[PATCH net-next v2 1/3] net: phy: marvell10g: implement suspend/resume callbacks

[Antoine Tenart]

This patch adds the suspend/resume callbacks for Marvell 10G PHYs. The
three PCS (base-t, base-r and 1000base-x) are set in low power (the PCS
are powered down) when the PHY isn't used.

Signed-off-by: Antoine Tenart <antoine.ten...@bootlin.com>
---
 drivers/net/phy/marvell10g.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 79106e70010f..92462344c5ad 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -226,11 +226,25 @@ static int mv3310_probe(struct phy_device *phydev)
 
 static int mv3310_suspend(struct phy_device *phydev)
 {
+       phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_T + MDIO_CTRL1,
+                      MDIO_CTRL1_LPOWER, MDIO_CTRL1_LPOWER);
+       phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_CTRL1,
+                      MDIO_CTRL1_LPOWER, MDIO_CTRL1_LPOWER);
+       phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_1000BASEX + MDIO_CTRL1,
+                      MDIO_CTRL1_LPOWER, MDIO_CTRL1_LPOWER);
+
        return 0;
 }
 
 static int mv3310_resume(struct phy_device *phydev)
 {
+       phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_T + MDIO_CTRL1,
+                      MDIO_CTRL1_LPOWER, 0);
+       phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_CTRL1,
+                      MDIO_CTRL1_LPOWER, 0);
+       phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_1000BASEX + MDIO_CTRL1,
+                      MDIO_CTRL1_LPOWER, 0);
+
        return mv3310_hwmon_config(phydev, true);
 }
 
-- 
2.20.1