com; wim@linux- > watchdog.org; > >> Aisheng Dong <aisheng.d...@nxp.com>; ulf.hans...@linaro.org; Daniel > >> Baluta <daniel.bal...@nxp.com>; Andy Gross <andy.gr...@linaro.org>; > >> horms+rene...@verge.net.au; he...@sntech.de; a...@arndb.de; > >> bjorn.anders...@linaro.org; ja...@amarulasolutions.com; > >> enric.balle...@collabora.com; marc.w.gonza...@free.fr; > >> o...@lixom.net; devicet...@vger.kernel.org; > >> linux-kernel@vger.kernel.org; linux-arm- ker...@lists.infradead.org; > >> linux-watch...@vger.kernel.org; dl-linux-imx <linux-...@nxp.com> > >> Subject: Re: [PATCH RESEND V2 1/4] dt-bindings: fsl: scu: add > >> watchdog binding > >> > >> On 2/22/19 11:52 AM, Rob Herring wrote: > >>> On Mon, Feb 18, 2019 at 06:53:48AM +0000, Anson Huang wrote: > >>>> Add i.MX8QXP system controller watchdog binding. > >>>> > >>>> Signed-off-by: Anson Huang <anson.hu...@nxp.com> > >>>> --- > >>>> Changes since V1: > >>>> - update dts node name to "watchdog"; > >>>> --- > >>>> Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 10 > >> ++++++++++ > >>>> 1 file changed, 10 insertions(+) > >>>> > >>>> diff --git > >>>> a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > >>>> b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > >>>> index 4b79751..f388ec6 100644 > >>>> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > >>>> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > >>>> @@ -136,6 +136,12 @@ Required properties: > >>>> resource id for thermal driver to get > >>>> temperature > >> via > >>>> SCU IPC. > >>>> > >>>> +Watchdog bindings based on SCU Message Protocol > >>>> +------------------------------------------------------------ > >>>> + > >>>> +Required properties: > >>>> +- compatible: should be "fsl,imx8qxp-sc-wdt"; > >>>> + > >>>> Example (imx8qxp): > >>>> ------------- > >>>> lsio_mu1: mailbox@5d1c0000 { > >>>> @@ -188,6 +194,10 @@ firmware { > >>>> tsens-num = <1>; > >>>> #thermal-sensor-cells = <1>; > >>>> }; > >>>> + > >>>> + watchdog: watchdog { > >>>> + compatible = "fsl,imx8qxp-sc-wdt"; > >>> > >>> As-is, there's no reason for this to be in DT. The parent node's > >>> driver can instantiate the wdog. > >>> > >> > >> As the driver is currently written, you are correct, since it doesn't > >> accept watchdog timeout configuration through devicetree. > >> > >> Question is if that is intended. Is it ? > > > > I am a little confused, do you mean we no need to have "watchdog" node > in side "scu" > > node? Or we need to modify the watchdog node's compatible string to " > > fsl,imx-sc-wdt" to make it more generic for other platforms? If yes, I can > resend the patch series to modify it. > > > > I think Rob suggested that the SCU parent driver should instantiate the > watchdog without explicit watchdog node. That would be possible, but it > currently uses > devm_of_platform_populate() to do the instantiation, and changing that > would be a mess. Besides, it does sem to me that your suggested node would > describe the hardware, so I am not sure I understand the reasoning. > > For my part I referred to > watchdog_init_timeout(imx_sc_wdd, DEFAULT_TIMEOUT, &pdev- > >dev); in the driver, which guarantees that the timeout property will not be > used to set the timeout. A more common implementation would have been > > imx_sc_wdd->timeout = DEFAULT_TIMEOUT; > ret = watchdog_init_timeout(imx_sc_wdd, timeout, &pdev->dev); > > where 'timeout' is the module parameter. Which is actually not used in your > driver. > Hmm ... I wasn't careful enough with my review. The timeout initialization as- > is doesn't make sense. I'll comment on that in the patch. I understand now, in our cases, I would still prefer to have watchdog node under the SCU parent node, since there could be other property setting difference between different i.MX platforms with system controller watchdog inside, using the SCU node to instantiate makes us a little confused about the watchdog, so if it is NOT that critical, I think we should keep watchdog node. But to make the watchdog driver more generic for other i.MX platforms, I changed the compatible string to "fsl,imx-sc-wdt" in driver, and each SoC should has it as fallback if it can reuse this watchdog driver. Thanks, Anson > > Guenter > > > Anson. > > > >> > >> Thanks, > >> Guenter
