On 2/03/19 7:20 AM, Sowjanya Komatineni wrote:
> This patch adds support for post tuning process needed for some hosts
> to perform after successful completion of HW tuning.
>
> Signed-off-by: Sowjanya Komatineni <skomatin...@nvidia.com>
> ---
> drivers/mmc/host/sdhci.c | 6 +++++-
> drivers/mmc/host/sdhci.h | 1 +
> 2 files changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index e9e919218006..976d4d1e2400 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -2392,8 +2392,12 @@ static int __sdhci_execute_tuning(struct sdhci_host
> *host, u32 opcode)
>
> ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
> - if (ctrl & SDHCI_CTRL_TUNED_CLK)
> + if (ctrl & SDHCI_CTRL_TUNED_CLK) {
> + if (host->ops->post_tuning)
> + host->ops->post_tuning(host);
> return 0; /* Success! */
I think you can hook .execute_tuning and just check if the return value is
zero before doing post tuning. i.e. something like:
host->mmc_host_ops.execute_tuning = tegra_sdhci_execute_tuning;
int tegra_sdhci_execute_tuning(blah)
{
int err;
err = sdhci_execute_tuning(blah);
if (!err)
tegra_sdhci_post_tuning(host);
}
> + }
> +
> break;
> }
>
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index c80e0d6f9b10..236d67778645 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -639,6 +639,7 @@ struct sdhci_ops {
> void (*reset)(struct sdhci_host *host, u8 mask);
> int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
> int (*get_max_tuning_loop_count)(struct sdhci_host *host);
> + void (*post_tuning)(struct sdhci_host *host);
> void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
> void (*hw_reset)(struct sdhci_host *host);
> void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
>
