Also rename its regulator to match the schematic names.
Signed-off-by: Alexis Ballier <[email protected]>
Cc: [email protected]
Cc: Heiko Stuebner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
.../boot/dts/rockchip/rk3399-orangepi.dts | 26 +++++++++++++++----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 96ccbe5c4f0c..2166be171df8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -136,13 +136,13 @@
vin-supply = <&vcc_sys>;
};
- vcc5v0_typec0: vcc5v0-typec0-regulator {
+ vbus_typec: vbus-typec-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec0_en>;
- regulator-name = "vcc5v0_typec0";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vbus_typec";
vin-supply = <&vcc_sys>;
};
@@ -505,6 +505,16 @@
pinctrl-0 = <&light_int_l>;
vdd-supply = <&vcc3v3_s3>;
};
+
+ fusb302@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&chg_cc_int_l>;
+ vbus-supply = <&vbus_typec>;
+ };
};
&io_domains {
@@ -547,7 +557,7 @@
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
- vcc5v0_typec0_en: vcc5v0-typec0-en {
+ vcc5v0_typec_en: vcc5v0-typec-en {
rockchip,pins =
<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -596,6 +606,12 @@
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ fusb302 {
+ chg_cc_int_l: chg-cc-int-l {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
};
&pwm0 {
@@ -677,7 +693,7 @@
status = "okay";
u2phy0_otg: otg-port {
- phy-supply = <&vcc5v0_typec0>;
+ phy-supply = <&vbus_typec>;
status = "okay";
};
--
2.21.0
