This driver supports the ILI2117A touch controller. This is
different than the ILI210x and it uses different register and
algorithm so it's a separate driver rather than integrating with
the other.
Signed-off-by: Adam Ford <aford...@gmail.com>
diff --git a/drivers/input/touchscreen/Kconfig
b/drivers/input/touchscreen/Kconfig
index 6c16aaeb4191..ff7cd369514e 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -416,6 +416,18 @@ config TOUCHSCREEN_ILI210X
To compile this driver as a module, choose M here: the
module will be called ili210x.
+config TOUCHSCREEN_ILI2117A
+ tristate "Ilitek ILI2117A Multi-Touch Controller"
+ depends on I2C
+ help
+ Say Y here if you have a ILI2117A based touchscreen
+ controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ili2117a.
+
config TOUCHSCREEN_IPROC
tristate "IPROC touch panel driver support"
depends on ARCH_BCM_IPROC || COMPILE_TEST
diff --git a/drivers/input/touchscreen/Makefile
b/drivers/input/touchscreen/Makefile
index fcc7605fba8d..0290d503bed1 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
+obj-$(CONFIG_TOUCHSCREEN_ILI2117A) += ili2117a.o
obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
diff --git a/drivers/input/touchscreen/ili2117a.c
b/drivers/input/touchscreen/ili2117a.c
new file mode 100644
index 000000000000..c47874ee89f4
--- /dev/null
+++ b/drivers/input/touchscreen/ili2117a.c
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+
+#define MAX_TOUCHES 10
+#define DEFAULT_POLL_PERIOD 20
+#define MAX_X ((1 << 12) - 1)
+#define MAX_Y ((1 << 12) - 1)
+
+/* Touchscreen commands */
+#define TOUCH_INFO 0x00
+
+struct finger {
+ u8 xy;
+ u8 x;
+ u8 y;
+ u8 c_sum;
+} __packed;
+
+struct touchdata {
+ u8 packet_id;
+ struct finger finger[MAX_TOUCHES];
+ u8 key;
+ u8 checksum;
+} __packed;
+
+
+struct ili2117a {
+ struct i2c_client *client;
+ struct input_dev *input;
+ bool (*get_pendown_state)(void);
+ unsigned int poll_period;
+ struct delayed_work dwork;
+ int max_touch;
+};
+
+static int ili2117a_read_reg(struct i2c_client *client, u8 reg, void *buf,
+ size_t len)
+{
+ struct i2c_msg msg[2] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = ®,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = buf,
+ }
+ };
+
+ if (i2c_transfer(client->adapter, msg, 2) != 2) {
+ dev_err(&client->dev, "i2c transfer failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static bool ili2117a_report_events(struct input_dev *input,
+ const struct touchdata *touchdata,
+ int max_touch)
+{
+ int i;
+ bool touch;
+ bool pen_down = 0;
+ u16 x = 0xfff;
+ u16 y = 0xfff;
+ const struct finger *finger;
+
+ for (i = 0; i < max_touch; i++) {
+ touch = 0;
+ input_mt_slot(input, i);
+ finger = &touchdata->finger[i];
+
+ x = finger->x | (((finger->xy & 0xf0) >> 4) << 8);
+ y = finger->y | ((finger->xy & 0x0f) << 8);
+
+ /* This driver returns 0xfff if there is no touch */
+ if (x != 0xfff && y != 0xfff) {
+ touch = 1;
+ pen_down = 1;
+ }
+
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+
+ if (touch) {
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+ }
+ }
+
+ input_mt_report_pointer_emulation(input, false);
+ input_sync(input);
+ return pen_down;
+}
+
+static void ili2117a_work(struct work_struct *work)
+{
+ struct ili2117a *priv = container_of(work, struct ili2117a,
+ dwork.work);
+ struct i2c_client *client = priv->client;
+ struct touchdata touchdata;
+ int error;
+ bool status;
+
+ error = ili2117a_read_reg(client, TOUCH_INFO,
+ (uint8_t *) &touchdata, sizeof(touchdata));
+
+ if (error) {
+ dev_err(&client->dev,
+ "Unable to get touchdata, err = %d\n", error);
+ return;
+ }
+
+ status = ili2117a_report_events(priv->input, &touchdata,
+ priv->max_touch);
+
+ if (status) {
+ schedule_delayed_work(&priv->dwork,
+ msecs_to_jiffies(priv->poll_period));
+ }
+}
+
+static irqreturn_t ili2117a_irq(int irq, void *irq_data)
+{
+ struct ili2117a *priv = irq_data;
+
+ schedule_delayed_work(&priv->dwork, 0);
+
+ return IRQ_HANDLED;
+}
+
+static struct attribute *ili2117a_attributes[] = {
+ NULL,
+};
+
+static const struct attribute_group ili2117a_attr_group = {
+ .attrs = ili2117a_attributes,
+};
+
+static int ili2117a_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct ili2117a *priv;
+ struct input_dev *input;
+ int error;
+ int poll_period;
+ int max_touch;
+
+ if (client->irq <= 0) {
+ dev_err(dev, "No IRQ!\n");
+ return -EINVAL;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!priv || !input) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ priv->client = client;
+ priv->input = input;
+
+ error = device_property_read_u32(dev, "ili2117a,poll-period",
+ &poll_period);
+ priv->poll_period = error ? DEFAULT_POLL_PERIOD : poll_period;
+
+ error = device_property_read_u32(dev, "ili2117a,max-touch",
+ &max_touch);
+ if (max_touch > MAX_TOUCHES)
+ max_touch = MAX_TOUCHES;
+ priv->max_touch = error ? MAX_TOUCHES : max_touch;
+
+ INIT_DELAYED_WORK(&priv->dwork, ili2117a_work);
+
+ /* Setup input device */
+ input->name = "ili2117a Touchscreen";
+ input->id.bustype = BUS_I2C;
+ input->dev.parent = dev;
+
+ __set_bit(EV_SYN, input->evbit);
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(EV_ABS, input->evbit);
+ __set_bit(BTN_TOUCH, input->keybit);
+
+ /* Single touch */
+ input_set_abs_params(input, ABS_X, 0, MAX_X, 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, MAX_Y, 0, 0);
+
+ /* Multi touch */
+ input_mt_init_slots(input, priv->max_touch, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, MAX_X, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, MAX_Y, 0, 0);
+
+ i2c_set_clientdata(client, priv);
+
+ error = devm_request_threaded_irq(dev, client->irq, NULL,
+ ili2117a_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ client->name, priv);
+
+ if (error) {
+ dev_err(dev, "Failed to request irq, err: %d\n", error);
+ goto err_free_mem;
+ }
+
+ error = sysfs_create_group(&dev->kobj, &ili2117a_attr_group);
+ if (error) {
+ dev_err(dev, "Unable to create sysfs attributes, err: %d\n",
+ error);
+ goto err_free_irq;
+ }
+
+ error = input_register_device(priv->input);
+ if (error) {
+ dev_err(dev, "Cannot register input device, err: %d\n", error);
+ goto err_remove_sysfs;
+ }
+
+ device_init_wakeup(dev, 1);
+ return 0;
+
+err_remove_sysfs:
+ sysfs_remove_group(&dev->kobj, &ili2117a_attr_group);
+err_free_irq:
+ free_irq(client->irq, priv);
+err_free_mem:
+ input_free_device(input);
+ kfree(priv);
+ return error;
+}
+
+static int ili2117a_i2c_remove(struct i2c_client *client)
+{
+ struct ili2117a *priv = i2c_get_clientdata(client);
+
+ sysfs_remove_group(&client->dev.kobj, &ili2117a_attr_group);
+ free_irq(priv->client->irq, priv);
+ cancel_delayed_work_sync(&priv->dwork);
+ input_unregister_device(priv->input);
+ kfree(priv);
+
+ return 0;
+}
+
+static int __maybe_unused ili2117a_i2c_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static int __maybe_unused ili2117a_i2c_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ili2117a_i2c_pm,
+ ili2117a_i2c_suspend, ili2117a_i2c_resume);
+
+static const struct of_device_id ili_match_table[] = {
+ { .compatible = "ilitek,ili2117a" },
+ { },
+};
+
+static const struct i2c_device_id ili2117a_i2c_id[] = {
+ { "ili2117a", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ili2117a_i2c_id);
+
+static struct i2c_driver ili2117a_ts_driver = {
+ .driver = {
+ .name = "ili2117a_i2c",
+ .pm = &ili2117a_i2c_pm,
+ .of_match_table = of_match_ptr(ili_match_table),
+ },
+ .id_table = ili2117a_i2c_id,
+ .probe = ili2117a_i2c_probe,
+ .remove = ili2117a_i2c_remove,
+};
+
+module_i2c_driver(ili2117a_ts_driver);
+
+MODULE_AUTHOR("Adam Ford <adam.f...@logicpd.com>");
+MODULE_DESCRIPTION("ili2117a I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
--
2.17.1
