Add doc for dt binding maxbotix,i2cxl. This binding is for MaxBotix
I2CXL-MaxSonar ultrasonic rangers which share a common i2c interface.
Signed-off-by: Andreas Klinger <a...@it-klinger.de>
---
.../bindings/iio/proximity/maxbotix,i2cxl.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644
Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt
diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt
b/Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt
new file mode 100644
index 000000000000..528f428fc583
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt
@@ -0,0 +1,21 @@
+* MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type mb12x2 using
+ the i2c interface for ranging
+
+Required properties:
+ - compatible: Should be "maxbotix,i2cxl"
+
+ - reg: i2c address of the device
+
+Optional properties:
+ - status-gpios: Status gpio (input) used to announce the preceding
+ reading request has finished and that data is
+ available. If no status gpio is specified the
+ device driver falls back to wait until data can be
+ retrieved.
+
+Example:
+proximity@70 {
+ compatible = "maxbotix,i2cxl";
+ reg = <0x70>;
+ status-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+};
--
2.11.0
