On 01. 03. 19 3:13, Shawn Guo wrote:
On Tue, Feb 19, 2019 at 02:37:00PM +0100, Michal Vokáč wrote:
The PHY must add delays to both Tx and Rx clock on the cpu port
to work propperly.
It worked with the rgmii mode before beacause the qca8k driver
(incorrecly) enabled delays in that mode.
Signed-off-by: Michal Vokáč <michal.vo...@ysoft.com>
---
This imx6dl-yapp4 platform is currently waiting in linux-next.
Commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay for RGMII mode"), now
also in linux-next removed the delays from the RGMII mode so the networking
stopped working.
Recently Koul submitted a patch that implements the rgmii-id mode to fix
the issue [1].
As the networking is broken at this moment it does not matter which patch
goes in first. It is not neccessary to wait until the Koul's patch is
applied/merged if that should be the case.
[1] http://patchwork.ozlabs.org/patch/1044505/
Can we have such useful info in the commit log in some proper form?
Sure, I will transplant relevant parts of the message into the commit
log. I just thought that most of this info will be outdated immediately
after applying.
BTW the patch[1] from Vinod is already merged.
Michal
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index b715ab0fa1ff..091d829f6b05 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -125,7 +125,7 @@
ethphy0: port@0 {
reg = <0>;
label = "cpu";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
ethernet = <&fec>;
fixed-link {
--
2.1.4