Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <i...@metux.net> --- drivers/staging/android/ion/Kconfig | 2 +- drivers/staging/emxx_udc/Kconfig | 10 ++++----- drivers/staging/fbtft/Kconfig | 12 +++++----- drivers/staging/fwserial/Kconfig | 26 +++++++++++----------- drivers/staging/greybus/Kconfig | 4 ++-- drivers/staging/media/tegra-vde/Kconfig | 4 ++-- drivers/staging/most/Kconfig | 10 ++++----- drivers/staging/nvec/Kconfig | 19 +++++++--------- drivers/staging/pi433/Kconfig | 24 ++++++++++---------- drivers/staging/speakup/Kconfig | 8 +++---- .../staging/vc04_services/bcm2835-audio/Kconfig | 13 +++++------ drivers/staging/vt6655/Kconfig | 9 ++++---- 12 files changed, 67 insertions(+), 74 deletions(-) diff --git a/drivers/staging/android/ion/Kconfig b/drivers/staging/android/ion/Kconfig index 0fdda6f..bba670c9 100644 --- a/drivers/staging/android/ion/Kconfig +++ b/drivers/staging/android/ion/Kconfig @@ -30,7 +30,7 @@ config ION_CHUNK_HEAP bool "Ion chunk heap support" depends on ION help - Choose this option to enable chunk heaps with Ion. This heap is + Choose this option to enable chunk heaps with Ion. This heap is similar in function the carveout heap but memory is broken down into smaller chunk sizes, typically corresponding to a TLB size. Unless you know your system has these regions, you should say N here. diff --git a/drivers/staging/emxx_udc/Kconfig b/drivers/staging/emxx_udc/Kconfig index e50e722..15d99a6e 100644 --- a/drivers/staging/emxx_udc/Kconfig +++ b/drivers/staging/emxx_udc/Kconfig @@ -2,9 +2,9 @@ config USB_EMXX tristate "EMXX USB Function Device Controller" depends on USB_GADGET && (ARCH_RENESAS || (ARM && COMPILE_TEST)) help - The Emma Mobile series of SoCs from Renesas Electronics and - former NEC Electronics include USB Function hardware. + The Emma Mobile series of SoCs from Renesas Electronics and + former NEC Electronics include USB Function hardware. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "emxx_udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "emxx_udc" and force all + gadget drivers to also be dynamically linked. diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig index 84b2e7e..3e504c6 100644 --- a/drivers/staging/fbtft/Kconfig +++ b/drivers/staging/fbtft/Kconfig @@ -94,8 +94,8 @@ config FB_TFT_PCD8544 Generic Framebuffer support for PCD8544 config FB_TFT_RA8875 - tristate "FB driver for the RA8875 LCD Controller" - depends on FB_TFT + tristate "FB driver for the RA8875 LCD Controller" + depends on FB_TFT help Generic Framebuffer support for RA8875 @@ -124,10 +124,10 @@ config FB_TFT_SSD1289 Framebuffer support for SSD1289 config FB_TFT_SSD1305 - tristate "FB driver for the SSD1305 OLED Controller" - depends on FB_TFT - help - Framebuffer support for SSD1305 + tristate "FB driver for the SSD1305 OLED Controller" + depends on FB_TFT + help + Framebuffer support for SSD1305 config FB_TFT_SSD1306 tristate "FB driver for the SSD1306 OLED Controller" diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig index 9c7c926..64cb277 100644 --- a/drivers/staging/fwserial/Kconfig +++ b/drivers/staging/fwserial/Kconfig @@ -1,8 +1,8 @@ config FIREWIRE_SERIAL - tristate "TTY over Firewire" - depends on FIREWIRE && TTY - help - This enables TTY over IEEE 1394, providing high-speed serial + tristate "TTY over Firewire" + depends on FIREWIRE && TTY + help + This enables TTY over IEEE 1394, providing high-speed serial connectivity to cabled peers. This driver implements a ad-hoc transport protocol and is currently limited to Linux-to-Linux communication. @@ -13,18 +13,18 @@ config FIREWIRE_SERIAL if FIREWIRE_SERIAL config FWTTY_MAX_TOTAL_PORTS - int "Maximum number of serial ports supported" - default "64" - help - Set this to the maximum number of serial ports you want the + int "Maximum number of serial ports supported" + default "64" + help + Set this to the maximum number of serial ports you want the firewire-serial driver to support. config FWTTY_MAX_CARD_PORTS - int "Maximum number of serial ports supported per adapter" - range 0 FWTTY_MAX_TOTAL_PORTS - default "32" - help - Set this to the maximum number of serial ports each firewire + int "Maximum number of serial ports supported per adapter" + range 0 FWTTY_MAX_TOTAL_PORTS + default "32" + help + Set this to the maximum number of serial ports each firewire adapter supports. The actual number of serial ports registered is set with the module parameter "ttys". diff --git a/drivers/staging/greybus/Kconfig b/drivers/staging/greybus/Kconfig index b571e4e..ed1ce74 100644 --- a/drivers/staging/greybus/Kconfig +++ b/drivers/staging/greybus/Kconfig @@ -216,7 +216,7 @@ config GREYBUS_USB To compile this code as a module, chose M here: the module will be called gb-usb.ko -endif # GREYBUS_BRIDGED_PHY +endif # GREYBUS_BRIDGED_PHY config GREYBUS_ARCHE tristate "Greybus Arche Platform driver" @@ -227,4 +227,4 @@ config GREYBUS_ARCHE To compile this code as a module, chose M here: the module will be called gb-arche.ko -endif # GREYBUS +endif # GREYBUS diff --git a/drivers/staging/media/tegra-vde/Kconfig b/drivers/staging/media/tegra-vde/Kconfig index 5c49146..0c7d79f 100644 --- a/drivers/staging/media/tegra-vde/Kconfig +++ b/drivers/staging/media/tegra-vde/Kconfig @@ -4,5 +4,5 @@ config TEGRA_VDE select DMA_SHARED_BUFFER select SRAM help - Say Y here to enable support for the NVIDIA Tegra video decoder - driver. + Say Y here to enable support for the NVIDIA Tegra video decoder + driver. diff --git a/drivers/staging/most/Kconfig b/drivers/staging/most/Kconfig index 20047ab..044fa4b 100644 --- a/drivers/staging/most/Kconfig +++ b/drivers/staging/most/Kconfig @@ -1,8 +1,8 @@ menuconfig MOST - tristate "MOST support" + tristate "MOST support" depends on HAS_DMA - default n - ---help--- + default n + ---help--- Say Y here if you want to enable MOST support. This driver needs at least one additional component to enable the desired access from userspace (e.g. character devices) and one that @@ -11,9 +11,7 @@ menuconfig MOST To compile this driver as a module, choose M here: the module will be called most_core. - If in doubt, say N here. - - + If in doubt, say N here. if MOST diff --git a/drivers/staging/nvec/Kconfig b/drivers/staging/nvec/Kconfig index e3a89fb..68636d3 100644 --- a/drivers/staging/nvec/Kconfig +++ b/drivers/staging/nvec/Kconfig @@ -3,11 +3,11 @@ config MFD_NVEC depends on I2C && GPIOLIB && ARCH_TEGRA select MFD_CORE help - Say Y here to enable support for a nVidia compliant embedded - controller. + Say Y here to enable support for a nVidia compliant embedded + controller. - To compile this driver as a module, say M here: the module will be - called mfd-nvec + To compile this driver as a module, say M here: the module will be + called mfd-nvec config KEYBOARD_NVEC tristate "Keyboard on nVidia compliant EC" @@ -17,7 +17,7 @@ config KEYBOARD_NVEC a nVidia compliant embedded controller. To compile this driver as a module, say M here: the module will be - called keyboard-nvec + called keyboard-nvec config SERIO_NVEC_PS2 tristate "PS2 on nVidia EC" @@ -27,8 +27,7 @@ config SERIO_NVEC_PS2 to a nVidia compliant embedded controller. To compile this driver as a module, say M here: the module will be - called serio-nvec-ps2 - + called serio-nvec-ps2 config NVEC_POWER tristate "NVEC charger and battery" @@ -38,8 +37,7 @@ config NVEC_POWER nVidia compliant embedded controllers. To compile this driver as a module, say M here: the module will be - called nvec-power - + called nvec-power config NVEC_PAZ00 tristate "Support for OEM specific functions on Compal PAZ00 based devices" @@ -49,5 +47,4 @@ config NVEC_PAZ00 devices, e.g. Toshbia AC100 and Dynabooks AZ netbooks. To compile this driver as a module, say M here: the module will be - called nvec-paz00 - + called nvec-paz00 diff --git a/drivers/staging/pi433/Kconfig b/drivers/staging/pi433/Kconfig index c734012..bdf50b1 100644 --- a/drivers/staging/pi433/Kconfig +++ b/drivers/staging/pi433/Kconfig @@ -1,16 +1,16 @@ config PI433 - tristate "Pi433 - a 433MHz radio module for Raspberry Pi" - depends on SPI - help - This option allows you to enable support for the radio module Pi433. + tristate "Pi433 - a 433MHz radio module for Raspberry Pi" + depends on SPI + help + This option allows you to enable support for the radio module Pi433. - Pi433 is a shield that fits onto the GPIO header of a Raspberry Pi - or compatible. It extends the Raspberry Pi with the option, to - send and receive data in the 433MHz ISM band - for example to - communicate between two systems without using ethernet or bluetooth - or for control or read sockets, actors, sensors, widely available - for low price. + Pi433 is a shield that fits onto the GPIO header of a Raspberry Pi + or compatible. It extends the Raspberry Pi with the option, to + send and receive data in the 433MHz ISM band - for example to + communicate between two systems without using ethernet or bluetooth + or for control or read sockets, actors, sensors, widely available + for low price. - For details or the option to buy, please visit https://pi433.de/en.html + For details or the option to buy, please visit https://pi433.de/en.html - If in doubt, say N here, but saying yes most probably won't hurt + If in doubt, say N here, but saying yes most probably won't hurt diff --git a/drivers/staging/speakup/Kconfig b/drivers/staging/speakup/Kconfig index d8ec780..c21f086 100644 --- a/drivers/staging/speakup/Kconfig +++ b/drivers/staging/speakup/Kconfig @@ -31,7 +31,6 @@ config SPEAKUP used in conjunction with Speakup. Think of them as video cards for blind people. - The Dectalk pc driver can only be built as a module, and requires software to be pre-loaded on to the card before the module can be loaded. See the decpc choice below @@ -70,7 +69,7 @@ config SPEAKUP_SYNTH_AUDPTR tristate "Audapter synthesizer support" help This is the Speakup driver for the Audapter synthesizer. - You can say y to build it into the kernel, or m to + You can say y to build it into the kernel, or m to build it as a module. See the configuration help on the Speakup choice above for more info. @@ -172,7 +171,7 @@ config SPEAKUP_SYNTH_SPKOUT help This is the Speakup driver for the Speakout synthesizer. - You can say y to build it into the kernel, or m to + You can say y to build it into the kernel, or m to build it as a module. See the configuration help on the Speakup choice above for more info. @@ -195,5 +194,6 @@ config SPEAKUP_SYNTH_DUMMY the kernel, or m to build it as a module. See the configuration help on the Speakup choice above for more info. -endif # SPEAKUP +endif # SPEAKUP + endmenu diff --git a/drivers/staging/vc04_services/bcm2835-audio/Kconfig b/drivers/staging/vc04_services/bcm2835-audio/Kconfig index 62c1c8b..eee68a6 100644 --- a/drivers/staging/vc04_services/bcm2835-audio/Kconfig +++ b/drivers/staging/vc04_services/bcm2835-audio/Kconfig @@ -1,8 +1,7 @@ config SND_BCM2835 - tristate "BCM2835 Audio" - depends on (ARCH_BCM2835 || COMPILE_TEST) && SND - select SND_PCM - select BCM2835_VCHIQ - help - Say Y or M if you want to support BCM2835 built in audio - + tristate "BCM2835 Audio" + depends on (ARCH_BCM2835 || COMPILE_TEST) && SND + select SND_PCM + select BCM2835_VCHIQ + help + Say Y or M if you want to support BCM2835 built in audio diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig index 77cfc70..e45fdaf 100644 --- a/drivers/staging/vt6655/Kconfig +++ b/drivers/staging/vt6655/Kconfig @@ -1,6 +1,5 @@ config VT6655 - tristate "VIA Technologies VT6655 support" - depends on PCI && MAC80211 && m - ---help--- - This is a vendor-written driver for VIA VT6655. - + tristate "VIA Technologies VT6655 support" + depends on PCI && MAC80211 && m + ---help--- + This is a vendor-written driver for VIA VT6655. -- 1.9.1