On Wed, 13 Mar 2019 at 22:45, Sowjanya Komatineni <skomatin...@nvidia.com> wrote: > > Default tap and trim values are incorrect for Tegra186 SDMMC4. > This patch fixes it. > > Tested-by: Jon Hunter <jonath...@nvidia.com> > Signed-off-by: Sowjanya Komatineni <skomatin...@nvidia.com>
Is this a fix and/or for stable? In either case, I am leaving this for arm-soc. Kind regards Uffe > --- > arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi > b/arch/arm64/boot/dts/nvidia/tegra186.dtsi > index 97aeb946ed5e..472f55fe9488 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi > +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi > @@ -317,8 +317,8 @@ > nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; > nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; > nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>; > - nvidia,default-tap = <0x5>; > - nvidia,default-trim = <0x9>; > + nvidia,default-tap = <0x9>; > + nvidia,default-trim = <0x5>; > nvidia,dqs-trim = <63>; > mmc-hs400-1_8v; > status = "disabled"; > -- > 2.7.4 >
