Add DT binding document for Stingray USB PHY.
Signed-off-by: Srinath Mannam <srinath.man...@broadcom.com>
Reviewed-by: Rob Herring <r...@kernel.org>
---
.../bindings/phy/brcm,stingray-usb-phy.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
new file mode 100644
index 0000000..4ba2989
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
@@ -0,0 +1,32 @@
+Broadcom Stingray USB PHY
+
+Required properties:
+ - compatible : should be one of the listed compatibles
+ - "brcm,sr-usb-combo-phy" is combo PHY has two PHYs, one SS and one HS.
+ - "brcm,sr-usb-hs-phy" is a single HS PHY.
+ - reg: offset and length of the PHY blocks registers
+ - #phy-cells:
+ - Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate
+ the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY.
+ - Must be 0 for brcm,sr-usb-hs-phy.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+ usbphy0: usb-phy@0 {
+ compatible = "brcm,sr-usb-combo-phy";
+ reg = <0x00000000 0x100>;
+ #phy-cells = <1>;
+ };
+
+ usbphy1: usb-phy@10000 {
+ compatible = "brcm,sr-usb-combo-phy";
+ reg = <0x00010000 0x100>,
+ #phy-cells = <1>;
+ };
+
+ usbphy2: usb-phy@20000 {
+ compatible = "brcm,sr-usb-hs-phy";
+ reg = <0x00020000 0x100>,
+ #phy-cells = <0>;
+ };
--
2.7.4
