Refer to new "function" and "color" properties and mark "label"
as deprecated.
Signed-off-by: Jacek Anaszewski <jacek.anaszew...@gmail.com>
---
Documentation/devicetree/bindings/leds/leds-aat1290.txt | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt
b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
index 85c0c58617f6..9192ff42c886 100644
--- a/Documentation/devicetree/bindings/leds/leds-aat1290.txt
+++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
@@ -32,15 +32,18 @@ Required properties of the LED child node:
formula: T = 8.82 * 10^9 * Ct.
Optional properties of the LED child node:
-- label : see Documentation/devicetree/bindings/leds/common.txt
+- function : see Documentation/devicetree/bindings/leds/common.txt
+- color : see Documentation/devicetree/bindings/leds/common.txt
+- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
a switch that allows for routing strobe signal either from the host or from
the camera sensor):
#include "exynos4412.dtsi"
+#include <dt-bindings/leds/common.h>
-aat1290 {
+led-controller {
compatible = "skyworks,aat1290";
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
@@ -50,8 +53,9 @@ aat1290 {
pinctrl-1 = <&camera_flash_host>;
pinctrl-2 = <&camera_flash_isp>;
- camera_flash: flash-led {
- label = "aat1290-flash";
+ camera_flash: led {
+ function = LED_FUNCTION_FLASH;
+ color = LED_COLOR_NAME_WHITE;
led-max-microamp = <520833>;
flash-max-microamp = <1012500>;
flash-max-timeout-us = <1940000>;
--
2.11.0
