On 01/02/2019 09:30, Weiyi Lu wrote:
> From: Owen Chen <owen.c...@mediatek.com>
>
> PLLs with tuner_en bit, such as APLL1, need to disable
> tuner_en before apply new frequency settings, or the new frequency
> settings (pcw) will not be applied.
> The tuner_en bit will be disabled during changing PLL rate
> and be restored after new settings applied.
> Another minor change is to correct the macro name of pcw change bit
> to CON1_PCW_CHG because PCW_CHG(BIT31) is on CON1.
>
> Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support)
> Cc: <sta...@vger.kernel.org>
> Signed-off-by: Owen Chen <owen.c...@mediatek.com>
> ---
> drivers/clk/mediatek/clk-pll.c | 33 +++++++++++++++++++++++++++++++--
> 1 file changed, 31 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
> index f54e4015b0b1..f0ff5f535c7e 100644
> --- a/drivers/clk/mediatek/clk-pll.c
> +++ b/drivers/clk/mediatek/clk-pll.c
> @@ -27,7 +27,7 @@
> #define CON0_BASE_EN BIT(0)
> #define CON0_PWR_ON BIT(0)
> #define CON0_ISO_EN BIT(1)
> -#define CON0_PCW_CHG BIT(31)
> +#define CON1_PCW_CHG BIT(31)
>
> #define AUDPLL_TUNER_EN BIT(31)
>
> @@ -93,9 +93,31 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll,
> u32 pcw,
> {
> u32 con1, val;
> int pll_en;
> + u32 tuner_en = 0;
> + u32 tuner_en_mask;
> + void __iomem *tuner_en_addr = NULL;
>
> pll_en = readl(pll->base_addr + REG_CON0) & CON0_BASE_EN;
>
> + /* disable tuner */
> + if (pll->tuner_en_addr) {
> + tuner_en_addr = pll->tuner_en_addr;
> + tuner_en_mask = BIT(pll->data->tuner_en_bit);
> + } else if (pll->tuner_addr) {
> + tuner_en_addr = pll->tuner_addr;
> + tuner_en_mask = AUDPLL_TUNER_EN;
> + }
> +
> + if (tuner_en_addr) {
> + val = readl(tuner_en_addr);
> + tuner_en = val & tuner_en_mask;
> +
> + if (tuner_en) {
> + val &= ~tuner_en_mask;
> + writel(val, tuner_en_addr);
> + }
> + }
> +
Why don't we use a flag here, it would make the code easier to understand.
I think it would also help if you put this code in a separate function.
Regards,
Matthias
> /* set postdiv */
> val = readl(pll->pd_addr);
> val &= ~(POSTDIV_MASK << pll->data->pd_shift);
> @@ -116,12 +138,19 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll
> *pll, u32 pcw,
> con1 = readl(pll->base_addr + REG_CON1);
>
> if (pll_en)
> - con1 |= CON0_PCW_CHG;
> + con1 |= CON1_PCW_CHG;
>
> writel(con1, pll->base_addr + REG_CON1);
> if (pll->tuner_addr)
> writel(con1 + 1, pll->tuner_addr);
>
> + /* restore tuner_en */
> + if (tuner_en_addr && tuner_en) {
> + val = readl(tuner_en_addr);
> + val |= tuner_en_mask;
> + writel(val, tuner_en_addr);
> + }
> +
> if (pll_en)
> udelay(20);
> }
>
