Add the PCIe reference clock feeding the USB3 + PCIE combo PHY. This PLL needs a very precise register sequence to permit to be locked, thus using the specific clk-pll pcie ops.
The PLL is then followed by : - a fixed /2 divider - a 5-bit 1-based divider - a final /2 divider This reference clock is fixed to 100MHz, thus only a single PLL setup is added. Signed-off-by: Neil Armstrong <[email protected]> --- drivers/clk/meson/g12a.c | 118 +++++++++++++++++++++++++++++++++++++++ drivers/clk/meson/g12a.h | 5 +- 2 files changed, 122 insertions(+), 1 deletion(-) diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c index 80a7172df2a6..d382c21a29e5 100644 --- a/drivers/clk/meson/g12a.c +++ b/drivers/clk/meson/g12a.c @@ -614,6 +614,118 @@ static struct clk_regmap g12a_hifi_pll = { }, }; +/* + * The Meson G12A PCIE PLL is fined tuned to deliver a very precise + * 100MHz reference clock for the PCIe Analog PHY, and thus requires + * a strict register sequence to enable the PLL. + */ +static const struct reg_sequence g12a_pcie_pll_init_regs[] = { + { .reg = HHI_PCIE_PLL_CNTL0, .def = 0x20090496 }, + { .reg = HHI_PCIE_PLL_CNTL0, .def = 0x30090496 }, + { .reg = HHI_PCIE_PLL_CNTL1, .def = 0x00000000 }, + { .reg = HHI_PCIE_PLL_CNTL2, .def = 0x00001100 }, + { .reg = HHI_PCIE_PLL_CNTL3, .def = 0x10058e00 }, + { .reg = HHI_PCIE_PLL_CNTL4, .def = 0x000100c0 }, + { .reg = HHI_PCIE_PLL_CNTL5, .def = 0x68000048 }, + { .reg = HHI_PCIE_PLL_CNTL5, .def = 0x68000068, .delay_us = 20 }, + { .reg = HHI_PCIE_PLL_CNTL4, .def = 0x008100c0, .delay_us = 10 }, + { .reg = HHI_PCIE_PLL_CNTL0, .def = 0x34090496 }, + { .reg = HHI_PCIE_PLL_CNTL0, .def = 0x14090496, .delay_us = 10 }, + { .reg = HHI_PCIE_PLL_CNTL2, .def = 0x00001000 }, +}; + +/* Keep a single entry table for recalc/round_rate() ops */ +static const struct pll_params_table g12a_pcie_pll_table[] = { + PLL_PARAMS(150, 1), + {0, 0}, +}; + +static struct clk_regmap g12a_pcie_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = HHI_PCIE_PLL_CNTL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = HHI_PCIE_PLL_CNTL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = HHI_PCIE_PLL_CNTL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = HHI_PCIE_PLL_CNTL1, + .shift = 0, + .width = 12, + }, + .l = { + .reg_off = HHI_PCIE_PLL_CNTL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_PCIE_PLL_CNTL0, + .shift = 29, + .width = 1, + }, + .table = g12a_pcie_pll_table, + .init_regs = g12a_pcie_pll_init_regs, + .init_count = ARRAY_SIZE(g12a_pcie_pll_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "pcie_pll_dco", + .ops = &meson_clk_pcie_pll_ops, + .parent_names = (const char *[]){ IN_PREFIX "xtal" }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor g12a_pcie_pll_dco_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "pcie_pll_dco_div2", + .ops = &clk_fixed_factor_ops, + .parent_names = (const char *[]){ "pcie_pll_dco" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap g12a_pcie_pll_od = { + .data = &(struct clk_regmap_div_data){ + .offset = HHI_PCIE_PLL_CNTL0, + .shift = 16, + .width = 5, + .flags = CLK_DIVIDER_ROUND_CLOSEST | + CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, + }, + .hw.init = &(struct clk_init_data){ + .name = "pcie_pll_od", + .ops = &clk_regmap_divider_ops, + .parent_names = (const char *[]){ "pcie_pll_dco_div2" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor g12a_pcie_pll = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "pcie_pll_pll", + .ops = &clk_fixed_factor_ops, + .parent_names = (const char *[]){ "pcie_pll_od" }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + static struct clk_regmap g12a_hdmi_pll_dco = { .data = &(struct meson_clk_pll_data){ .en = { @@ -2499,6 +2611,10 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = { [CLKID_CPU_CLK_AXI] = &g12a_cpu_clk_axi.hw, [CLKID_CPU_CLK_TRACE_DIV] = &g12a_cpu_clk_trace_div.hw, [CLKID_CPU_CLK_TRACE] = &g12a_cpu_clk_trace.hw, + [CLKID_PCIE_PLL_DCO] = &g12a_pcie_pll_dco.hw, + [CLKID_PCIE_PLL_DCO_DIV2] = &g12a_pcie_pll_dco_div2.hw, + [CLKID_PCIE_PLL_OD] = &g12a_pcie_pll_od.hw, + [CLKID_PCIE_PLL] = &g12a_pcie_pll.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -2685,6 +2801,8 @@ static struct clk_regmap *const g12a_clk_regmaps[] = { &g12a_cpu_clk_axi, &g12a_cpu_clk_trace_div, &g12a_cpu_clk_trace, + &g12a_pcie_pll_od, + &g12a_pcie_pll_dco, }; static const struct meson_eeclkc_data g12a_clkc_data = { diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h index 70aa469ca1cf..1393a09730a6 100644 --- a/drivers/clk/meson/g12a.h +++ b/drivers/clk/meson/g12a.h @@ -186,8 +186,11 @@ #define CLKID_CPU_CLK_AXI 195 #define CLKID_CPU_CLK_TRACE_DIV 196 #define CLKID_CPU_CLK_TRACE 197 +#define CLKID_PCIE_PLL_DCO 198 +#define CLKID_PCIE_PLL_DCO_DIV2 199 +#define CLKID_PCIE_PLL_OD 200 -#define NR_CLKS 198 +#define NR_CLKS 202 /* include the CLKIDs that have been made part of the DT binding */ #include <dt-bindings/clock/g12a-clkc.h> -- 2.20.1
