Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <i...@metux.net>
---
drivers/media/i2c/Kconfig | 6 +-
drivers/media/platform/Kconfig | 150 +++++------
drivers/media/platform/am437x/Kconfig | 8 +-
drivers/media/platform/atmel/Kconfig | 4 +-
drivers/media/platform/davinci/Kconfig | 50 ++--
drivers/media/platform/exynos4-is/Kconfig | 2 +-
drivers/media/platform/sunxi/sun6i-csi/Kconfig | 2 +-
drivers/media/platform/xilinx/Kconfig | 4 +-
drivers/media/radio/si470x/Kconfig | 4 +-
drivers/media/rc/Kconfig | 343 ++++++++++++-------------
drivers/media/rc/img-ir/Kconfig | 52 ++--
11 files changed, 308 insertions(+), 317 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 6d32f8d..b29a77c 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1113,10 +1113,10 @@ config VIDEO_M52790
tristate "Mitsubishi M52790 A/V switch"
depends on VIDEO_V4L2 && I2C
---help---
- Support for the Mitsubishi M52790 A/V switch.
+ Support for the Mitsubishi M52790 A/V switch.
- To compile this driver as a module, choose M here: the
- module will be called m52790.
+ To compile this driver as a module, choose M here: the
+ module will be called m52790.
config VIDEO_I2C
tristate "I2C transport video support"
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 4acbed1..1d88945 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -19,9 +19,9 @@ config VIDEO_VIA_CAMERA
select VIDEOBUF_DMA_SG
select VIDEO_OV7670
help
- Driver support for the integrated camera controller in VIA
- Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
- with ov7670 sensors.
+ Driver support for the integrated camera controller in VIA
+ Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
+ with ov7670 sensors.
#
# Platform multimedia device configuration
@@ -185,8 +185,8 @@ config VIDEO_CODA
select V4L2_MEM2MEM_DEV
select GENERIC_ALLOCATOR
---help---
- Coda is a range of video codec IPs that supports
- H.264, MPEG-4, and other video formats.
+ Coda is a range of video codec IPs that supports
+ H.264, MPEG-4, and other video formats.
config VIDEO_IMX_VDOA
def_tristate VIDEO_CODA if SOC_IMX6Q || COMPILE_TEST
@@ -219,13 +219,13 @@ config VIDEO_MEDIATEK_VPU
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_MEDIATEK || COMPILE_TEST
---help---
- This driver provides downloading VPU firmware and
- communicating with VPU. This driver for hw video
- codec embedded in Mediatek's MT8173 SOCs. It is able
- to handle video decoding/encoding in a range of formats.
+ This driver provides downloading VPU firmware and
+ communicating with VPU. This driver for hw video
+ codec embedded in Mediatek's MT8173 SOCs. It is able
+ to handle video decoding/encoding in a range of formats.
- To compile this driver as a module, choose M here: the
- module will be called mtk-vpu.
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-vpu.
config VIDEO_MEDIATEK_MDP
tristate "Mediatek MDP driver"
@@ -237,11 +237,11 @@ config VIDEO_MEDIATEK_MDP
select VIDEO_MEDIATEK_VPU
default n
---help---
- It is a v4l2 driver and present in Mediatek MT8173 SoCs.
- The driver supports for scaling and color space conversion.
+ It is a v4l2 driver and present in Mediatek MT8173 SoCs.
+ The driver supports for scaling and color space conversion.
- To compile this driver as a module, choose M here: the
- module will be called mtk-mdp.
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-mdp.
config VIDEO_MEDIATEK_VCODEC
tristate "Mediatek Video Codec driver"
@@ -253,12 +253,12 @@ config VIDEO_MEDIATEK_VCODEC
select VIDEO_MEDIATEK_VPU
default n
---help---
- Mediatek video codec driver provides HW capability to
- encode and decode in a range of video formats
- This driver rely on VPU driver to communicate with VPU.
+ Mediatek video codec driver provides HW capability to
+ encode and decode in a range of video formats
+ This driver rely on VPU driver to communicate with VPU.
- To compile this driver as a module, choose M here: the
- module will be called mtk-vcodec
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-vcodec
config VIDEO_MEM2MEM_DEINTERLACE
tristate "Deinterlace support"
@@ -267,7 +267,7 @@ config VIDEO_MEM2MEM_DEINTERLACE
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
- Generic deinterlacing V4L2 driver.
+ Generic deinterlacing V4L2 driver.
config VIDEO_SAMSUNG_S5P_G2D
tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
@@ -297,7 +297,7 @@ config VIDEO_SAMSUNG_S5P_MFC
select VIDEOBUF2_DMA_CONTIG
default n
help
- MFC 5.1 and 6.x driver for V4L2
+ MFC 5.1 and 6.x driver for V4L2
config VIDEO_MX2_EMMAPRP
tristate "MX2 eMMa-PrP support"
@@ -306,9 +306,9 @@ config VIDEO_MX2_EMMAPRP
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
- MX2X chips have a PrP that can be used to process buffers from
- memory to memory. Operations include resizing and format
- conversion.
+ MX2X chips have a PrP that can be used to process buffers from
+ memory to memory. Operations include resizing and format
+ conversion.
config VIDEO_SAMSUNG_EXYNOS_GSC
tristate "Samsung Exynos G-Scaler driver"
@@ -358,16 +358,16 @@ config VIDEO_STI_DELTA
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_STI || COMPILE_TEST
help
- This V4L2 driver enables DELTA multi-format video decoder
- of STMicroelectronics STiH4xx SoC series allowing hardware
- decoding of various compressed video bitstream format in
- raw uncompressed format.
+ This V4L2 driver enables DELTA multi-format video decoder
+ of STMicroelectronics STiH4xx SoC series allowing hardware
+ decoding of various compressed video bitstream format in
+ raw uncompressed format.
- Use this option to see the decoders available for such
- hardware.
+ Use this option to see the decoders available for such
+ hardware.
- Please notice that the driver will only be built if
- at least one of the DELTA decoder below is selected.
+ Please notice that the driver will only be built if
+ at least one of the DELTA decoder below is selected.
if VIDEO_STI_DELTA
@@ -375,10 +375,10 @@ config VIDEO_STI_DELTA_MJPEG
bool "STMicroelectronics DELTA MJPEG support"
default y
help
- Enables DELTA MJPEG hardware support.
+ Enables DELTA MJPEG hardware support.
- To compile this driver as a module, choose M here:
- the module will be called st-delta.
+ To compile this driver as a module, choose M here:
+ the module will be called st-delta.
config VIDEO_STI_DELTA_DRIVER
tristate
@@ -397,8 +397,8 @@ config VIDEO_SH_VEU
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
- Support for the Video Engine Unit (VEU) on SuperH and
- SH-Mobile SoCs.
+ Support for the Video Engine Unit (VEU) on SuperH and
+ SH-Mobile SoCs.
config VIDEO_RENESAS_FDP1
tristate "Renesas Fine Display Processor"
@@ -590,49 +590,49 @@ config CEC_GPIO
between compatible devices.
config VIDEO_SAMSUNG_S5P_CEC
- tristate "Samsung S5P CEC driver"
- depends on ARCH_EXYNOS || COMPILE_TEST
- select CEC_CORE
- select CEC_NOTIFIER
- ---help---
- This is a driver for Samsung S5P HDMI CEC interface. It uses the
- generic CEC framework interface.
- CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
+ tristate "Samsung S5P CEC driver"
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ select CEC_CORE
+ select CEC_NOTIFIER
+ ---help---
+ This is a driver for Samsung S5P HDMI CEC interface. It uses the
+ generic CEC framework interface.
+ CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
config VIDEO_STI_HDMI_CEC
- tristate "STMicroelectronics STiH4xx HDMI CEC driver"
- depends on ARCH_STI || COMPILE_TEST
- select CEC_CORE
- select CEC_NOTIFIER
- ---help---
- This is a driver for STIH4xx HDMI CEC interface. It uses the
- generic CEC framework interface.
- CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
+ tristate "STMicroelectronics STiH4xx HDMI CEC driver"
+ depends on ARCH_STI || COMPILE_TEST
+ select CEC_CORE
+ select CEC_NOTIFIER
+ ---help---
+ This is a driver for STIH4xx HDMI CEC interface. It uses the
+ generic CEC framework interface.
+ CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
config VIDEO_STM32_HDMI_CEC
- tristate "STMicroelectronics STM32 HDMI CEC driver"
- depends on ARCH_STM32 || COMPILE_TEST
- select REGMAP
- select REGMAP_MMIO
- select CEC_CORE
- ---help---
- This is a driver for STM32 interface. It uses the
- generic CEC framework interface.
- CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
+ tristate "STMicroelectronics STM32 HDMI CEC driver"
+ depends on ARCH_STM32 || COMPILE_TEST
+ select REGMAP
+ select REGMAP_MMIO
+ select CEC_CORE
+ ---help---
+ This is a driver for STM32 interface. It uses the
+ generic CEC framework interface.
+ CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
config VIDEO_TEGRA_HDMI_CEC
- tristate "Tegra HDMI CEC driver"
- depends on ARCH_TEGRA || COMPILE_TEST
- select CEC_CORE
- select CEC_NOTIFIER
- ---help---
- This is a driver for the Tegra HDMI CEC interface. It uses the
- generic CEC framework interface.
- The CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
+ tristate "Tegra HDMI CEC driver"
+ depends on ARCH_TEGRA || COMPILE_TEST
+ select CEC_CORE
+ select CEC_NOTIFIER
+ ---help---
+ This is a driver for the Tegra HDMI CEC interface. It uses the
+ generic CEC framework interface.
+ The CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
config VIDEO_SECO_CEC
tristate "SECO Boards HDMI CEC driver"
diff --git a/drivers/media/platform/am437x/Kconfig
b/drivers/media/platform/am437x/Kconfig
index f4ce117..e9f7e8f 100644
--- a/drivers/media/platform/am437x/Kconfig
+++ b/drivers/media/platform/am437x/Kconfig
@@ -5,8 +5,8 @@ config VIDEO_AM437X_VPFE
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
- Support for AM437x Video Processing Front End based Video
- Capture Driver.
+ Support for AM437x Video Processing Front End based Video
+ Capture Driver.
- To compile this driver as a module, choose M here. The module
- will be called am437x-vpfe.
+ To compile this driver as a module, choose M here. The module
+ will be called am437x-vpfe.
diff --git a/drivers/media/platform/atmel/Kconfig
b/drivers/media/platform/atmel/Kconfig
index a211ef2..a57e310 100644
--- a/drivers/media/platform/atmel/Kconfig
+++ b/drivers/media/platform/atmel/Kconfig
@@ -6,8 +6,8 @@ config VIDEO_ATMEL_ISC
select REGMAP_MMIO
select V4L2_FWNODE
help
- This module makes the ATMEL Image Sensor Controller available
- as a v4l2 device.
+ This module makes the ATMEL Image Sensor Controller available
+ as a v4l2 device.
config VIDEO_ATMEL_ISI
tristate "ATMEL Image Sensor Interface (ISI) support"
diff --git a/drivers/media/platform/davinci/Kconfig
b/drivers/media/platform/davinci/Kconfig
index 06b5e58..2ac21ca 100644
--- a/drivers/media/platform/davinci/Kconfig
+++ b/drivers/media/platform/davinci/Kconfig
@@ -36,14 +36,14 @@ config VIDEO_DM6446_CCDC
depends on I2C
select VIDEOBUF_DMA_CONTIG
help
- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
- with decoder modules such as TVP5146 over BT656 or
- sensor module such as MT9T001 over a raw interface. This
- module configures the interface and CCDC/ISIF to do
- video frame capture from slave decoders.
+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from slave decoders.
- To compile this driver as a module, choose M here. There will
- be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko
+ To compile this driver as a module, choose M here. There will
+ be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko
config VIDEO_DM355_CCDC
tristate "TI DM355 CCDC video capture driver"
@@ -52,14 +52,14 @@ config VIDEO_DM355_CCDC
depends on I2C
select VIDEOBUF_DMA_CONTIG
help
- Enables DM355 CCD hw module. DM355 CCDC hw interfaces
- with decoder modules such as TVP5146 over BT656 or
- sensor module such as MT9T001 over a raw interface. This
- module configures the interface and CCDC/ISIF to do
- video frame capture from a slave decoders
+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from a slave decoders
- To compile this driver as a module, choose M here. There will
- be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko
+ To compile this driver as a module, choose M here. There will
+ be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko
config VIDEO_DM365_ISIF
tristate "TI DM365 ISIF video capture driver"
@@ -68,12 +68,12 @@ config VIDEO_DM365_ISIF
depends on I2C
select VIDEOBUF_DMA_CONTIG
help
- Enables ISIF hw module. This is the hardware module for
- configuring ISIF in VPFE to capture Raw Bayer RGB data from
- a image sensor or YUV data from a YUV source.
+ Enables ISIF hw module. This is the hardware module for
+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
+ a image sensor or YUV data from a YUV source.
- To compile this driver as a module, choose M here. There will
- be three modules called vpfe_capture.ko, vpss.ko and isif.ko
+ To compile this driver as a module, choose M here. There will
+ be three modules called vpfe_capture.ko, vpss.ko and isif.ko
config VIDEO_DAVINCI_VPBE_DISPLAY
tristate "TI DaVinci VPBE V4L2-Display driver"
@@ -82,10 +82,10 @@ config VIDEO_DAVINCI_VPBE_DISPLAY
depends on I2C
select VIDEOBUF2_DMA_CONTIG
help
- Enables Davinci VPBE module used for display devices.
- This module is used for display on TI DM644x/DM365/DM355
- based display devices.
+ Enables Davinci VPBE module used for display devices.
+ This module is used for display on TI DM644x/DM365/DM355
+ based display devices.
- To compile this driver as a module, choose M here. There will
- be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko,
- vpbe_venc.ko and vpbe_display.ko
+ To compile this driver as a module, choose M here. There will
+ be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko,
+ vpbe_venc.ko and vpbe_display.ko
diff --git a/drivers/media/platform/exynos4-is/Kconfig
b/drivers/media/platform/exynos4-is/Kconfig
index c8e5ad8..cf77a75 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -12,7 +12,7 @@ config VIDEO_SAMSUNG_EXYNOS4_IS
if VIDEO_SAMSUNG_EXYNOS4_IS
config VIDEO_EXYNOS4_IS_COMMON
- tristate
+ tristate
config VIDEO_S5P_FIMC
tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver"
diff --git a/drivers/media/platform/sunxi/sun6i-csi/Kconfig
b/drivers/media/platform/sunxi/sun6i-csi/Kconfig
index 018e3ec..a96298f 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/Kconfig
+++ b/drivers/media/platform/sunxi/sun6i-csi/Kconfig
@@ -6,4 +6,4 @@ config VIDEO_SUN6I_CSI
select REGMAP_MMIO
select V4L2_FWNODE
help
- Support for the Allwinner Camera Sensor Interface Controller on V3s.
+ Support for the Allwinner Camera Sensor Interface Controller on V3s.
diff --git a/drivers/media/platform/xilinx/Kconfig
b/drivers/media/platform/xilinx/Kconfig
index 74ec8aa..7143644 100644
--- a/drivers/media/platform/xilinx/Kconfig
+++ b/drivers/media/platform/xilinx/Kconfig
@@ -15,12 +15,12 @@ config VIDEO_XILINX_TPG
depends on VIDEO_XILINX
select VIDEO_XILINX_VTC
---help---
- Driver for the Xilinx Video Test Pattern Generator
+ Driver for the Xilinx Video Test Pattern Generator
config VIDEO_XILINX_VTC
tristate "Xilinx Video Timing Controller"
depends on VIDEO_XILINX
---help---
- Driver for the Xilinx Video Timing Controller
+ Driver for the Xilinx Video Timing Controller
endif #VIDEO_XILINX
diff --git a/drivers/media/radio/si470x/Kconfig
b/drivers/media/radio/si470x/Kconfig
index 6dbb158..a221e80 100644
--- a/drivers/media/radio/si470x/Kconfig
+++ b/drivers/media/radio/si470x/Kconfig
@@ -1,6 +1,6 @@
config RADIO_SI470X
- tristate "Silicon Labs Si470x FM Radio Receiver support"
- depends on VIDEO_V4L2
+ tristate "Silicon Labs Si470x FM Radio Receiver support"
+ depends on VIDEO_V4L2
---help---
This is a driver for devices with the Silicon Labs SI470x
chip (either via USB or I2C buses).
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 96ce3e5..a6a0b69 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -20,10 +20,10 @@ config LIRC
bool "LIRC user interface"
depends on RC_CORE
---help---
- Enable this option to enable the Linux Infrared Remote
- Control user interface (e.g. /dev/lirc*). This interface
- passes raw IR to and from userspace, which is needed for
- IR transmitting (aka "blasting") and for the lirc daemon.
+ Enable this option to enable the Linux Infrared Remote
+ Control user interface (e.g. /dev/lirc*). This interface
+ passes raw IR to and from userspace, which is needed for
+ IR transmitting (aka "blasting") and for the lirc daemon.
config BPF_LIRC_MODE2
bool "Support for eBPF programs attached to lirc devices"
@@ -31,12 +31,12 @@ config BPF_LIRC_MODE2
depends on RC_CORE=y
depends on LIRC
help
- Allow attaching eBPF programs to a lirc device using the bpf(2)
- syscall command BPF_PROG_ATTACH. This is supported for raw IR
- receivers.
+ Allow attaching eBPF programs to a lirc device using the bpf(2)
+ syscall command BPF_PROG_ATTACH. This is supported for raw IR
+ receivers.
- These eBPF programs can be used to decode IR into scancodes, for
- IR protocols not supported by the kernel decoders.
+ These eBPF programs can be used to decode IR into scancodes, for
+ IR protocols not supported by the kernel decoders.
menuconfig RC_DECODERS
bool "Remote controller decoders"
@@ -47,91 +47,82 @@ config IR_NEC_DECODER
tristate "Enable IR raw decoder for the NEC protocol"
depends on RC_CORE
select BITREVERSE
-
---help---
- Enable this option if you have IR with NEC protocol, and
- if the IR is decoded in software
+ Enable this option if you have IR with NEC protocol, and
+ if the IR is decoded in software
config IR_RC5_DECODER
tristate "Enable IR raw decoder for the RC-5 protocol"
depends on RC_CORE
select BITREVERSE
-
---help---
- Enable this option if you have IR with RC-5 protocol, and
- if the IR is decoded in software
+ Enable this option if you have IR with RC-5 protocol, and
+ if the IR is decoded in software
config IR_RC6_DECODER
tristate "Enable IR raw decoder for the RC6 protocol"
depends on RC_CORE
select BITREVERSE
-
---help---
- Enable this option if you have an infrared remote control which
- uses the RC6 protocol, and you need software decoding support.
+ Enable this option if you have an infrared remote control which
+ uses the RC6 protocol, and you need software decoding support.
config IR_JVC_DECODER
tristate "Enable IR raw decoder for the JVC protocol"
depends on RC_CORE
select BITREVERSE
-
---help---
- Enable this option if you have an infrared remote control which
- uses the JVC protocol, and you need software decoding support.
+ Enable this option if you have an infrared remote control which
+ uses the JVC protocol, and you need software decoding support.
config IR_SONY_DECODER
tristate "Enable IR raw decoder for the Sony protocol"
depends on RC_CORE
select BITREVERSE
-
---help---
- Enable this option if you have an infrared remote control which
- uses the Sony protocol, and you need software decoding support.
+ Enable this option if you have an infrared remote control which
+ uses the Sony protocol, and you need software decoding support.
config IR_SANYO_DECODER
tristate "Enable IR raw decoder for the Sanyo protocol"
depends on RC_CORE
-
---help---
- Enable this option if you have an infrared remote control which
- uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
- and you need software decoding support.
+ Enable this option if you have an infrared remote control which
+ uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
+ and you need software decoding support.
config IR_SHARP_DECODER
tristate "Enable IR raw decoder for the Sharp protocol"
depends on RC_CORE
-
---help---
- Enable this option if you have an infrared remote control which
- uses the Sharp protocol (Sharp, Denon), and you need software
- decoding support.
+ Enable this option if you have an infrared remote control which
+ uses the Sharp protocol (Sharp, Denon), and you need software
+ decoding support.
config IR_MCE_KBD_DECODER
tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
depends on RC_CORE
select BITREVERSE
-
---help---
- Enable this option if you have a Microsoft Remote Keyboard for
- Windows Media Center Edition, which you would like to use with
- a raw IR receiver in your system.
+ Enable this option if you have a Microsoft Remote Keyboard for
+ Windows Media Center Edition, which you would like to use with
+ a raw IR receiver in your system.
config IR_XMP_DECODER
tristate "Enable IR raw decoder for the XMP protocol"
depends on RC_CORE
select BITREVERSE
-
---help---
- Enable this option if you have IR with XMP protocol, and
- if the IR is decoded in software
+ Enable this option if you have IR with XMP protocol, and
+ if the IR is decoded in software
config IR_IMON_DECODER
tristate "Enable IR raw decoder for the iMON protocol"
depends on RC_CORE
---help---
- Enable this option if you have iMON PAD or Antec Veris infrared
- remote control and you would like to use it with a raw IR
- receiver, or if you wish to use an encoder to transmit this IR.
+ Enable this option if you have iMON PAD or Antec Veris infrared
+ remote control and you would like to use it with a raw IR
+ receiver, or if you wish to use an encoder to transmit this IR.
config IR_RCMM_DECODER
tristate "Enable IR raw decoder for the RC-MM protocol"
@@ -160,43 +151,43 @@ config RC_ATI_REMOTE
depends on RC_CORE
select USB
help
- Say Y here if you want to use an X10 based USB remote control.
- These are RF remotes with USB receivers.
+ Say Y here if you want to use an X10 based USB remote control.
+ These are RF remotes with USB receivers.
- Such devices include the ATI remote that comes with many of ATI's
- All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
- Medion RF remote, and SnapStream FireFly remote.
+ Such devices include the ATI remote that comes with many of ATI's
+ All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
+ Medion RF remote, and SnapStream FireFly remote.
- This driver provides mouse pointer, left and right mouse buttons,
- and maps all the other remote buttons to keypress events.
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
- To compile this driver as a module, choose M here: the module will be
- called ati_remote.
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote.
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP || COMPILE_TEST
depends on RC_CORE
---help---
- Say Y here to enable support for integrated infrared receiver
- /transceiver made by ENE.
+ Say Y here to enable support for integrated infrared receiver
+ /transceiver made by ENE.
- You can see if you have it by looking at lspnp output.
- Output should include ENE0100 ENE0200 or something similar.
+ You can see if you have it by looking at lspnp output.
+ Output should include ENE0100 ENE0200 or something similar.
- To compile this driver as a module, choose M here: the
- module will be called ene_ir.
+ To compile this driver as a module, choose M here: the
+ module will be called ene_ir.
config IR_HIX5HD2
tristate "Hisilicon hix5hd2 IR remote control"
depends on RC_CORE
depends on OF || COMPILE_TEST
help
- Say Y here if you want to use hisilicon hix5hd2 remote control.
- To compile this driver as a module, choose M here: the module will be
- called ir-hix5hd2.
+ Say Y here if you want to use hisilicon hix5hd2 remote control.
+ To compile this driver as a module, choose M here: the module will be
+ called ir-hix5hd2.
- If you're not sure, select N here
+ If you're not sure, select N here
config IR_IMON
tristate "SoundGraph iMON Receiver and Display"
@@ -204,11 +195,11 @@ config IR_IMON
depends on RC_CORE
select USB
---help---
- Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
- IR Receiver and/or LCD/VFD/VGA display.
+ Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
+ IR Receiver and/or LCD/VFD/VGA display.
- To compile this driver as a module, choose M here: the
- module will be called imon.
+ To compile this driver as a module, choose M here: the
+ module will be called imon.
config IR_IMON_RAW
tristate "SoundGraph iMON Receiver (early raw IR models)"
@@ -216,11 +207,11 @@ config IR_IMON_RAW
depends on RC_CORE
select USB
---help---
- Say Y here if you want to use a SoundGraph iMON IR Receiver,
- early raw models.
+ Say Y here if you want to use a SoundGraph iMON IR Receiver,
+ early raw models.
- To compile this driver as a module, choose M here: the
- module will be called imon_raw.
+ To compile this driver as a module, choose M here: the
+ module will be called imon_raw.
config IR_MCEUSB
tristate "Windows Media Center Ed. eHome Infrared Transceiver"
@@ -228,71 +219,71 @@ config IR_MCEUSB
depends on RC_CORE
select USB
---help---
- Say Y here if you want to use a Windows Media Center Edition
- eHome Infrared Transceiver.
+ Say Y here if you want to use a Windows Media Center Edition
+ eHome Infrared Transceiver.
- To compile this driver as a module, choose M here: the
- module will be called mceusb.
+ To compile this driver as a module, choose M here: the
+ module will be called mceusb.
config IR_ITE_CIR
tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
depends on RC_CORE
---help---
- Say Y here to enable support for integrated infrared receivers
- /transceivers made by ITE Tech Inc. These are found in
- several ASUS devices, like the ASUS Digimatrix or the ASUS
- EEEBox 1501U.
+ Say Y here to enable support for integrated infrared receivers
+ /transceivers made by ITE Tech Inc. These are found in
+ several ASUS devices, like the ASUS Digimatrix or the ASUS
+ EEEBox 1501U.
- To compile this driver as a module, choose M here: the
- module will be called ite-cir.
+ To compile this driver as a module, choose M here: the
+ module will be called ite-cir.
config IR_FINTEK
tristate "Fintek Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
depends on RC_CORE
---help---
- Say Y here to enable support for integrated infrared receiver
- /transceiver made by Fintek. This chip is found on assorted
- Jetway motherboards (and of course, possibly others).
+ Say Y here to enable support for integrated infrared receiver
+ /transceiver made by Fintek. This chip is found on assorted
+ Jetway motherboards (and of course, possibly others).
- To compile this driver as a module, choose M here: the
- module will be called fintek-cir.
+ To compile this driver as a module, choose M here: the
+ module will be called fintek-cir.
config IR_MESON
tristate "Amlogic Meson IR remote receiver"
depends on RC_CORE
depends on ARCH_MESON || COMPILE_TEST
---help---
- Say Y if you want to use the IR remote receiver available
- on Amlogic Meson SoCs.
+ Say Y if you want to use the IR remote receiver available
+ on Amlogic Meson SoCs.
- To compile this driver as a module, choose M here: the
- module will be called meson-ir.
+ To compile this driver as a module, choose M here: the
+ module will be called meson-ir.
config IR_MTK
tristate "Mediatek IR remote receiver"
depends on RC_CORE
depends on ARCH_MEDIATEK || COMPILE_TEST
---help---
- Say Y if you want to use the IR remote receiver available
- on Mediatek SoCs.
+ Say Y if you want to use the IR remote receiver available
+ on Mediatek SoCs.
- To compile this driver as a module, choose M here: the
- module will be called mtk-cir.
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-cir.
config IR_NUVOTON
tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
depends on RC_CORE
---help---
- Say Y here to enable support for integrated infrared receiver
- /transceiver made by Nuvoton (formerly Winbond). This chip is
- found in the ASRock ION 330HT, as well as assorted Intel
- DP55-series motherboards (and of course, possibly others).
+ Say Y here to enable support for integrated infrared receiver
+ /transceiver made by Nuvoton (formerly Winbond). This chip is
+ found in the ASRock ION 330HT, as well as assorted Intel
+ DP55-series motherboards (and of course, possibly others).
- To compile this driver as a module, choose M here: the
- module will be called nuvoton-cir.
+ To compile this driver as a module, choose M here: the
+ module will be called nuvoton-cir.
config IR_REDRAT3
tristate "RedRat3 IR Transceiver"
@@ -302,10 +293,10 @@ config IR_REDRAT3
select LEDS_CLASS
select USB
---help---
- Say Y here if you want to use a RedRat3 Infrared Transceiver.
+ Say Y here if you want to use a RedRat3 Infrared Transceiver.
- To compile this driver as a module, choose M here: the
- module will be called redrat3.
+ To compile this driver as a module, choose M here: the
+ module will be called redrat3.
config IR_SPI
tristate "SPI connected IR LED"
@@ -323,11 +314,11 @@ config IR_STREAMZAP
depends on RC_CORE
select USB
---help---
- Say Y here if you want to use a Streamzap PC Remote
- Infrared Receiver.
+ Say Y here if you want to use a Streamzap PC Remote
+ Infrared Receiver.
- To compile this driver as a module, choose M here: the
- module will be called streamzap.
+ To compile this driver as a module, choose M here: the
+ module will be called streamzap.
config IR_WINBOND_CIR
tristate "Winbond IR remote control"
@@ -337,13 +328,13 @@ config IR_WINBOND_CIR
select LEDS_CLASS
select BITREVERSE
---help---
- Say Y here if you want to use the IR remote functionality found
- in some Winbond SuperI/O chips. Currently only the WPCD376I
- chip is supported (included in some Intel Media series
- motherboards).
+ Say Y here if you want to use the IR remote functionality found
+ in some Winbond SuperI/O chips. Currently only the WPCD376I
+ chip is supported (included in some Intel Media series
+ motherboards).
- To compile this driver as a module, choose M here: the module will
- be called winbond_cir.
+ To compile this driver as a module, choose M here: the module will
+ be called winbond_cir.
config IR_IGORPLUGUSB
tristate "IgorPlug-USB IR Receiver"
@@ -351,14 +342,14 @@ config IR_IGORPLUGUSB
depends on RC_CORE
select USB
---help---
- Say Y here if you want to use the IgorPlug-USB IR Receiver by
- Igor Cesko. This device is included on the Fit-PC2.
+ Say Y here if you want to use the IgorPlug-USB IR Receiver by
+ Igor Cesko. This device is included on the Fit-PC2.
- Note that this device can only record bursts of 36 IR pulses and
- spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
+ Note that this device can only record bursts of 36 IR pulses and
+ spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
- To compile this driver as a module, choose M here: the module will
- be called igorplugusb.
+ To compile this driver as a module, choose M here: the module will
+ be called igorplugusb.
config IR_IGUANA
tristate "IguanaWorks USB IR Transceiver"
@@ -366,15 +357,15 @@ config IR_IGUANA
depends on RC_CORE
select USB
---help---
- Say Y here if you want to use the IguanaWorks USB IR Transceiver.
- Both infrared receive and send are supported. If you want to
- change the ID or the pin config, use the user space driver from
- IguanaWorks.
+ Say Y here if you want to use the IguanaWorks USB IR Transceiver.
+ Both infrared receive and send are supported. If you want to
+ change the ID or the pin config, use the user space driver from
+ IguanaWorks.
- Only firmware 0x0205 and later is supported.
+ Only firmware 0x0205 and later is supported.
- To compile this driver as a module, choose M here: the module will
- be called iguanair.
+ To compile this driver as a module, choose M here: the module will
+ be called iguanair.
config IR_TTUSBIR
tristate "TechnoTrend USB IR Receiver"
@@ -384,21 +375,21 @@ config IR_TTUSBIR
select NEW_LEDS
select LEDS_CLASS
---help---
- Say Y here if you want to use the TechnoTrend USB IR Receiver. The
- driver can control the led.
+ Say Y here if you want to use the TechnoTrend USB IR Receiver. The
+ driver can control the led.
- To compile this driver as a module, choose M here: the module will
- be called ttusbir.
+ To compile this driver as a module, choose M here: the module will
+ be called ttusbir.
config IR_RX51
tristate "Nokia N900 IR transmitter diode"
depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS ||
COMPILE_TEST) && RC_CORE
---help---
- Say Y or M here if you want to enable support for the IR
- transmitter diode built in the Nokia N900 (RX51) device.
+ Say Y or M here if you want to enable support for the IR
+ transmitter diode built in the Nokia N900 (RX51) device.
- The driver uses omap DM timers for generating the carrier
- wave and pulses.
+ The driver uses omap DM timers for generating the carrier
+ wave and pulses.
source "drivers/media/rc/img-ir/Kconfig"
@@ -406,24 +397,24 @@ config RC_LOOPBACK
tristate "Remote Control Loopback Driver"
depends on RC_CORE
---help---
- Say Y here if you want support for the remote control loopback
- driver which allows TX data to be sent back as RX data.
- This is mostly useful for debugging purposes.
+ Say Y here if you want support for the remote control loopback
+ driver which allows TX data to be sent back as RX data.
+ This is mostly useful for debugging purposes.
- If you're not sure, select N here.
+ If you're not sure, select N here.
- To compile this driver as a module, choose M here: the module will
- be called rc_loopback.
+ To compile this driver as a module, choose M here: the module will
+ be called rc_loopback.
config IR_GPIO_CIR
tristate "GPIO IR remote control"
depends on RC_CORE
depends on (OF && GPIOLIB) || COMPILE_TEST
---help---
- Say Y if you want to use GPIO based IR Receiver.
+ Say Y if you want to use GPIO based IR Receiver.
- To compile this driver as a module, choose M here: the module will
- be called gpio-ir-recv.
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-ir-recv.
config IR_GPIO_TX
tristate "GPIO IR Bit Banging Transmitter"
@@ -431,11 +422,11 @@ config IR_GPIO_TX
depends on LIRC
depends on (OF && GPIOLIB) || COMPILE_TEST
---help---
- Say Y if you want to a GPIO based IR transmitter. This is a
- bit banging driver.
+ Say Y if you want to a GPIO based IR transmitter. This is a
+ bit banging driver.
- To compile this driver as a module, choose M here: the module will
- be called gpio-ir-tx.
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-ir-tx.
config IR_PWM_TX
tristate "PWM IR transmitter"
@@ -444,67 +435,67 @@ config IR_PWM_TX
depends on PWM
depends on OF || COMPILE_TEST
---help---
- Say Y if you want to use a PWM based IR transmitter. This is
- more power efficient than the bit banging gpio driver.
+ Say Y if you want to use a PWM based IR transmitter. This is
+ more power efficient than the bit banging gpio driver.
- To compile this driver as a module, choose M here: the module will
- be called pwm-ir-tx.
+ To compile this driver as a module, choose M here: the module will
+ be called pwm-ir-tx.
config RC_ST
tristate "ST remote control receiver"
depends on RC_CORE
depends on ARCH_STI || COMPILE_TEST
---help---
- Say Y here if you want support for ST remote control driver
- which allows both IR and UHF RX.
- The driver passes raw pulse and space information to the LIRC
decoder.
+ Say Y here if you want support for ST remote control driver
+ which allows both IR and UHF RX.
+ The driver passes raw pulse and space information to the LIRC decoder.
- If you're not sure, select N here.
+ If you're not sure, select N here.
config IR_SUNXI
tristate "SUNXI IR remote control"
depends on RC_CORE
depends on ARCH_SUNXI || COMPILE_TEST
---help---
- Say Y if you want to use sunXi internal IR Controller
+ Say Y if you want to use sunXi internal IR Controller
- To compile this driver as a module, choose M here: the module will
- be called sunxi-ir.
+ To compile this driver as a module, choose M here: the module will
+ be called sunxi-ir.
config IR_SERIAL
tristate "Homebrew Serial Port Receiver"
depends on RC_CORE
---help---
- Say Y if you want to use Homebrew Serial Port Receivers and
- Transceivers.
+ Say Y if you want to use Homebrew Serial Port Receivers and
+ Transceivers.
- To compile this driver as a module, choose M here: the module will
- be called serial-ir.
+ To compile this driver as a module, choose M here: the module will
+ be called serial-ir.
config IR_SERIAL_TRANSMITTER
bool "Serial Port Transmitter"
depends on IR_SERIAL
---help---
- Serial Port Transmitter support
+ Serial Port Transmitter support
config IR_SIR
tristate "Built-in SIR IrDA port"
depends on RC_CORE
---help---
- Say Y if you want to use a IrDA SIR port Transceivers.
+ Say Y if you want to use a IrDA SIR port Transceivers.
- To compile this driver as a module, choose M here: the module will
- be called sir-ir.
+ To compile this driver as a module, choose M here: the module will
+ be called sir-ir.
config IR_TANGO
tristate "Sigma Designs SMP86xx IR decoder"
depends on RC_CORE
depends on ARCH_TANGO || COMPILE_TEST
---help---
- Adds support for the HW IR decoder embedded on Sigma Designs
- Tango-based systems (SMP86xx, SMP87xx).
- The HW decoder supports NEC, RC-5, RC-6 IR protocols.
- When compiled as a module, look for tango-ir.
+ Adds support for the HW IR decoder embedded on Sigma Designs
+ Tango-based systems (SMP86xx, SMP87xx).
+ The HW decoder supports NEC, RC-5, RC-6 IR protocols.
+ When compiled as a module, look for tango-ir.
config RC_XBOX_DVD
tristate "Xbox DVD Movie Playback Kit"
@@ -512,22 +503,22 @@ config RC_XBOX_DVD
depends on USB_ARCH_HAS_HCD
select USB
help
- Say Y here if you want to use the Xbox DVD Movie Playback Kit.
- These are IR remotes with USB receivers for the Original Xbox (2001).
+ Say Y here if you want to use the Xbox DVD Movie Playback Kit.
+ These are IR remotes with USB receivers for the Original Xbox (2001).
- To compile this driver as a module, choose M here: the module will be
- called xbox_remote.
+ To compile this driver as a module, choose M here: the module will be
+ called xbox_remote.
config IR_ZX
tristate "ZTE ZX IR remote control"
depends on RC_CORE
depends on ARCH_ZX || COMPILE_TEST
---help---
- Say Y if you want to use the IR remote control available
- on ZTE ZX family SoCs.
+ Say Y if you want to use the IR remote control available
+ on ZTE ZX family SoCs.
- To compile this driver as a module, choose M here: the
- module will be called zx-irdec.
+ To compile this driver as a module, choose M here: the
+ module will be called zx-irdec.
endif #RC_DEVICES
diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig
index d2c6617..102b089 100644
--- a/drivers/media/rc/img-ir/Kconfig
+++ b/drivers/media/rc/img-ir/Kconfig
@@ -4,74 +4,74 @@ config IR_IMG
depends on MIPS || COMPILE_TEST
select IR_IMG_HW if !IR_IMG_RAW
help
- Say Y or M here if you want to use the ImgTec infrared decoder
- functionality found in SoCs such as TZ1090.
+ Say Y or M here if you want to use the ImgTec infrared decoder
+ functionality found in SoCs such as TZ1090.
config IR_IMG_RAW
bool "Raw decoder"
depends on IR_IMG
help
- Say Y here to enable the raw mode driver which passes raw IR signal
- changes to the IR raw decoders for software decoding. This is much
- less reliable (due to lack of timestamps) and consumes more
- processing power than using hardware decode, but can be useful for
- testing, debug, and to make more protocols available.
+ Say Y here to enable the raw mode driver which passes raw IR signal
+ changes to the IR raw decoders for software decoding. This is much
+ less reliable (due to lack of timestamps) and consumes more
+ processing power than using hardware decode, but can be useful for
+ testing, debug, and to make more protocols available.
config IR_IMG_HW
bool "Hardware decoder"
depends on IR_IMG
help
- Say Y here to enable the hardware decode driver which decodes the IR
- signals in hardware. This is more reliable, consumes less processing
- power since only a single interrupt is received for each scancode,
- and allows an IR scancode to be used as a wake event.
+ Say Y here to enable the hardware decode driver which decodes the IR
+ signals in hardware. This is more reliable, consumes less processing
+ power since only a single interrupt is received for each scancode,
+ and allows an IR scancode to be used as a wake event.
config IR_IMG_NEC
bool "NEC protocol support"
depends on IR_IMG_HW
help
- Say Y here to enable support for the NEC, extended NEC, and 32-bit
- NEC protocols in the ImgTec infrared decoder block.
+ Say Y here to enable support for the NEC, extended NEC, and 32-bit
+ NEC protocols in the ImgTec infrared decoder block.
config IR_IMG_JVC
bool "JVC protocol support"
depends on IR_IMG_HW
help
- Say Y here to enable support for the JVC protocol in the ImgTec
- infrared decoder block.
+ Say Y here to enable support for the JVC protocol in the ImgTec
+ infrared decoder block.
config IR_IMG_SONY
bool "Sony protocol support"
depends on IR_IMG_HW
help
- Say Y here to enable support for the Sony protocol in the ImgTec
- infrared decoder block.
+ Say Y here to enable support for the Sony protocol in the ImgTec
+ infrared decoder block.
config IR_IMG_SHARP
bool "Sharp protocol support"
depends on IR_IMG_HW
help
- Say Y here to enable support for the Sharp protocol in the ImgTec
- infrared decoder block.
+ Say Y here to enable support for the Sharp protocol in the ImgTec
+ infrared decoder block.
config IR_IMG_SANYO
bool "Sanyo protocol support"
depends on IR_IMG_HW
help
- Say Y here to enable support for the Sanyo protocol (used by Sanyo,
- Aiwa, Chinon remotes) in the ImgTec infrared decoder block.
+ Say Y here to enable support for the Sanyo protocol (used by Sanyo,
+ Aiwa, Chinon remotes) in the ImgTec infrared decoder block.
config IR_IMG_RC5
bool "Philips RC5 protocol support"
depends on IR_IMG_HW
help
- Say Y here to enable support for the RC5 protocol in the ImgTec
- infrared decoder block.
+ Say Y here to enable support for the RC5 protocol in the ImgTec
+ infrared decoder block.
config IR_IMG_RC6
bool "Philips RC6 protocol support"
depends on IR_IMG_HW
help
- Say Y here to enable support for the RC6 protocol in the ImgTec
- infrared decoder block.
- Note: This version only supports mode 0.
+ Say Y here to enable support for the RC6 protocol in the ImgTec
+ infrared decoder block.
+ Note: This version only supports mode 0.
--
1.9.1
