Ping...
Hi, Eduardo
Can you take a look at this thread? Thanks.
Best Regards!
Anson Huang
> -----Original Message-----
> From: Anson Huang
> Sent: 2019年3月6日 13:27
> To: 'Rob Herring' <[email protected]>; '[email protected]'
> <[email protected]>
> Cc: '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>; '[email protected]'
> <[email protected]>; '[email protected]'
> <[email protected]>; '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>; '[email protected]'
> <[email protected]>; '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>; Aisheng Dong
> <[email protected]>; '[email protected]'
> <[email protected]>; '[email protected]' <[email protected]>; Daniel
> Baluta <[email protected]>; Andy Gross <[email protected]>;
> '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>; '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>; '[email protected]'
> <[email protected]>; '[email protected]'
> <[email protected]>; '[email protected]' <linux-
> [email protected]>; '[email protected]' <linux-arm-
> [email protected]>; '[email protected]' <linux-
> [email protected]>; dl-linux-imx <[email protected]>
> Subject: RE: [PATCH V10 1/4] dt-bindings: fsl: scu: add thermal binding
>
> Ping...
>
> Hi, Eduardo
> Looks like we are going around in circle, can we make decision of
> which direction to go?
>
> Best Regards!
> Anson Huang
>
> > -----Original Message-----
> > From: Anson Huang
> > Sent: 2019年3月1日 9:41
> > To: 'Rob Herring' <[email protected]>; [email protected]
> > Cc: [email protected]; [email protected];
> [email protected];
> > [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected]; [email protected];
> > [email protected]; Aisheng Dong <[email protected]>;
> > [email protected]; [email protected]; Daniel Baluta
> > <[email protected]>; Andy Gross <[email protected]>;
> > [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected];
> > linux- [email protected]; dl-linux-imx <[email protected]>
> > Subject: RE: [PATCH V10 1/4] dt-bindings: fsl: scu: add thermal
> > binding
> >
> > Hi, Rob/Eduardo
> >
> > Best Regards!
> > Anson Huang
> >
> > > -----Original Message-----
> > > From: Rob Herring [mailto:[email protected]]
> > > Sent: 2019年2月28日 22:49
> > > To: Anson Huang <[email protected]>
> > > Cc: [email protected]; [email protected];
> > [email protected];
> > > [email protected]; [email protected];
> [email protected];
> > > [email protected]; [email protected]; [email protected];
> > > [email protected]; Aisheng Dong <[email protected]>;
> > > [email protected]; [email protected]; Daniel Baluta
> > > <[email protected]>; Andy Gross <[email protected]>;
> > > [email protected]; [email protected]; [email protected];
> > > [email protected]; [email protected];
> > > [email protected]; [email protected];
> > > [email protected]; [email protected]; [email protected];
> > > [email protected]; [email protected];
> > > linux- [email protected]; dl-linux-imx <[email protected]>
> > > Subject: Re: [PATCH V10 1/4] dt-bindings: fsl: scu: add thermal
> > > binding
> > >
> > > On Wed, Feb 27, 2019 at 6:48 PM Anson Huang <[email protected]>
> > > wrote:
> > > >
> > > > Hi, Rob
> > > >
> > > > Best Regards!
> > > > Anson Huang
> > > >
> > > > > -----Original Message-----
> > > > > From: Rob Herring [mailto:[email protected]]
> > > > > Sent: 2019年2月28日 7:55
> > > > > To: Anson Huang <[email protected]>
> > > > > Cc: [email protected]; [email protected];
> > > > > [email protected]; [email protected];
> > [email protected];
> > > > > [email protected]; [email protected];
> > [email protected];
> > > > > [email protected]; [email protected]; Aisheng Dong
> > > > > <[email protected]>; [email protected];
> > > > > [email protected]; Daniel Baluta <[email protected]>; Andy
> > > > > Gross <[email protected]>; [email protected];
> > > > > [email protected]; [email protected]; [email protected];
> > > > > [email protected]; [email protected];
> > > > > [email protected]; [email protected];
> > > > > [email protected]; [email protected];
> > > > > [email protected];
> > > > > [email protected];
> > > > > linux- [email protected]; dl-linux-imx <[email protected]>
> > > > > Subject: Re: [PATCH V10 1/4] dt-bindings: fsl: scu: add thermal
> > > > > binding
> > > > >
> > > > > On Wed, Feb 27, 2019 at 08:46:21AM +0000, Anson Huang wrote:
> > > > > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> > > > > > system controller, the system controller is in charge of
> > > > > > system power, clock and thermal sensors etc. management, Linux
> > > > > > kernel has to communicate with system controller via MU
> > > > > > (message unit) IPC to get temperature from thermal sensors,
> > > > > > this patch adds binding doc for i.MX system controller thermal
> driver.
> > > > > >
> > > > > > Signed-off-by: Anson Huang <[email protected]>
> > > > > > ---
> > > > > > Changes since V9:
> > > > > > - change #thermal-sensor-cells value in example to 1,
> > > > > > since there are
> > > > > other
> > > > > > thermal sensors inside system controller, it is just
> > > > > > because there are
> > > > > still
> > > > > > some issue, so system controller does NOT expose them
> > > > > > for now,
> > > > > they could
> > > > > > be exposed later, so it should be 1 from HW perspective.
> > > > > > ---
> > > > > > .../devicetree/bindings/arm/freescale/fsl,scu.txt | 21
> > > > > +++++++++++++++++++++
> > > > > > 1 file changed, 21 insertions(+)
> > > > > >
> > > > > > diff --git
> > > > > > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > > > > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > > > > index 72d481c..855270b 100644
> > > > > > ---
> > > > > > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > > > > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.
> > > > > > +++ tx
> > > > > > +++ t
> > > > > > @@ -122,6 +122,21 @@ RTC bindings based on SCU Message
> > Protocol
> > > > > > Required properties:
> > > > > > - compatible: should be "fsl,imx8qxp-sc-rtc";
> > > > > >
> > > > > > +Thermal bindings based on SCU Message Protocol
> > > > > > +------------------------------------------------------------
> > > > > > +
> > > > > > +Required properties:
> > > > > > +- compatible: Should be :
> > > > > > + "fsl,imx8qxp-sc-thermal"
> > > > > > + followed by "fsl,imx-sc-thermal";
> > > > > > +
> > > > > > +- #thermal-sensor-cells: See
> > > > > Documentation/devicetree/bindings/thermal/thermal.txt
> > > > > > + for a description.
> > > > > > +
> > > > > > +- imx,sensor-resource-id: A single integer for single
> > > > > > +thermal zone's
> > > > > resource ID or
> > > > > > + an array of integers to specify
> > > > > > + each thermal
> > > > > zone's sensor
> > > > > > + resource ID.
> > > > >
> > > > > Can't you put the resource ids in the thermal-sensor cells? Why
> > > > > do you need to list them here?
> > > >
> > > > For the thermal-sensor cells, if you meant the argument of tsens
> > > > phandle, then the reason is that argument is for sensor index
> > > > starting from 0, previous I use it for our resource ID, but it
> > > > looks confused, since user will think there are many sensors there
> > > > per
> > Eduardo's comment.
> > > >
> > > > + thermal-sensors = <&tsens 0>;
> > > >
> > > > If you meant putting it in each thermal sensor node instead of "tsens"
> > > > node, then in previous patch series, I put this "
> > > > imx,sensor-resource-id " property in each thermal sensor node, but
> > > > the thermal sensor nodes are parsed by common thermal framework,
> > > > thermal driver will need to find the thermal zone node and go
> > > > through every child node to get the resource id again, so Eduardo
> > > > suggested to put it in
> > > our platform tsens node, that makes our thermal driver code much
> > > more simple.
> > >
> > > The phandle args are meant to be an id typically. There's absolutely
> > > no requirement they are 0-N based. They often are because things
> > > like interrupts are 0-N or clocks have no h/w id. If you already have an
> > > id,
> use it.
> > > Don't invent your own.
> >
> > At the beginning, I put the HW resource ID in the "tsens" phandle
> > argument of "thermal-sensors" node, see below patch I sent before,
> > the benefit is I do NOT need to add new property for passing HW
> > resource ID to driver, the disadvantage is, I have to parse the
> > thermal_zones' each child node and get the HW resource ID from phandle
> > argument(searing thermal_zones node and go through all its child node,
> > and get the phandle argument), they are by default ONLY parsed by
> > thermal core driver. When we register thermal zone, we have to pass
> > the HW resource ID when calling
> > devm_thermal_zone_of_sensor_register(), if we add our own property to
> > pass the HW resource ID, then no need to do so, we just pass the index
> > 0-N for each thermal sensors in devicetree which also with phandle
> argument 0- N. So using our own property makes the driver much more
> simple.
> >
> > So, @Eduardo, which direction I should go? Looks like Rob suggests
> > just put the HW resource ID in the phandle argument like what I did at
> > the beginning, can you advise?
> >
> > Thanks,
> > Anson.
> >
> > https://patchwork.kernel.org/patch/10703849/
> > > + thermal_zones: thermal-zones {
> > > + cpu-thermal0 {
> > > + polling-delay-passive = <250>;
> > > + polling-delay = <2000>;
> > > + thermal-sensors = <&tsens 355>;
> > > + trips {
> > > + cpu_alert0: trip0 {
> > > + temperature = <107000>;
> > > + hysteresis = <2000>;
> > > + type = "passive";
> > > + };
> >
> > >
> > > Rob
