Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <i...@metux.net>
---
net/Kconfig | 14 +--
net/batman-adv/Kconfig | 10 +-
net/bluetooth/Kconfig | 2 +-
net/ife/Kconfig | 2 +-
net/ipv4/Kconfig | 231 ++++++++++++++++++++++----------------------
net/ipv4/netfilter/Kconfig | 4 +-
net/ipv6/netfilter/Kconfig | 26 ++---
net/mpls/Kconfig | 10 +-
net/netfilter/Kconfig | 10 +-
net/netfilter/ipset/Kconfig | 2 +-
net/netfilter/ipvs/Kconfig | 68 ++++++-------
net/nfc/hci/Kconfig | 14 +--
net/rds/Kconfig | 4 +-
net/sched/Kconfig | 130 ++++++++++++-------------
net/wireless/Kconfig | 38 ++++----
net/xfrm/Kconfig | 10 +-
16 files changed, 287 insertions(+), 288 deletions(-)
diff --git a/net/Kconfig b/net/Kconfig
index 1efe1f9..617892c 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -259,7 +259,7 @@ config XPS
default y
config HWBM
- bool
+ bool
config CGROUP_NET_PRIO
bool "Network priority cgroup"
@@ -310,12 +310,12 @@ config BPF_STREAM_PARSER
select STREAM_PARSER
select NET_SOCK_MSG
---help---
- Enabling this allows a stream parser to be used with
- BPF_MAP_TYPE_SOCKMAP.
+ Enabling this allows a stream parser to be used with
+ BPF_MAP_TYPE_SOCKMAP.
- BPF_MAP_TYPE_SOCKMAP provides a map type to use with network sockets.
- It can be used to enforce socket policy, implement socket redirects,
- etc.
+ BPF_MAP_TYPE_SOCKMAP provides a map type to use with network sockets.
+ It can be used to enforce socket policy, implement socket redirects,
+ etc.
config NET_FLOW_LIMIT
bool
@@ -436,7 +436,7 @@ config NET_DEVLINK
monitoring.
config PAGE_POOL
- bool
+ bool
config FAILOVER
tristate "Generic failover module"
diff --git a/net/batman-adv/Kconfig b/net/batman-adv/Kconfig
index a31db5e..377d400 100644
--- a/net/batman-adv/Kconfig
+++ b/net/batman-adv/Kconfig
@@ -24,11 +24,11 @@ config BATMAN_ADV
depends on NET
select LIBCRC32C
help
- B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
- a routing protocol for multi-hop ad-hoc mesh networks. The
- networks may be wired or wireless. See
- https://www.open-mesh.org/ for more information and user space
- tools.
+ B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
+ a routing protocol for multi-hop ad-hoc mesh networks. The
+ networks may be wired or wireless. See
+ https://www.open-mesh.org/ for more information and user space
+ tools.
config BATMAN_ADV_BATMAN_V
bool "B.A.T.M.A.N. V protocol"
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index db82a40..855a9c7 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -28,7 +28,7 @@ menuconfig BT
L2CAP (Logical Link Control and Adaptation Protocol)
SMP (Security Manager Protocol) on LE (Low Energy) links
HCI Device drivers (Interface to the hardware)
- RFCOMM Module (RFCOMM Protocol)
+ RFCOMM Module (RFCOMM Protocol)
BNEP Module (Bluetooth Network Encapsulation Protocol)
CMTP Module (CAPI Message Transport Protocol)
HIDP Module (Human Interface Device Protocol)
diff --git a/net/ife/Kconfig b/net/ife/Kconfig
index 31e48b6..a0eb392 100644
--- a/net/ife/Kconfig
+++ b/net/ife/Kconfig
@@ -4,7 +4,7 @@
menuconfig NET_IFE
depends on NET
- tristate "Inter-FE based on IETF ForCES InterFE LFB"
+ tristate "Inter-FE based on IETF ForCES InterFE LFB"
default n
help
Say Y here to add support of IFE encapsulation protocol
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 32cae39..eafedbe 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -179,8 +179,8 @@ config NET_IPIP
config NET_IPGRE_DEMUX
tristate "IP: GRE demultiplexer"
help
- This is helper module to demultiplex GRE packets on GRE version field
criteria.
- Required by ip_gre and pptp modules.
+ This is helper module to demultiplex GRE packets on GRE version field
criteria.
+ Required by ip_gre and pptp modules.
config NET_IP_TUNNEL
tristate
@@ -485,200 +485,199 @@ config TCP_CONG_BIC
tristate "Binary Increase Congestion (BIC) control"
default m
---help---
- BIC-TCP is a sender-side only change that ensures a linear RTT
- fairness under large windows while offering both scalability and
- bounded TCP-friendliness. The protocol combines two schemes
- called additive increase and binary search increase. When the
- congestion window is large, additive increase with a large
- increment ensures linear RTT fairness as well as good
- scalability. Under small congestion windows, binary search
- increase provides TCP friendliness.
- See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/
+ BIC-TCP is a sender-side only change that ensures a linear RTT
+ fairness under large windows while offering both scalability and
+ bounded TCP-friendliness. The protocol combines two schemes
+ called additive increase and binary search increase. When the
+ congestion window is large, additive increase with a large
+ increment ensures linear RTT fairness as well as good
+ scalability. Under small congestion windows, binary search
+ increase provides TCP friendliness.
+ See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/
config TCP_CONG_CUBIC
tristate "CUBIC TCP"
default y
---help---
- This is version 2.0 of BIC-TCP which uses a cubic growth function
- among other techniques.
- See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf
+ This is version 2.0 of BIC-TCP which uses a cubic growth function
+ among other techniques.
+ See http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf
config TCP_CONG_WESTWOOD
tristate "TCP Westwood+"
default m
---help---
- TCP Westwood+ is a sender-side only modification of the TCP Reno
- protocol stack that optimizes the performance of TCP congestion
- control. It is based on end-to-end bandwidth estimation to set
- congestion window and slow start threshold after a congestion
- episode. Using this estimation, TCP Westwood+ adaptively sets a
- slow start threshold and a congestion window which takes into
- account the bandwidth used at the time congestion is experienced.
- TCP Westwood+ significantly increases fairness wrt TCP Reno in
- wired networks and throughput over wireless links.
+ TCP Westwood+ is a sender-side only modification of the TCP Reno
+ protocol stack that optimizes the performance of TCP congestion
+ control. It is based on end-to-end bandwidth estimation to set
+ congestion window and slow start threshold after a congestion
+ episode. Using this estimation, TCP Westwood+ adaptively sets a
+ slow start threshold and a congestion window which takes into
+ account the bandwidth used at the time congestion is experienced.
+ TCP Westwood+ significantly increases fairness wrt TCP Reno in
+ wired networks and throughput over wireless links.
config TCP_CONG_HTCP
- tristate "H-TCP"
- default m
+ tristate "H-TCP"
+ default m
---help---
- H-TCP is a send-side only modifications of the TCP Reno
- protocol stack that optimizes the performance of TCP
- congestion control for high speed network links. It uses a
- modeswitch to change the alpha and beta parameters of TCP Reno
- based on network conditions and in a way so as to be fair with
- other Reno and H-TCP flows.
+ H-TCP is a send-side only modifications of the TCP Reno
+ protocol stack that optimizes the performance of TCP
+ congestion control for high speed network links. It uses a
+ modeswitch to change the alpha and beta parameters of TCP Reno
+ based on network conditions and in a way so as to be fair with
+ other Reno and H-TCP flows.
config TCP_CONG_HSTCP
tristate "High Speed TCP"
default n
---help---
- Sally Floyd's High Speed TCP (RFC 3649) congestion control.
- A modification to TCP's congestion control mechanism for use
- with large congestion windows. A table indicates how much to
- increase the congestion window by when an ACK is received.
- For more detail see http://www.icir.org/floyd/hstcp.html
+ Sally Floyd's High Speed TCP (RFC 3649) congestion control.
+ A modification to TCP's congestion control mechanism for use
+ with large congestion windows. A table indicates how much to
+ increase the congestion window by when an ACK is received.
+ For more detail see http://www.icir.org/floyd/hstcp.html
config TCP_CONG_HYBLA
tristate "TCP-Hybla congestion control algorithm"
default n
---help---
- TCP-Hybla is a sender-side only change that eliminates penalization of
- long-RTT, large-bandwidth connections, like when satellite legs are
- involved, especially when sharing a common bottleneck with normal
- terrestrial connections.
+ TCP-Hybla is a sender-side only change that eliminates penalization of
+ long-RTT, large-bandwidth connections, like when satellite legs are
+ involved, especially when sharing a common bottleneck with normal
+ terrestrial connections.
config TCP_CONG_VEGAS
tristate "TCP Vegas"
default n
---help---
- TCP Vegas is a sender-side only change to TCP that anticipates
- the onset of congestion by estimating the bandwidth. TCP Vegas
- adjusts the sending rate by modifying the congestion
- window. TCP Vegas should provide less packet loss, but it is
- not as aggressive as TCP Reno.
+ TCP Vegas is a sender-side only change to TCP that anticipates
+ the onset of congestion by estimating the bandwidth. TCP Vegas
+ adjusts the sending rate by modifying the congestion
+ window. TCP Vegas should provide less packet loss, but it is
+ not as aggressive as TCP Reno.
config TCP_CONG_NV
- tristate "TCP NV"
- default n
- ---help---
- TCP NV is a follow up to TCP Vegas. It has been modified to deal with
- 10G networks, measurement noise introduced by LRO, GRO and interrupt
- coalescence. In addition, it will decrease its cwnd multiplicatively
- instead of linearly.
+ tristate "TCP NV"
+ default n
+ ---help---
+ TCP NV is a follow up to TCP Vegas. It has been modified to deal with
+ 10G networks, measurement noise introduced by LRO, GRO and interrupt
+ coalescence. In addition, it will decrease its cwnd multiplicatively
+ instead of linearly.
- Note that in general congestion avoidance (cwnd decreased when # packets
- queued grows) cannot coexist with congestion control (cwnd decreased
only
- when there is packet loss) due to fairness issues. One scenario when
they
- can coexist safely is when the CA flows have RTTs << CC flows RTTs.
+ Note that in general congestion avoidance (cwnd decreased when #
packets
+ queued grows) cannot coexist with congestion control (cwnd decreased
only
+ when there is packet loss) due to fairness issues. One scenario when
they
+ can coexist safely is when the CA flows have RTTs << CC flows RTTs.
- For further details see http://www.brakmo.org/networking/tcp-nv/
+ For further details see http://www.brakmo.org/networking/tcp-nv/
config TCP_CONG_SCALABLE
tristate "Scalable TCP"
default n
---help---
- Scalable TCP is a sender-side only change to TCP which uses a
- MIMD congestion control algorithm which has some nice scaling
- properties, though is known to have fairness issues.
- See http://www.deneholme.net/tom/scalable/
+ Scalable TCP is a sender-side only change to TCP which uses a
+ MIMD congestion control algorithm which has some nice scaling
+ properties, though is known to have fairness issues.
+ See http://www.deneholme.net/tom/scalable/
config TCP_CONG_LP
tristate "TCP Low Priority"
default n
---help---
- TCP Low Priority (TCP-LP), a distributed algorithm whose goal is
- to utilize only the excess network bandwidth as compared to the
- ``fair share`` of bandwidth as targeted by TCP.
- See http://www-ece.rice.edu/networks/TCP-LP/
+ TCP Low Priority (TCP-LP), a distributed algorithm whose goal is
+ to utilize only the excess network bandwidth as compared to the
+ ``fair share`` of bandwidth as targeted by TCP.
+ See http://www-ece.rice.edu/networks/TCP-LP/
config TCP_CONG_VENO
tristate "TCP Veno"
default n
---help---
- TCP Veno is a sender-side only enhancement of TCP to obtain better
- throughput over wireless networks. TCP Veno makes use of state
- distinguishing to circumvent the difficult judgment of the packet loss
- type. TCP Veno cuts down less congestion window in response to random
- loss packets.
- See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
+ TCP Veno is a sender-side only enhancement of TCP to obtain better
+ throughput over wireless networks. TCP Veno makes use of state
+ distinguishing to circumvent the difficult judgment of the packet loss
+ type. TCP Veno cuts down less congestion window in response to random
+ loss packets.
+ See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
config TCP_CONG_YEAH
tristate "YeAH TCP"
select TCP_CONG_VEGAS
default n
---help---
- YeAH-TCP is a sender-side high-speed enabled TCP congestion control
- algorithm, which uses a mixed loss/delay approach to compute the
- congestion window. It's design goals target high efficiency,
- internal, RTT and Reno fairness, resilience to link loss while
- keeping network elements load as low as possible.
+ YeAH-TCP is a sender-side high-speed enabled TCP congestion control
+ algorithm, which uses a mixed loss/delay approach to compute the
+ congestion window. It's design goals target high efficiency,
+ internal, RTT and Reno fairness, resilience to link loss while
+ keeping network elements load as low as possible.
- For further details look here:
- http://wil.cs.caltech.edu/pfldnet2007/paper/YeAH_TCP.pdf
+ For further details look here:
+ http://wil.cs.caltech.edu/pfldnet2007/paper/YeAH_TCP.pdf
config TCP_CONG_ILLINOIS
tristate "TCP Illinois"
default n
---help---
- TCP-Illinois is a sender-side modification of TCP Reno for
- high speed long delay links. It uses round-trip-time to
- adjust the alpha and beta parameters to achieve a higher average
- throughput and maintain fairness.
+ TCP-Illinois is a sender-side modification of TCP Reno for
+ high speed long delay links. It uses round-trip-time to
+ adjust the alpha and beta parameters to achieve a higher average
+ throughput and maintain fairness.
- For further details see:
- http://www.ews.uiuc.edu/~shaoliu/tcpillinois/index.html
+ For further details see:
+ http://www.ews.uiuc.edu/~shaoliu/tcpillinois/index.html
config TCP_CONG_DCTCP
tristate "DataCenter TCP (DCTCP)"
default n
---help---
- DCTCP leverages Explicit Congestion Notification (ECN) in the network to
- provide multi-bit feedback to the end hosts. It is designed to provide:
+ DCTCP leverages Explicit Congestion Notification (ECN) in the network
to
+ provide multi-bit feedback to the end hosts. It is designed to
provide:
- - High burst tolerance (incast due to partition/aggregate),
- - Low latency (short flows, queries),
- - High throughput (continuous data updates, large file transfers) with
- commodity, shallow-buffered switches.
+ - High burst tolerance (incast due to partition/aggregate),
+ - Low latency (short flows, queries),
+ - High throughput (continuous data updates, large file transfers) with
+ commodity, shallow-buffered switches.
- All switches in the data center network running DCTCP must support
- ECN marking and be configured for marking when reaching defined switch
- buffer thresholds. The default ECN marking threshold heuristic for
- DCTCP on switches is 20 packets (30KB) at 1Gbps, and 65 packets
- (~100KB) at 10Gbps, but might need further careful tweaking.
+ All switches in the data center network running DCTCP must support
+ ECN marking and be configured for marking when reaching defined switch
+ buffer thresholds. The default ECN marking threshold heuristic for
+ DCTCP on switches is 20 packets (30KB) at 1Gbps, and 65 packets
+ (~100KB) at 10Gbps, but might need further careful tweaking.
- For further details see:
- http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp-final.pdf
+ For further details see:
+ http://simula.stanford.edu/~alizade/Site/DCTCP_files/dctcp-final.pdf
config TCP_CONG_CDG
tristate "CAIA Delay-Gradient (CDG)"
default n
---help---
- CAIA Delay-Gradient (CDG) is a TCP congestion control that modifies
- the TCP sender in order to:
+ CAIA Delay-Gradient (CDG) is a TCP congestion control that modifies
+ the TCP sender in order to:
- o Use the delay gradient as a congestion signal.
- o Back off with an average probability that is independent of the RTT.
- o Coexist with flows that use loss-based congestion control.
- o Tolerate packet loss unrelated to congestion.
+ o Use the delay gradient as a congestion signal.
+ o Back off with an average probability that is independent of the
RTT.
+ o Coexist with flows that use loss-based congestion control.
+ o Tolerate packet loss unrelated to congestion.
- For further details see:
- D.A. Hayes and G. Armitage. "Revisiting TCP congestion control using
- delay gradients." In Networking 2011. Preprint: http://goo.gl/No3vdg
+ For further details see:
+ D.A. Hayes and G. Armitage. "Revisiting TCP congestion control using
+ delay gradients." In Networking 2011. Preprint: http://goo.gl/No3vdg
config TCP_CONG_BBR
tristate "BBR TCP"
default n
---help---
-
- BBR (Bottleneck Bandwidth and RTT) TCP congestion control aims to
- maximize network utilization and minimize queues. It builds an explicit
- model of the the bottleneck delivery rate and path round-trip
- propagation delay. It tolerates packet loss and delay unrelated to
- congestion. It can operate over LAN, WAN, cellular, wifi, or cable
- modem links. It can coexist with flows that use loss-based congestion
- control, and can operate with shallow buffers, deep buffers,
- bufferbloat, policers, or AQM schemes that do not provide a delay
- signal. It requires the fq ("Fair Queue") pacing packet scheduler.
+ BBR (Bottleneck Bandwidth and RTT) TCP congestion control aims to
+ maximize network utilization and minimize queues. It builds an
explicit
+ model of the the bottleneck delivery rate and path round-trip
+ propagation delay. It tolerates packet loss and delay unrelated to
+ congestion. It can operate over LAN, WAN, cellular, wifi, or cable
+ modem links. It can coexist with flows that use loss-based congestion
+ control, and can operate with shallow buffers, deep buffers,
+ bufferbloat, policers, or AQM schemes that do not provide a delay
+ signal. It requires the fq ("Fair Queue") pacing packet scheduler.
choice
prompt "Default TCP congestion control"
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index c98391d..8d0fdfa 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -294,7 +294,7 @@ config IP_NF_TARGET_ECN
depends on NETFILTER_ADVANCED
---help---
This option adds a `ECN' target, which can be used in the iptables
mangle
- table.
+ table.
You can use this target to remove the ECN bits from the IPv4 header of
an IP packet. This is particularly useful, if you need to work around
@@ -331,7 +331,7 @@ config IP_NF_SECURITY
help
This option adds a `security' table to iptables, for use
with Mandatory Access Control (MAC) policy.
-
+
If unsure, say N.
endif # IP_NF_IPTABLES
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index ddc99a1..fea22c2 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -177,13 +177,13 @@ config IP6_NF_MATCH_RT
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_SRH
- tristate '"srh" Segment Routing header match support'
- depends on NETFILTER_ADVANCED
- help
- srh matching allows you to match packets based on the segment
+ tristate '"srh" Segment Routing header match support'
+ depends on NETFILTER_ADVANCED
+ help
+ srh matching allows you to match packets based on the segment
routing header of the packet.
- To compile it as a module, choose M here. If unsure, say N.
+ To compile it as a module, choose M here. If unsure, say N.
# The targets
config IP6_NF_TARGET_HL
@@ -252,14 +252,14 @@ config IP6_NF_RAW
# security table for MAC policy
config IP6_NF_SECURITY
- tristate "Security table"
- depends on SECURITY
- depends on NETFILTER_ADVANCED
- help
- This option adds a `security' table to iptables, for use
- with Mandatory Access Control (MAC) policy.
-
- If unsure, say N.
+ tristate "Security table"
+ depends on SECURITY
+ depends on NETFILTER_ADVANCED
+ help
+ This option adds a `security' table to iptables, for use
+ with Mandatory Access Control (MAC) policy.
+
+ If unsure, say N.
config IP6_NF_NAT
tristate "ip6tables NAT support"
diff --git a/net/mpls/Kconfig b/net/mpls/Kconfig
index 801ea90..683d838 100644
--- a/net/mpls/Kconfig
+++ b/net/mpls/Kconfig
@@ -18,20 +18,20 @@ if MPLS
config NET_MPLS_GSO
tristate "MPLS: GSO support"
help
- This is helper module to allow segmentation of non-MPLS GSO packets
- that have had MPLS stack entries pushed onto them and thus
- become MPLS GSO packets.
+ This is helper module to allow segmentation of non-MPLS GSO packets
+ that have had MPLS stack entries pushed onto them and thus
+ become MPLS GSO packets.
config MPLS_ROUTING
tristate "MPLS: routing support"
depends on NET_IP_TUNNEL || NET_IP_TUNNEL=n
---help---
- Add support for forwarding of mpls packets.
+ Add support for forwarding of mpls packets.
config MPLS_IPTUNNEL
tristate "MPLS: IP over MPLS tunnel support"
depends on LWTUNNEL && MPLS_ROUTING
---help---
- mpls ip tunnel support.
+ mpls ip tunnel support.
endif # MPLS
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index d43ffb0..1be1ebd 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -33,7 +33,7 @@ config NETFILTER_NETLINK_QUEUE
help
If this option is enabled, the kernel will include support
for queueing packets via NFNETLINK.
-
+
config NETFILTER_NETLINK_LOG
tristate "Netfilter LOG over NFNETLINK interface"
default m if NETFILTER_ADVANCED=n
@@ -692,7 +692,7 @@ config NF_FLOW_TABLE_INET
tristate "Netfilter flow table mixed IPv4/IPv6 module"
depends on NF_FLOW_TABLE
help
- This option adds the flow table mixed IPv4/IPv6 support.
+ This option adds the flow table mixed IPv4/IPv6 support.
To compile it as a module, choose M here.
@@ -793,7 +793,7 @@ config NETFILTER_XT_TARGET_CLASSIFY
the priority of a packet. Some qdiscs can use this value for
classification, among these are:
- atm, cbq, dsmark, pfifo_fast, htb, prio
+ atm, cbq, dsmark, pfifo_fast, htb, prio
To compile it as a module, choose M here. If unsure, say N.
@@ -1482,7 +1482,7 @@ config NETFILTER_XT_MATCH_REALM
This option adds a `realm' match, which allows you to use the realm
key from the routing subsystem inside iptables.
- This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option
+ This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option
in tc world.
If you want to compile it as a module, say M here and read
@@ -1503,7 +1503,7 @@ config NETFILTER_XT_MATCH_SCTP
depends on NETFILTER_ADVANCED
default IP_SCTP
help
- With this option enabled, you will be able to use the
+ With this option enabled, you will be able to use the
`sctp' match in order to match on SCTP source/destination ports
and SCTP chunk types.
diff --git a/net/netfilter/ipset/Kconfig b/net/netfilter/ipset/Kconfig
index 4083a80..08b0e73 100644
--- a/net/netfilter/ipset/Kconfig
+++ b/net/netfilter/ipset/Kconfig
@@ -18,7 +18,7 @@ config IP_SET_MAX
range 2 65534
depends on IP_SET
help
- You can define here default value of the maximum number
+ You can define here default value of the maximum number
of IP sets for the kernel.
The value can be overridden by the 'max_sets' module
diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index 8401cef..f9edaf3 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -25,7 +25,7 @@ menuconfig IP_VS
if IP_VS
-config IP_VS_IPV6
+config IP_VS_IPV6
bool "IPv6 support for IPVS"
depends on IPV6 = y || IP_VS = IPV6
select IP6_NF_IPTABLES
@@ -35,14 +35,14 @@ config IP_VS_IPV6
Say Y if unsure.
-config IP_VS_DEBUG
+config IP_VS_DEBUG
bool "IP virtual server debugging"
---help---
Say Y here if you want to get additional messages useful in
debugging the IP virtual server code. You can change the debug
level in /proc/sys/net/ipv4/vs/debug_level
-config IP_VS_TAB_BITS
+config IP_VS_TAB_BITS
int "IPVS connection table size (the Nth power of 2)"
range 8 20
default 12
@@ -75,34 +75,34 @@ config IP_VS_TAB_BITS
comment "IPVS transport protocol load balancing support"
-config IP_VS_PROTO_TCP
+config IP_VS_PROTO_TCP
bool "TCP load balancing support"
---help---
This option enables support for load balancing TCP transport
protocol. Say Y if unsure.
-config IP_VS_PROTO_UDP
+config IP_VS_PROTO_UDP
bool "UDP load balancing support"
---help---
This option enables support for load balancing UDP transport
protocol. Say Y if unsure.
-config IP_VS_PROTO_AH_ESP
+config IP_VS_PROTO_AH_ESP
def_bool IP_VS_PROTO_ESP || IP_VS_PROTO_AH
-config IP_VS_PROTO_ESP
+config IP_VS_PROTO_ESP
bool "ESP load balancing support"
---help---
This option enables support for load balancing ESP (Encapsulation
Security Payload) transport protocol. Say Y if unsure.
-config IP_VS_PROTO_AH
+config IP_VS_PROTO_AH
bool "AH load balancing support"
---help---
This option enables support for load balancing AH (Authentication
Header) transport protocol. Say Y if unsure.
-config IP_VS_PROTO_SCTP
+config IP_VS_PROTO_SCTP
bool "SCTP load balancing support"
select LIBCRC32C
---help---
@@ -111,7 +111,7 @@ config IP_VS_PROTO_SCTP
comment "IPVS scheduler"
-config IP_VS_RR
+config IP_VS_RR
tristate "round-robin scheduling"
---help---
The robin-robin scheduling algorithm simply directs network
@@ -119,8 +119,8 @@ config IP_VS_RR
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-
-config IP_VS_WRR
+
+config IP_VS_WRR
tristate "weighted round-robin scheduling"
---help---
The weighted robin-robin scheduling algorithm directs network
@@ -133,18 +133,18 @@ config IP_VS_WRR
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_LC
- tristate "least-connection scheduling"
+config IP_VS_LC
+ tristate "least-connection scheduling"
---help---
The least-connection scheduling algorithm directs network
- connections to the server with the least number of active
+ connections to the server with the least number of active
connections.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_WLC
- tristate "weighted least-connection scheduling"
+config IP_VS_WLC
+ tristate "weighted least-connection scheduling"
---help---
The weighted least-connection scheduling algorithm directs network
connections to the server with the least active connections
@@ -153,7 +153,7 @@ config IP_VS_WLC
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_FO
+config IP_VS_FO
tristate "weighted failover scheduling"
---help---
The weighted failover scheduling algorithm directs network
@@ -163,7 +163,7 @@ config IP_VS_FO
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_OVF
+config IP_VS_OVF
tristate "weighted overflow scheduling"
---help---
The weighted overflow scheduling algorithm directs network
@@ -174,7 +174,7 @@ config IP_VS_OVF
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_LBLC
+config IP_VS_LBLC
tristate "locality-based least-connection scheduling"
---help---
The locality-based least-connection scheduling algorithm is for
@@ -188,11 +188,11 @@ config IP_VS_LBLC
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_LBLCR
+config IP_VS_LBLCR
tristate "locality-based least-connection with replication scheduling"
---help---
The locality-based least-connection with replication scheduling
- algorithm is also for destination IP load balancing. It is
+ algorithm is also for destination IP load balancing. It is
usually used in cache cluster. It differs from the LBLC scheduling
as follows: the load balancer maintains mappings from a target
to a set of server nodes that can serve the target. Requests for
@@ -206,7 +206,7 @@ config IP_VS_LBLCR
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_DH
+config IP_VS_DH
tristate "destination hashing scheduling"
---help---
The destination hashing scheduling algorithm assigns network
@@ -216,7 +216,7 @@ config IP_VS_DH
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_SH
+config IP_VS_SH
tristate "source hashing scheduling"
---help---
The source hashing scheduling algorithm assigns network
@@ -226,7 +226,7 @@ config IP_VS_SH
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_MH
+config IP_VS_MH
tristate "maglev hashing scheduling"
---help---
The maglev consistent hashing scheduling algorithm provides the
@@ -245,12 +245,12 @@ config IP_VS_MH
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_SED
+config IP_VS_SED
tristate "shortest expected delay scheduling"
---help---
The shortest expected delay scheduling algorithm assigns network
- connections to the server with the shortest expected delay. The
- expected delay that the job will experience is (Ci + 1) / Ui if
+ connections to the server with the shortest expected delay. The
+ expected delay that the job will experience is (Ci + 1) / Ui if
sent to the ith server, in which Ci is the number of connections
on the ith server and Ui is the fixed service rate (weight)
of the ith server.
@@ -258,7 +258,7 @@ config IP_VS_SED
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_NQ
+config IP_VS_NQ
tristate "never queue scheduling"
---help---
The never queue scheduling algorithm adopts a two-speed model.
@@ -306,8 +306,8 @@ config IP_VS_MH_TAB_INDEX
comment 'IPVS application helper'
-config IP_VS_FTP
- tristate "FTP protocol helper"
+config IP_VS_FTP
+ tristate "FTP protocol helper"
depends on IP_VS_PROTO_TCP && NF_CONNTRACK && NF_NAT && \
NF_CONNTRACK_FTP
select IP_VS_NFCT
@@ -322,7 +322,7 @@ config IP_VS_FTP
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
-config IP_VS_NFCT
+config IP_VS_NFCT
bool "Netfilter connection tracking"
depends on NF_CONNTRACK
---help---
@@ -330,9 +330,9 @@ config IP_VS_NFCT
connection state to be exported to the Netfilter framework
for filtering purposes.
-config IP_VS_PE_SIP
+config IP_VS_PE_SIP
tristate "SIP persistence engine"
- depends on IP_VS_PROTO_UDP
+ depends on IP_VS_PROTO_UDP
depends on NF_CONNTRACK_SIP
---help---
Allow persistence based on the SIP Call-ID
diff --git a/net/nfc/hci/Kconfig b/net/nfc/hci/Kconfig
index fd67f51..5b059fc 100644
--- a/net/nfc/hci/Kconfig
+++ b/net/nfc/hci/Kconfig
@@ -1,11 +1,11 @@
config NFC_HCI
- depends on NFC
- tristate "NFC HCI implementation"
- default n
- help
- Say Y here if you want to build support for a kernel NFC HCI
- implementation. This is mostly needed for devices that only process
- HCI frames, like for example the NXP pn544.
+ depends on NFC
+ tristate "NFC HCI implementation"
+ default n
+ help
+ Say Y here if you want to build support for a kernel NFC HCI
+ implementation. This is mostly needed for devices that only process
+ HCI frames, like for example the NXP pn544.
config NFC_SHDLC
depends on NFC_HCI
diff --git a/net/rds/Kconfig b/net/rds/Kconfig
index b909211..d493822 100644
--- a/net/rds/Kconfig
+++ b/net/rds/Kconfig
@@ -22,6 +22,6 @@ config RDS_TCP
This transport does not support RDMA operations.
config RDS_DEBUG
- bool "RDS debugging messages"
+ bool "RDS debugging messages"
depends on RDS
- default n
+ default n
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index 1b9afde..12da119 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -730,8 +730,8 @@ config NET_CLS_ACT
config NET_ACT_POLICE
tristate "Traffic Policing"
- depends on NET_CLS_ACT
- ---help---
+ depends on NET_CLS_ACT
+ ---help---
Say Y here if you want to do traffic policing, i.e. strict
bandwidth limiting. This action replaces the existing policing
module.
@@ -740,9 +740,9 @@ config NET_ACT_POLICE
module will be called act_police.
config NET_ACT_GACT
- tristate "Generic actions"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Generic actions"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to take generic actions such as dropping and
accepting packets.
@@ -750,15 +750,15 @@ config NET_ACT_GACT
module will be called act_gact.
config GACT_PROB
- bool "Probability support"
- depends on NET_ACT_GACT
- ---help---
+ bool "Probability support"
+ depends on NET_ACT_GACT
+ ---help---
Say Y here to use the generic action randomly or deterministically.
config NET_ACT_MIRRED
- tristate "Redirecting and Mirroring"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Redirecting and Mirroring"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to allow packets to be mirrored or redirected to
other devices.
@@ -766,10 +766,10 @@ config NET_ACT_MIRRED
module will be called act_mirred.
config NET_ACT_SAMPLE
- tristate "Traffic Sampling"
- depends on NET_CLS_ACT
- select PSAMPLE
- ---help---
+ tristate "Traffic Sampling"
+ depends on NET_CLS_ACT
+ select PSAMPLE
+ ---help---
Say Y here to allow packet sampling tc action. The packet sample
action consists of statistically choosing packets and sampling
them using the psample module.
@@ -778,9 +778,9 @@ config NET_ACT_SAMPLE
module will be called act_sample.
config NET_ACT_IPT
- tristate "IPtables targets"
- depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
- ---help---
+ tristate "IPtables targets"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ ---help---
Say Y here to be able to invoke iptables targets after successful
classification.
@@ -788,9 +788,9 @@ config NET_ACT_IPT
module will be called act_ipt.
config NET_ACT_NAT
- tristate "Stateless NAT"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Stateless NAT"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to do stateless NAT on IPv4 packets. You should use
netfilter for NAT unless you know what you are doing.
@@ -798,18 +798,18 @@ config NET_ACT_NAT
module will be called act_nat.
config NET_ACT_PEDIT
- tristate "Packet Editing"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Packet Editing"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here if you want to mangle the content of packets.
To compile this code as a module, choose M here: the
module will be called act_pedit.
config NET_ACT_SIMP
- tristate "Simple Example (Debug)"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Simple Example (Debug)"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to add a simple action for demonstration purposes.
It is meant as an example and for debugging purposes. It will
print a configured policy string followed by the packet count
@@ -821,9 +821,9 @@ config NET_ACT_SIMP
module will be called act_simple.
config NET_ACT_SKBEDIT
- tristate "SKB Editing"
- depends on NET_CLS_ACT
- ---help---
+ tristate "SKB Editing"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to change skb priority or queue_mapping settings.
If unsure, say N.
@@ -832,10 +832,10 @@ config NET_ACT_SKBEDIT
module will be called act_skbedit.
config NET_ACT_CSUM
- tristate "Checksum Updating"
- depends on NET_CLS_ACT && INET
- select LIBCRC32C
- ---help---
+ tristate "Checksum Updating"
+ depends on NET_CLS_ACT && INET
+ select LIBCRC32C
+ ---help---
Say Y here to update some common checksum after some direct
packet alterations.
@@ -843,9 +843,9 @@ config NET_ACT_CSUM
module will be called act_csum.
config NET_ACT_VLAN
- tristate "Vlan manipulation"
- depends on NET_CLS_ACT
- ---help---
+ tristate "Vlan manipulation"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to push or pop vlan headers.
If unsure, say N.
@@ -854,9 +854,9 @@ config NET_ACT_VLAN
module will be called act_vlan.
config NET_ACT_BPF
- tristate "BPF based action"
- depends on NET_CLS_ACT
- ---help---
+ tristate "BPF based action"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to execute BPF code on packets. The BPF code will decide
if the packet should be dropped or not.
@@ -866,10 +866,10 @@ config NET_ACT_BPF
module will be called act_bpf.
config NET_ACT_CONNMARK
- tristate "Netfilter Connection Mark Retriever"
- depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
- depends on NF_CONNTRACK && NF_CONNTRACK_MARK
- ---help---
+ tristate "Netfilter Connection Mark Retriever"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ depends on NF_CONNTRACK && NF_CONNTRACK_MARK
+ ---help---
Say Y here to allow retrieving of conn mark
If unsure, say N.
@@ -878,33 +878,33 @@ config NET_ACT_CONNMARK
module will be called act_connmark.
config NET_ACT_SKBMOD
- tristate "skb data modification action"
- depends on NET_CLS_ACT
- ---help---
- Say Y here to allow modification of skb data
+ tristate "skb data modification action"
+ depends on NET_CLS_ACT
+ ---help---
+ Say Y here to allow modification of skb data
- If unsure, say N.
+ If unsure, say N.
- To compile this code as a module, choose M here: the
- module will be called act_skbmod.
+ To compile this code as a module, choose M here: the
+ module will be called act_skbmod.
config NET_ACT_IFE
- tristate "Inter-FE action based on IETF ForCES InterFE LFB"
- depends on NET_CLS_ACT
- select NET_IFE
- ---help---
+ tristate "Inter-FE action based on IETF ForCES InterFE LFB"
+ depends on NET_CLS_ACT
+ select NET_IFE
+ ---help---
Say Y here to allow for sourcing and terminating metadata
For details refer to netdev01 paper:
"Distributing Linux Traffic Control Classifier-Action Subsystem"
- Authors: Jamal Hadi Salim and Damascene M. Joachimpillai
+ Authors: Jamal Hadi Salim and Damascene M. Joachimpillai
To compile this code as a module, choose M here: the
module will be called act_ife.
config NET_ACT_TUNNEL_KEY
- tristate "IP tunnel metadata manipulation"
- depends on NET_CLS_ACT
- ---help---
+ tristate "IP tunnel metadata manipulation"
+ depends on NET_CLS_ACT
+ ---help---
Say Y here to set/release ip tunnel metadata.
If unsure, say N.
@@ -913,16 +913,16 @@ config NET_ACT_TUNNEL_KEY
module will be called act_tunnel_key.
config NET_IFE_SKBMARK
- tristate "Support to encoding decoding skb mark on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb mark on IFE action"
+ depends on NET_ACT_IFE
config NET_IFE_SKBPRIO
- tristate "Support to encoding decoding skb prio on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb prio on IFE action"
+ depends on NET_ACT_IFE
config NET_IFE_SKBTCINDEX
- tristate "Support to encoding decoding skb tcindex on IFE action"
- depends on NET_ACT_IFE
+ tristate "Support to encoding decoding skb tcindex on IFE action"
+ depends on NET_ACT_IFE
config NET_CLS_IND
bool "Incoming device classification"
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 4172204..9393427 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -137,25 +137,25 @@ config CFG80211_REG_RELAX_NO_IR
bool "cfg80211 support for NO_IR relaxation"
depends on CFG80211_CERTIFICATION_ONUS
---help---
- This option enables support for relaxation of the NO_IR flag for
- situations that certain regulatory bodies have provided clarifications
- on how relaxation can occur. This feature has an inherent dependency on
- userspace features which must have been properly tested and as such is
- not enabled by default.
-
- A relaxation feature example is allowing the operation of a P2P group
- owner (GO) on channels marked with NO_IR if there is an additional BSS
- interface which associated to an AP which userspace assumes or confirms
- to be an authorized master, i.e., with radar detection support and DFS
- capabilities. However, note that in order to not create daisy chain
- scenarios, this relaxation is not allowed in cases where the BSS client
- is associated to P2P GO and in addition the P2P GO instantiated on
- a channel due to this relaxation should not allow connection from
- non P2P clients.
-
- The regulatory core will apply these relaxations only for drivers that
- support this feature by declaring the appropriate channel flags and
- capabilities in their registration flow.
+ This option enables support for relaxation of the NO_IR flag for
+ situations that certain regulatory bodies have provided clarifications
+ on how relaxation can occur. This feature has an inherent dependency
on
+ userspace features which must have been properly tested and as such is
+ not enabled by default.
+
+ A relaxation feature example is allowing the operation of a P2P group
+ owner (GO) on channels marked with NO_IR if there is an additional BSS
+ interface which associated to an AP which userspace assumes or
confirms
+ to be an authorized master, i.e., with radar detection support and DFS
+ capabilities. However, note that in order to not create daisy chain
+ scenarios, this relaxation is not allowed in cases where the BSS
client
+ is associated to P2P GO and in addition the P2P GO instantiated on
+ a channel due to this relaxation should not allow connection from
+ non P2P clients.
+
+ The regulatory core will apply these relaxations only for drivers that
+ support this feature by declaring the appropriate channel flags and
+ capabilities in their registration flow.
config CFG80211_DEFAULT_PS
bool "enable powersave by default"
diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig
index 5d43aaa..5ed8b86 100644
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
@@ -2,13 +2,13 @@
# XFRM configuration
#
config XFRM
- bool
- depends on NET
- select GRO_CELLS
- select SKB_EXTENSIONS
+ bool
+ depends on NET
+ select GRO_CELLS
+ select SKB_EXTENSIONS
config XFRM_OFFLOAD
- bool
+ bool
config XFRM_ALGO
tristate
--
1.9.1
