Add led nodes on Rock64. Use heartbeat trigger for the red standby led and use mmc0 trigger for the white power led.
Signed-off-by: Jonas Karlman <[email protected]> --- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 8f3e4b7d55c9..c4031b7718fc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -65,6 +65,20 @@ regulator-max-microvolt = <5000000>; }; + leds { + compatible = "gpio-leds"; + + standby { + gpios = <&rk805 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + power { + gpios = <&rk805 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + }; + }; + sound { compatible = "audio-graph-card"; label = "rockchip,rk3328"; @@ -157,6 +171,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; -- 2.17.1
