Several files are/will be using the same #defines to use the Flextimer
module. Regroup them in a common file.

Signed-off-by: Patrick Havelange <patrick.havela...@essensium.com>
Reviewed-by: Esben Haabendal <es...@haabendal.dk>
---
Changes v2
     - Commit message
---
 include/linux/fsl/ftm.h | 88 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 include/linux/fsl/ftm.h

diff --git a/include/linux/fsl/ftm.h b/include/linux/fsl/ftm.h
new file mode 100644
index 000000000000..d59011acf66c
--- /dev/null
+++ b/include/linux/fsl/ftm.h
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef __FSL_FTM_H__
+#define __FSL_FTM_H__
+
+#define FTM_SC       0x0 /* Status And Control */
+#define FTM_CNT      0x4 /* Counter */
+#define FTM_MOD      0x8 /* Modulo */
+
+#define FTM_CNTIN    0x4C /* Counter Initial Value */
+#define FTM_STATUS   0x50 /* Capture And Compare Status */
+#define FTM_MODE     0x54 /* Features Mode Selection */
+#define FTM_SYNC     0x58 /* Synchronization */
+#define FTM_OUTINIT  0x5C /* Initial State For Channels Output */
+#define FTM_OUTMASK  0x60 /* Output Mask */
+#define FTM_COMBINE  0x64 /* Function For Linked Channels */
+#define FTM_DEADTIME 0x68 /* Deadtime Insertion Control */
+#define FTM_EXTTRIG  0x6C /* FTM External Trigger */
+#define FTM_POL      0x70 /* Channels Polarity */
+#define FTM_FMS      0x74 /* Fault Mode Status */
+#define FTM_FILTER   0x78 /* Input Capture Filter Control */
+#define FTM_FLTCTRL  0x7C /* Fault Control */
+#define FTM_QDCTRL   0x80 /* Quadrature Decoder Control And Status */
+#define FTM_CONF     0x84 /* Configuration */
+#define FTM_FLTPOL   0x88 /* FTM Fault Input Polarity */
+#define FTM_SYNCONF  0x8C /* Synchronization Configuration */
+#define FTM_INVCTRL  0x90 /* FTM Inverting Control */
+#define FTM_SWOCTRL  0x94 /* FTM Software Output Control */
+#define FTM_PWMLOAD  0x98 /* FTM PWM Load */
+
+#define FTM_SC_CLK_MASK_SHIFT  3
+#define FTM_SC_CLK_MASK                (3 << FTM_SC_CLK_MASK_SHIFT)
+#define FTM_SC_TOF             0x80
+#define FTM_SC_TOIE            0x40
+#define FTM_SC_CPWMS           0x20
+#define FTM_SC_CLKS            0x18
+#define FTM_SC_PS_1            0x0
+#define FTM_SC_PS_2            0x1
+#define FTM_SC_PS_4            0x2
+#define FTM_SC_PS_8            0x3
+#define FTM_SC_PS_16           0x4
+#define FTM_SC_PS_32           0x5
+#define FTM_SC_PS_64           0x6
+#define FTM_SC_PS_128          0x7
+#define FTM_SC_PS_MASK         0x7
+
+#define FTM_MODE_FAULTIE       0x80
+#define FTM_MODE_FAULTM                0x60
+#define FTM_MODE_CAPTEST       0x10
+#define FTM_MODE_PWMSYNC       0x8
+#define FTM_MODE_WPDIS         0x4
+#define FTM_MODE_INIT          0x2
+#define FTM_MODE_FTMEN         0x1
+
+/* NXP Errata: The PHAFLTREN and PHBFLTREN bits are tide to zero internally
+ * and these bits cannot be set. Flextimer cannot use Filter in
+ * Quadrature Decoder Mode.
+ * https://community.nxp.com/thread/467648#comment-1010319
+ */
+#define FTM_QDCTRL_PHAFLTREN   0x80
+#define FTM_QDCTRL_PHBFLTREN   0x40
+#define FTM_QDCTRL_PHAPOL      0x20
+#define FTM_QDCTRL_PHBPOL      0x10
+#define FTM_QDCTRL_QUADMODE    0x8
+#define FTM_QDCTRL_QUADDIR     0x4
+#define FTM_QDCTRL_TOFDIR      0x2
+#define FTM_QDCTRL_QUADEN      0x1
+
+#define FTM_FMS_FAULTF         0x80
+#define FTM_FMS_WPEN           0x40
+#define FTM_FMS_FAULTIN                0x10
+#define FTM_FMS_FAULTF3                0x8
+#define FTM_FMS_FAULTF2                0x4
+#define FTM_FMS_FAULTF1                0x2
+#define FTM_FMS_FAULTF0                0x1
+
+#define FTM_CSC_BASE           0xC
+#define FTM_CSC_MSB            0x20
+#define FTM_CSC_MSA            0x10
+#define FTM_CSC_ELSB           0x8
+#define FTM_CSC_ELSA           0x4
+#define FTM_CSC(_channel)      (FTM_CSC_BASE + ((_channel) * 8))
+
+#define FTM_CV_BASE            0x10
+#define FTM_CV(_channel)       (FTM_CV_BASE + ((_channel) * 8))
+
+#define FTM_PS_MAX             7
+
+#endif
-- 
2.19.1

Reply via email to