Hi, On Sat, 23 Feb 2019 10:23:23 -0800 Tony Lindgren <t...@atomide.com> wrote:
> * Andreas Kemnade <andr...@kemnade.info> [190223 11:48]:
> > Since commit
> > 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for
> > suspend")
> > on gta04 we have handle_twl4030_pih() called in situations where
> > pm_runtime_get()
> > in i2c-omap.c returns -EACCES.
> > [ 86.474365] Freezing remaining freezable tasks ... (elapsed 0.002
> > seconds) done.
> > [ 86.485473] printk: Suspending console(s) (use no_console_suspend to
> > debug)
> > [ 86.555572] Disabling non-boot CPUs ...
> > [ 86.555664] Successfully put all powerdomains to target state
> > [ 86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
> > [ 86.563751] twl4030: I2C error -13 reading PIH ISR
> > [ 86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
> > [ 86.563812] twl4030: I2C error -13 reading PIH ISR
> > [ 86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
> > [ 86.563903] twl4030: I2C error -13 reading PIH ISR
> >
> > This happens when we wakeup via something behing twl4030
> > (powerbutton or rtc alarm).
> > This goes on for minutes until the system is finally resumed.
> > Disable the irq on suspend and enable it on resume to avoid
> > having i2c access problems when the irq registers are checked.
>
> Thanks for fixing this, still works fine for me for rtcwake:
>
> Tested-by: Tony Lindgren <t...@atomide.com>
>
hmm, in which version we will see this regression fixed?
I consider this whole thing as a reminder to finally
improve my automated test facilities and finally add the suspend/power
consumption test scripts I have to it so I can catch such things earlier.
Regards,
Andreas
pgp6s9ib6PNT9.pgp
Description: OpenPGP digital signature
