Hi, Looks good to me. But just there is minor one comment as following: - 2018 -> 2019
On 19. 3. 18. 오후 6:52, Andy Shevchenko wrote: > We are going to use some definitions in the other Intel extcon drivers, > thus, split out them to a common header file. > > Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com> > --- > drivers/extcon/extcon-intel-cht-wc.c | 21 +++++++-------------- > drivers/extcon/extcon-intel.h | 20 ++++++++++++++++++++ > 2 files changed, 27 insertions(+), 14 deletions(-) > create mode 100644 drivers/extcon/extcon-intel.h > > diff --git a/drivers/extcon/extcon-intel-cht-wc.c > b/drivers/extcon/extcon-intel-cht-wc.c > index 5ef215297101..110bd38a4d24 100644 > --- a/drivers/extcon/extcon-intel-cht-wc.c > +++ b/drivers/extcon/extcon-intel-cht-wc.c > @@ -17,6 +17,8 @@ > #include <linux/regmap.h> > #include <linux/slab.h> > > +#include "extcon-intel.h" > + > #define CHT_WC_PHYCTRL 0x5e07 > > #define CHT_WC_CHGRCTRL0 0x5e16 > @@ -65,15 +67,6 @@ > #define CHT_WC_VBUS_GPIO_CTLO_DRV_OD BIT(4) > #define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT BIT(5) > > -enum cht_wc_usb_id { > - USB_ID_OTG, > - USB_ID_GND, > - USB_ID_FLOAT, > - USB_RID_A, > - USB_RID_B, > - USB_RID_C, > -}; > - > enum cht_wc_mux_select { > MUX_SEL_PMIC = 0, > MUX_SEL_SOC, > @@ -101,9 +94,9 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data > *ext, int pwrsrc_sts) > { > switch ((pwrsrc_sts & CHT_WC_PWRSRC_USBID_MASK) >> > CHT_WC_PWRSRC_USBID_SHIFT) { > case CHT_WC_PWRSRC_RID_GND: > - return USB_ID_GND; > + return INTEL_USB_ID_GND; > case CHT_WC_PWRSRC_RID_FLOAT: > - return USB_ID_FLOAT; > + return INTEL_USB_ID_FLOAT; > case CHT_WC_PWRSRC_RID_ACA: > default: > /* > @@ -111,7 +104,7 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data > *ext, int pwrsrc_sts) > * the USBID GPADC channel here and determine ACA role > * based on that. > */ > - return USB_ID_FLOAT; > + return INTEL_USB_ID_FLOAT; > } > } > > @@ -221,7 +214,7 @@ static void cht_wc_extcon_pwrsrc_event(struct > cht_wc_extcon_data *ext) > } > > id = cht_wc_extcon_get_id(ext, pwrsrc_sts); > - if (id == USB_ID_GND) { > + if (id == INTEL_USB_ID_GND) { > /* The 5v boost causes a false VBUS / SDP detect, skip */ > goto charger_det_done; > } > @@ -248,7 +241,7 @@ static void cht_wc_extcon_pwrsrc_event(struct > cht_wc_extcon_data *ext) > ext->previous_cable = cable; > } > > - ext->usb_host = ((id == USB_ID_GND) || (id == USB_RID_A)); > + ext->usb_host = ((id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A)); > extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host); > } > > diff --git a/drivers/extcon/extcon-intel.h b/drivers/extcon/extcon-intel.h > new file mode 100644 > index 000000000000..455986b2b004 > --- /dev/null > +++ b/drivers/extcon/extcon-intel.h > @@ -0,0 +1,20 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Header file for Intel extcon hardware > + * > + * Copyright (C) 2018 Intel Corporation. All rights reserved. 2018 -> 2019 > + */ > + > +#ifndef __EXTCON_INTEL_H__ > +#define __EXTCON_INTEL_H__ > + > +enum extcon_intel_usb_id { > + INTEL_USB_ID_OTG, > + INTEL_USB_ID_GND, > + INTEL_USB_ID_FLOAT, > + INTEL_USB_RID_A, > + INTEL_USB_RID_B, > + INTEL_USB_RID_C, > +}; > + > +#endif /* __EXTCON_INTEL_H__ */ > -- Best Regards, Chanwoo Choi Samsung Electronics